Trailer Hitch Fit for 2019 Mazda 6

Question

Question:

I am looking for a hitch for my 2019 Mazda 6. What do you have that fits?

asked by: Allen H

0

Expert Reply:

The Curt Trailer Hitch Receiver # C11356 is a confirmed fit for your 2019 Mazda 6.

This hitch is a Class I with a 1-1/4" receiver, 2,000 lb towing capacity and 200 lb tongue weight capacity. It offers a very simple installation by bolting onto the frame, as you can see by the linked install video I added for you.

expert reply by: Kyle S

0

Answer 1

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Answer 2

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 3

Both the Draw Tite hitch part #24920 and the Curt part #C11406 are great hitch options for your 2017 Honda Fit. The only real difference that you'd notice between the two is how far the hitch sticks out relative to the rear bumper. The Draw Tite…

view full answer...

Answer 4

In order to satisfy Curt warranty requirements, any of their Class I or II receivers (like the C11423 you referenced) as well as a few of their Class III hitches must be used with a stabilizing strap like part #18050. This applies to any non-trailer…

view full answer...

Answer 5

One of the great things about the Curt platform bike rack part #C18085 is that it can easily attach to women's bikes like yours and not need an adapter bar. I attached a picture that shows this rack holding a cruiser style bike with a very low…

view full answer...

Answer 6

Yakima bike racks that fit the 1-1/4 inch hitch size only can fit the Class II hitch which for your 2016 Mazda 6 there is only a Class I hitch available like the Curt #C11356. So the best bike rack solution would be the Thule EasyFold XT #TH903202…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch Fit for 2019 Mazda 6

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching