The Curt Trailer Hitch Receiver # C11356 is a confirmed fit for your 2019 Mazda 6.
This hitch is a Class I with a 1-1/4" receiver, 2,000 lb towing capacity and 200 lb tongue weight capacity. It offers a very simple installation by bolting onto the frame, as you can see by the linked install video I added for you. view full answer...
The various colors of the Saris Bones 2- and 3-bike trunk-mount carriers are shown on the linked page and all do work with most factory spoilers, however the large spoiler on your 2003 Mazda 6 4-door sedan is not considered by Saris to be compatible. In fact Saris' FitGuide shows none of their trunk-mount racks will work with your spoiler. The same holds for Thule. And for Hollywood Racks.
However, my contact at Hollywood Racks noted that while they too do not officially have trunk-mount... view full answer...
We can get your 2020 Mazda 6 set up for towing, and the hitch will indeed fit your Signature model, which I verified with the manufacturer for you. I'll go ahead and list out all of the parts you will need for this:
- Curt Trailer Hitch Receiver # C11356
- Curt T-Connector Vehicle Wiring Harness # C56300
- Curt Drawbar # C45016
- Pin and Clip # F-4
- 1-7/8" Hitch Ball # C40001 or 2" Hitch Ball # C40018
The hitch is a simple bolt-on installation with no drilling required so it is super... view full answer...
In this case, no, a Roof Adapter, part # SR1116 would not be needed to fit a 2010 Mazda 6 with the Sport Rack Semi-Custom Roof Rack, part # SR1010.
SportRack does recommend however that you hold the hook mechanism down while tightening the bolts. view full answer...
According to Thule, the OutWay Platform-Style Bike Rack, # TH65JV, will fit the 2011 Mazda 6 sedan. It was also designed to work with most factory spoilers if your Mazda 6 has a spoiler. The platform-style bike rack certainly makes loading and unloading much easier, but it also makes for a heavy bike rack. This bike rack weighs 27.6 lbs and some customers have noted that it has dented their plastic bumpers.
For a lighter bike, I would recommend looking at the Thule OutWay Hanging Style... view full answer...
I checked with both Draw-Tite and Curt concerning the fit of their Class I hitches # 24832 and # C11359 on the 2010 Mazda 6 sedan with V6 engine and dual exhaust. The only fit exclusion noted by Curt is the Mazdaspeed edition. My contact at Draw-Tite advised that hitch # 24832 is confirmed to fit your car with V6 and dual exhaust. view full answer...
According to my contact at Magnaflow the # MF99356HM is bi-directional. This means that the unit can be installed facing either way and still perform the same. The # MF99356HM is also a confirmed fit for your 2005 Mazda 6. view full answer...
Yes, the Curt Class 1 Hitch # C11356 will work with the 1 up quik rack single that you mentioned. This hitch will work with any accessory made for a 1-1/4" receiver. It appears the quik rack will work with both the standard hitch sizes 1-1/4" and 2". view full answer...
The only option for a hitch on your 2018 Mazda 6 is a Class I hitch # C11356. This has a 1-1/4" receiver so a bike rack for a 2" hitch would not be an option. Also, a Class I hitch is going to be limited to 2 bikes, even if you use a 3-bike rack like the # S63365. Instead, you can use a trunk bike rack like the Yakima FullBack 3 Bike Rack # Y02633. This is confirmed to fit your Mazda 6 Sport and has a capacity of 35 lbs per bike or 90 lbs total when carrying 3 bikes. view full answer...
The wiring harness that will fit your 2020 Mazda 6 is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # C56300. It comes with a custom wiring harness that will plug into your existing wiring, no splicing necessary. The T-One wiring harness you attached to your question will not fit your vehicle.
I have included a product description link and a video installation of this item on a 2020 Mazda MX-5 Miata, which will be similar, below. view full answer...
Yes. The Draw-Tite Trailer Hitch, # 24832, will fit your 2009 Mazda 6 with single exhaust. I have included a link to the instructions below.
I also recommend the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM11140245. This harness plugs in line with your Mazdas wiring and provide a 4 pole connector at the rear of the vehicle and requires a direct connection to the battery in order to protect your vehicles sensitive wiring. I have included a link to... view full answer...
Yes, the SportRack semi-custom roof rack, # SR1010, is listed as a fit for your 2010 Mazda 6 sedan. It does not fit a 5-door model. I have included a link to a video review of this series of roof racks for you.
If you have a 5-door model then there is one roof rack option from Rhino-Rack using the following parts:
Euro Square Crossbars # RRVA126B-2
Feet # RRRLKVA
Custom DK Pads # DK289 view full answer...
The Saris Bones EX 2 Bike Rack # SAR83FR arms adjust to fit with factory spoilers so as long as your 2004 Mazda 6 has a factory spoiler you shouldn't have a problem. view full answer...
The Hollywood Racks Express 3 Bike Carrier, # HRE3, would not accommodate the spoiler on your 2008 Mazda 6 Grand Touring Hatchback but I do have a solution. Take a look at the Hollywood Racks Over-the-Top 3 Bike Rack, # HRF2-3, which is specifically designed for hatchbacks with spoilers. This carrier provides hatch anchors and the longer top straps that are need to secure the upper portion of the rack to your Mazda 6.
If you plan on carrying women's, children's or alternative framed bikes,... view full answer...
I looked at the Curt Trailer Hitch Receiver part # C11356 that you have installed on your 2017 Mazda 6 and compared that to the Thule Apex 2 Bike Rack part # TH9024XT. The opening of the hitch which is 1-1/4" and size of the shank which is also 1-1/4" will fit into one another however, the folding mechanism of the rack has the potential to interfere with the rear bumper due to the recessed hitch pin hole. Therefore, I do not recommend using this rack on your vehicle.
Instead, I recommend... view full answer...
MagnaFlow Stainless Steel Cat-Back Exhaust System # MF15802 fits all 3.0L V6 gas engine versions of the 2003 through 2006 Mazda 6, including the Sport Wagon. I did double-check with my tech contact at MagnaFlow to make 100% sure for you.
This 100% stainless steel cat-back exhaust kit will give your 6 a deep and throaty sound on the throttle and all of the kit's components are shown in the linked image. view full answer...
The Curt Trailer Hitch, item # C11308, will fit the 2007 Mazda 6 Sport Wagon models only.
For the 2007 Mazda 6 five door hatch back, and the 4 door sedan, you would need to use the Curt Trailer Hitch, item # C11329.
Some items you may need to complete your Class I towing setup are listed below.
Wiring, item # C59496, for the 2007 Mazda 6 Sport Wagon
Wiring, item # 118405, for the Mazda 6 4 Door Sedan and 5 Door Hatchback
Drawbar, item # 3593, for the 2007 Mazda 6 Sport Wagon
Drawbar,... view full answer...
The bars will work with your vehicle as part of an aftermarket roof rack consisting of
Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2, part # RRVA126B-2,
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4, part # RRRLKVA, and the
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof, part # DK387.
This rack has a weight limit of 165lbs. It has crossbars with a t-channel for any channel mounted... view full answer...
What I recommend is a custom roof rack for the best and safest fit without drilling. The most economical option is from Rhino Rack using the following parts:
Feet and bars # RRVA126B-2
Feet # RRRLKVA
Custom fit kit # DK387 view full answer...