For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.
To install this in your 2016 Nissan NV 2500 all you need is the correct install harness part # 3050-P which is a confirmed fit.
On your vehicle... view full answer...
I have another suspension enhancement option for you, but at this time there is not a Firestore or Air Lift Air Helper Spring Kit that is confirmed to fit your 2020 Nissan NV 2500. While you are correct that the 5.6l V8 engine is the same engine used in the Nissan Titan, the suspension is different between the two.
For your NV 2500 I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3614-T as it offers 2000lbs of support for your suspension, but also due to it... view full answer...
The van-mounted rack you mentioned won't fit your 2012 Nissan NV 2500, but we do have a way for you to carry a bike rack, which is with a hitch and hitch-mounted rack. Let's start with the hitch, and the best option that fits your NV 2500 is from Draw-Tite:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 75715
The reason the Draw-Tite is the best for your van is because it offers the most ground and bumper clearance for your rack, which is going to keep it safe from contact with both your... view full answer...
You will have to hardwire in a brake controller to your 2012 Nissan NV 2500 as there isn't a plug or port under the dash for quick installs.
You will need to start with a 4-way (if you do not have one). For that you would want the # 118553.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video... view full answer...
I do have an option to install a platform tray on top of a 2018 Nissan NV 2500 High Roof but there are no options through Rhino Rack currently. Instead, you'd need to first install a Yakima Roof Rack part # Y01158, part # Y03541, part # Y53TR, part # Y00221. Then you could use this to install a Yakima Platform Trap part # Y05046 and part # Y05039 (2).
In regards to modifying the platform, I could not recommend this. view full answer...
We have suspension enhancement kits that fit your 2014 Nissan NV 2500 like the Timbren part # TNRNVHD but we do not have any air bag kits that fit. view full answer...
The difference between the # VRNV11 and # VTNV11 that you referenced is that the # VTNV11 is made of thermoplastic whereas the # VRNV11 is made of carpet.
The thermoplastic liner is a heavier, denser mat at 32 lbs when compared to the carpet version that is 18 lbs so it would be a better insulator so I would recommend it for you. Either would also fit with the factory floor liner removed and would work equally well with wire racks. view full answer...
Ideally when setting the Rightline Tent part # RL110907 up you have a second person, but that said we've had more than a few people come back and say that they were able to set the tent up by themselves. I'd recommend maybe having a second person with you to practice set it up once and then from there you'd have a pretty good idea how to go about setting it up by yourself.
This is liste as a fit for your 2017 Nissan NV 2500 as well. I hope we someday do an assembly video for this tent!... view full answer...
The Draw Tite hitch part # 75715 is the hitch I would recommend for your 2019 Nissan NV 2500 as it has the most towing capacity and has the easiest install.
I attached an install video for this for you to check out as well. view full answer...
In order to install a bike rack on the back of your 2019 Nissan NV2500 when pulling a camper, you could use Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275. This mounts to the tongue of A-Frame trailers with widths between 12" - 52". The mounting bracket dimensions are 8" tall, 4-3/4" wide, and 2" deep; so you will want to compare this to your trailer to determine compatibility. You can add a 2-bike rack to this bike rack carrier such as Swagman... view full answer...
For your 2017 Nissan NV 2500 we have the replacement towing mirror part # KS68124N. The install isn't too difficult. Its basically just removing a few panels on the door like what you did on your older truck.
We don't have the replacement clips you mentioned. view full answer...
Though I may have another option, I checked with Firestone and Air Lift and, unfortunately, neither currently make a kit that will fit a 2017 Nissan NV 2500.
With that being said, the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3614-T is a highly recommended product. These do a very good job of helping with squat issues as well body roll and sway. The install is pretty quick and easy, and as long as you can jack your vehicle up by the frame, it is also pretty easy to... view full answer...
You will need to start with a 4-way (if you do not have one). For that you would want the # 118553.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller... view full answer...
Since you ordered the factory 7-Way from Nissan for your 2015 Nissan NV 2500 that means that to install a brake controller like our best selling P3 # 90195 that you referenced all you need is the install harness part # 3050-P and you'll be set. view full answer...
I looked up the Rad Power Wagon, that spec shows a weight of 77 lbs. and depending on which model of the step through, those can weigh almost 70 lbs. Since you state that the other two are about 45 lbs. each, for that amount of combined weight you will be challenged to find a bike rack that has a listed weight rating needed.
You can possibly use the Kuat NV 2.0 Bike Rack for 4 Bikes, # NV22G-NA22G if you can reduce each bikes weight enough to meet the 40 lbs. per bike rating of this rack.... view full answer...
We have a few trailer hitches available that are confirmed to fit your 2018 Nissan NV 2500. I specifically recommend the Curt Class IV # C14000 because it offers the highest weight capacities (10,000 pounds towing and 1,000 pounds tongue) indicating a stronger hitch and it is made right here in the USA. It will also use existing holes in the van's frame for a completely bolt-on (no-drill) installation.
I have attached an installation video that you can also use for reference. All the... view full answer...
First thing you should do at this point is test the 7-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached.
If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue.
Make sure that the trailer side connector are clean... view full answer...
If you are needing a trailer wiring harness for the 2018 Nissan NV 2500 that you have listed in the vehicle fit guide that will work with the Mounting Bracket # 18144, I recommend the Tekonsha T-One # 118553. This custom harness will plug into factory ports behind trim panels in the rear cargo area of the NV 2500 and the 4-Way will fit inside the bracket opening.
If you are just looking for a universal hardware harness the Tekonsha 4-Pole # 18252 will work and is compatible with the bracket... view full answer...
I would recommend the Strait Line weight distribution system part # RP66083 which has a tongue weight range of 400-800 lbs and features only sway control that works to prevent sway before it starts.
For a brake controller I really like the Redarc Tow Pro Liberty part # RED24FR which only puts a small knob on your dash instead of a big controller box and is proportional instead of time based. To install it in your 2020 Nissan NV 2500 would only require the install harness part # RED39FR... view full answer...
Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75715 will work for your 2012 Nissan NV 2500. Your Nissan will have a tow rating between 7000lbs and 9500lbs. You can contact Nissan for your exact tow rating by VIN number. The Draw-tite will allow for up to 7,000lbs towing and 1,125lbs of tongue weight. If you are using a weight distribution hitch the ratings are 10,000lbs towing and 1,000lbs of tongue weight.
You will want to verify the weights of both your VW Passat and U-Haul... view full answer...
Go To Results