I have an excellent solution for you. Thule offers the Thule Passive Lock Strap # TH533. This puck and strap security system will work for you because it will be secured by your 2011 Nissan Juke's rear hatch. To properly install this lock strap you will loop it around your trunk mounted rack and by placing the puck into the cargo area of your trunk and locking your vehicle the bike rack becomes locked to your vehicle. The Passive Lock is made with steel cables that are wrapped in nylon... view full answer...
I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24892 for your 2016 Nissan Juke SV FWD. With the Draw-Tite receiver you are not required to use a Stabilizing Strap # 18050 with a hitch mounted accessory, which the Curt # C11302 does require.
The Tekonsha T-One Vehicle Wiring Harness # 118528 will give you a 4-way flat lighting connector. This will be required if you will do any trailer towing, and allows you to use Auxiliary Lights # C53201 in the event a hitch mounted accessory... view full answer...
Since the Class l hitch is installed on your 2012 Nissan Juke, there are limits concerning how many bikes can be carried on your hitch. Class l hitches are only able to handle bike carriers with a maximum of 2 bikes. Unfortunately, you aren't able to carry three bikes on a hitch mounted rack, but I may have an option for you.
I recommend the Kuat Sherpa 2.0 Platform Style Bike Rack, part # SH12G. This rack tilts rearward to allow you room to access your rear cargo area. It holds two bikes... view full answer...
The Draw Tite hitch part # 24867 is a confirmed fit for your 2013 Nissan Juke AWD. The only AWD Jukes this doesn't fit are the NISMO models. Smaller vehicles like this will only have 1-1/4 inch hitches available as the 2 inch hitches are only seen on larger vehicles that would have higher towing capacities. view full answer...
For your 2015 Nissan Juke AWD, I recommend the Blue Ox Base Plate Kit - Removable Arms # BX1851. I strongly suggest using the Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube # LT37420 for this installation.
For your tow bar, I recommend the Blue Ox Alpha Tow Bar - Motor Home Mount - 6,500 lbs # BX7380. This comes with a pin and clip as well as the safety cables you will need. I recommend using the Blue Ox Base-Plate and Receiver Lock Kit - Qty 3 #... view full answer...
We have several 3-bike trunk mount bike carriers that will fit your 2013 Nissan Juke. I have included a link to all of the models that will fit your Juke.
For a good entry-level carrier I recommend the Thule Passage 3, # TH911XT. This carrier has the features you'd expect from a quality bike carrier including ant-sway cradles and padded legs to help protect the vehicle. I have linked a video review of this carrier.
For a bike carrier that will be the easiest to put on and take off of... view full answer...
I will be happy to recommend the parts you will need to use a cargo carrier on your 2013 Nissan Juke AWD. Starting with a trailer hitch I recommend # 24867. This hitch is rated for 200 pounds tongue weight meaning the combined weight of the carrier and its cargo cannot exceed 200 pounds. I have linked a video showing an example installation for you.
Curt cargo carrier # C18145 will work with this hitch but I recommend a carrier that has a rise in the shank to give you better ground clearance.... view full answer...
The Rightline Gear SUV Tent with Rainfly # RL110907 referenced in your question is confirmed to fit your 2013 Nissan Juke. The SUV tent featues an alligator clamping sleeve that will securely attach around the rear of your Juke. The heavy-duty straps and nylon buckles will then secure the tent to the vehicle body by using attachment points on the Nissan Juke exterior and inside the cargo area. I have attached the complete installation details that you can review and a couple images that... view full answer...
We do have a couple Class I trailer hitches available that are confirmed to fit your 2013 Nissan Juke FWD, as long as it is not the NISMO model. I recommend going with the Draw-Tite Class I Receiver Hitch # 24892. Unlike the Curt model that is also confirmed to fit your vehicle, Draw-Tite does not require the use of an additional stabilizing strap for non-trailer loads such as cargo carriers or bike racks.
I have attached the written installation instructions for this trailer hitch that... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I # C11088 is a confirmed fit for your 2014 Nissan Juke. We don't have any records of users needing to use different hangers on your vehicle with this hitch. This is an easy installation utilizing the existing weldnuts in your frame. I've attached a couple articles to assist with this install, and to my knowledge you won't have issue with your exhaust system on that model but I've also attached an article to help solve that issue should... view full answer...
For your 2013 Nissan Juke front wheel drive the Draw Tite hitch part # 24892 is a confirmed fit and will work well. As long as it's not an NISMO model this is the hitch you'd need. view full answer...
To begin according to the owners manual for your 2013 Nissan Juke it says "Do not tow a trailer with your vehicle." so you will want to consider that if you do intend to still tow.
With that said if you do still decide to tow a trailer I recommend installing the Curt Trailer Hitch Receiver # C11088 on your 2013 Nissan Juke AWD non-Nismo edition. If you have a Nismo edition there is currently not a receiver confirmed to fit. Curt recommends using either the 1-7/8" Drawbar # C45561 or 2"... view full answer...
The Yakima FullBack Bike Rack, part # Y02634 is constructed of steel and has a powder-coat finish.
To help keep the bike carrier in good shape it is recommended to remove it from the vehicle when not in use and keep it out of the elements. That can be tough to do so you may want to periodically apply a coat of wax to the carrier to help repel water. If the rack gets wet from rain you will want to dry it off to help keep it from rusting.
Another carrier you may want to check out and... view full answer...
To carry your bike using a hitch mounted bike rack, you first need a hitch. For the FWD model, as long as it is not a NISMO model, I would recommend the Draw-Tite Class I receiver, part # 24892. The hitch is identical to the Hidden Hitch model, but it does not include the ball mount that you will not need if you are only going to use the hitch to carry a bike rack.
For a carbon fiber bike, the best way to transport the bike without causing undue stress to the frame is to use a platform... view full answer...
The Draw Tite hitch part # 24892 is a confirmed fit for your 2013 Nissan Juke SV as it fits all models aside from NISMO.
You'd have to go with a new cargo carrier though as the hitch adapters cut the capacity of the hitch in half and this hitch has a 200 lb capacity. We have the # 63155 that is 44 lbs. This would work for you if you could lower your cargo weight about 5 pounds. view full answer...
Start with mounting a battery. Since the trailer is enclosed, it would be a good idea to mount it on the trailer frame using a battery box like # 329-HM318BKS. Next, you will need to have the right kind of connectors on the truck and trailer. I would use a 7-Way RV style if you do not already have them on the truck and trailer.
There is a 12 volt circuit on a 7-Way. You can run a wire from the 12 volt circuit on the trailer side connector to the positive battery terminal. The battery... view full answer...
The Curt Trailer Hitch Receiver # C11088 is a Class I trailer hitch, so it will not match up with the MaxxTow # MT70355.
You can instead use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD or Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise # HT5R. Both of these are rated for use with Class I trailer hitches but you will reduce the tongue weight capacity of your hitch by 50%. So your hitch that was rated for 200 lbs will drop to 100 lbs and that is the max... view full answer...
The Draw-Tite Class I hitch, part # 24867 is only compatible with AWD versions of the Juke. For the front wheel drive model, use the Draw-Tite Class I, part # 24892.
If you'll be using the hitch for towing purposes, you might be interested in the following to complete your towing set-up:
Trailer wiring harness with 4-pole trailer connector, part # 118528
Ball mount, part # 3593
1-7/8 inch trailer ball, part # 19256
2 inch trailer ball, part # 19258 view full answer...
What I recommend is to add some load stops to the roof rack crossbars so that you can support the load side to side and use straps to secure the lumber front to back and tie off to the load stops.
First you will need a roof rack for your 2014 Nissan Juke. The most cost effective roof rack that is a true custom fit is from Inno using square bars # INB117, feet # INSUT, and fit kit # INK399.
Then for load stops I recommend # TH503 because they are designed to fit Tule square bars which... view full answer...
Depending on how you are wanting to use a trailer hitch, I may have a solution for you, however there is not currently a trailer hitch available that is confirmed to fit your 2015 Nissan Juke NISMO model.
If you are looking for a way to transport your bikes, we do have a nice selection of trunk-mounted bike racks that are confirmed to fit. I recommend looking at the Hollywood Racks Over-the-Top 3 Bike Rack # HRF2-3. This bike rack is confirmed to fit your NISMO model Nissan Juke and is... view full answer...