There are indeed trailer hitch receivers that fit your 2022 Nissan Rogue Sport; I went ahead and verified these fits directly with the manufacturers for you. The fits are the following:
- Curt Trailer Hitch Receiver # C13377
- etrailer Trailer Hitch Receiver # e79YR
These hitches are very much the same, with the same installation and the same bumper and ground clearances, so I recommend going with whichever one is the best price.
The only other thing I wanted to mention, in case you... view full answer...
We do have a trailer hitch fit for your 2022 Nissan Rogue Sport with the etrailer Trailer Hitch Receiver # e79YR!
If you let me know what you are wanting to use the trailer hitch for I can make some recommendations for you. view full answer...
The etrailer Trailer Hitch Receiver part # e79YR which is a fit for a 2019 Nissan Rogue Sport also fits the following:
2017 - 2022 Nissan Rogue Sport
If you need replacement hardware, we do offer this as the Replacement Hardware Kit part # RHK. view full answer...
The Curt Trailer Hitch Receiver part # C13377 and the etrailer Trailer Hitch Receiver part # e79YR which are the two trailer hitch options for your 2019 Nissan Rogue Sport have the same ground clearance measurement. This ground clearance measurement will be around 12-1/2" from the ground to the top inside edge of the receiver tube opening or 10" from the ground to the bottom of the receiver tube collar. Please note that these measurements are not exact and can vary slightly based on tire... view full answer...
There is not a replacement hitch pin for the old Reese Outfitter bike rack, and the hitch pin you mentioned won't work with the rack, so if you are missing yours, or the hitch pin is damaged to the point that you can't use it with the Outfitter then you would need a replacement rack. The good news is there is a similar, cost-friendly option for you:
- Swagman 4 Bike Rack for 2" Hitches # S64940.
The # S64940 4-bike rack is easy to use, with simple rotating cradles. It also comes with... view full answer...
If the bolt won't go in the weld nut of the Curt Trailer Hitch Receiver # C13377, the issue is almost certainly that the weld nuts are dirty and thus stopping the bolt from catching.
What you'll want to do is clean the weld nut with a brush and lubricant, and I have added a link below to a help article which details exactly how to accomplish this. view full answer...
I have a solution for you, however, there is currently no carrier available that is able to safely carry 2 kayaks and 1 SUP. You will need to get 2 individual carriers.
In order to mount 2 kayaks and 1 SUP on your 2020 Nissan Rogue Sport with factory crossbars, you will first need to check the weight limit of your roof by contacting the manufacturer or looking in the owner's manual. Also, measure your crossbars along with your kayaks and sup to determine if they will safely fit on your... view full answer...
When installing Draw-Tite trailer hitch # 76177 on your 2017 Nissan Rogue Sport you will use the included hardware on the driver's side. There are 2 bolts and 2 blocks that will get fed into the frame. The threaded ends will exit through 2 of the holes in your picture, through the holes in the hitch, and secured with washers and nuts.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one... view full answer...
From side to side, the bolt holes on the Curt # 13377 are all the same distance apart at 42.46 inches center to center. From the rear to the front, the distance from the first hole to the second hole is 2.804 inches. The distance from the second, or middle, hole to the hole closest to the front of the vehicle is 3.673 inches. This is the same for both sides of the hitch. I have provided a diagram showing these measurements for your reference. view full answer...
The etrailer Trailer Hitch Receiver # e79YR is confirmed to fit your 2022 Nissan Rogue Sport and has the 2" receiver that you are needing. This hitch is made in the USA, has a bolt-on, no-drill installation and has a nice matte black finish. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing, you can round out a tow package by adding the Curt T-Connector Vehicle Wiring Harness # C33HR... view full answer...
A trailer hitch receiver for your 2017 Nissan Rogue Sport like the # e79YR has a tongue weight capacity of 525 lbs. From what I have found, the EZ GO scooter weighs approximately 100 lbs, although I'm not sure what model you will have. You will also need to factor in the weight of the carrier for the scooter. The hitch itself can definitely handle the weight of the two combined.
However, you will need to make sure you do not exceed the tongue weight capacity of your vehicle. I recommend... view full answer...
The GearDeck 17 Enclosed Cargo Carrier item # H00604 fits a standard 2" x 2" hitch receiver. If your 2019 Nissan Rogue Sport has a 2" receiver like the Curt item # C13377, this cargo carrier will fit your vehicle. This lockable carrier is 46-1/2" x 24" x 25" and has a 300 lbs capacity. view full answer...
That's an excellent question, and while there is a maximum crossbar thickness, there isn't actually a minimum crossbar thickness for the Swagman Fork Down Roof Mounted Bike Carrier # S64710.
There is a maximum crossbar thickness because the mounting hardware uses clamps with U-bolts that are only so wide, but so long as your crossbars are less than 3 inches in width, the Swagman Fork Down Roof Mounted Bike Carrier # S64710 will easily mount right to your crossbars. view full answer...
The AirBedz XUV Air Mattress w/ Built-In Battery-Powered Pump # 341030 will fit in your 2020 Nissan Rogue Sport just fine even if the backseats don't fold all the way flat. If you check out the linked video of this on a 2015 Toyota 4Runner you'll see that we didn't have the seat all the way flat and we were still able to use it.
The mattress is 66" long x 52" wide (43" at the tailgate) so at 6'3" you won't be able to lay out straight but you could lay a little diagonal and curl up some... view full answer...
The Curt Trailer Hitch Receiver # C13377 has a shipping weight of 36 lbs so after you take off the packaging it will weight 30 lbs.
It does have a max gross trailer weight rating of 3,500 lbs and a max tongue weight rating of 525 lbs. This trailer hitch is confirmed to fit a 2017 - 2018 Nissan Rogue Sport. view full answer...
The etrailer Class III hitch you mentioned, part # e79YR is a fit for your 2019 Nissan Rogue Sport. We estimate that an experienced installer should be able to complete the install in about an hour. Any trusted mechanic should be able to handle the installation with no problem. What you'll pay for the installation will depend on the going rate for hourly ship labor in your area. I've linked you to some installation videos that I hope you'll find helpful.
If you'll be towing a small trailer,... view full answer...
Hey Jerry, If you have Yakima RoundBars like # Y00408 on your '22 Nissan Rogue then you'll want the Replacement End Caps for Yakima RoundBars # Y8007026. view full answer...
The trailer wiring harness I recommend for a 2017 Nissan Rouge is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118480. This is a plug-in-pay option that provide a simple 4-way/4-pole connector. This is most common on small trailers. view full answer...
This is a great question, and it really comes down to the fact that manufacturers will make just about anything that there is a demand for and a hitch provides more functionality than just towing a trailer. A lot of users prefer to use hitch mounted cargo carriers or bike racks like the Kuat Transfer 2 # KU74FR on their trailer hitches to transport different things from place to place, instead of using the interior cargo space.
For your 2019 Nissan Rogue Sport, I recommend using the Curt... view full answer...
Go To Results