We currently have two no-drill trailer hitch receivers for your 2017 Mazda 6 Grand Touring which are the Draw-Tite Sportframe Trailer Hitch Receiver part # 24908 and the Curt Trailer Hitch Receiver part # C11356. They both have a Class I rating with a 1-1/4" receiver tube opening and will be limited to a max of two bikes. I recommend going with the Draw-Tite Sportframe trailer hitch receiver as this option will not require you to purchase an additional support strap part # 18050 like the... view full answer...
The hitches available for a 2020 Mazda 6 are a Class I with a 1-1/4 inch receiver tube. For a Kuat NV 2.0 that will work in that hitch, you'd want to go with either # NV12G in Gunmetal Gray or, # NV12B for Metallic Black. You cannot go wrong with any Kuat bike rack. They make a super-high quality product and their customer service and attention to detail is outstanding.
The Curt # C11356 is a confirmed fit for your 2020 Mazda 6. You will also need the stabilizer strap # 18050 for use... view full answer...
Yes, we do have a class III hitch with a 2" receiver that will fit the wagon model of the 2017 Mazda 6 it is the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7301. This hitch is custom fit and bolts directly to your Mazda 6 with included hardware.
If you need a wiring harness to control your trailer or accessories lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118587. This custom-fit T-One connector plugs into your... view full answer...
Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # C11356 does fit the wagon model of the 2017 Mazda 6. This hitch is custom fit and bolts directly to your Mazda with included hardware. I have linked an installation video below. view full answer...
Yes, the Tekonsha T-One Vehicle Wiring Harness # 118405 referenced in your question is confirmed to fit both the 2006 Mazda 6 and the Mazdaspeed 6 Sedan. I confirmed this with my contact at Tekonsha.
This custom-fit harness will install by connecting directly to the built-in ports behind the driver and passenger side tail lights (inside the trunk). You will then need to run the hot lead up to the vehicle's battery. I have attached the complete installation instructions that you can also... view full answer...
The WeatherTech All-Weather Floor Mats # WTW71 you referenced for your 2013 Mazda 6 are semi-custom floor mats, meaning while they are not custom-made specifically for your vehicle, they are made to fit cars that are similarly designed. As such, in most cases there should be no need to trim these mats to fit in the front floorboards of your vehicle.
I have included a link to the instructions for the proper installation of this product.
If you would like floor mats that are custom made... view full answer...
The only option for a hitch on your 2018 Mazda 6 is a Class I hitch # C11356. This has a 1-1/4" receiver so a bike rack for a 2" hitch would not be an option. Also, a Class I hitch is going to be limited to 2 bikes, even if you use a 3-bike rack like the # S63365. Instead, you can use a trunk bike rack like the Yakima FullBack 3 Bike Rack # Y02633. This is confirmed to fit your Mazda 6 Sport and has a capacity of 35 lbs per bike or 90 lbs total when carrying 3 bikes. view full answer...
Yes, the SportRack semi-custom roof rack, # SR1010, is listed as a fit for your 2010 Mazda 6 sedan. It does not fit a 5-door model. I have included a link to a video review of this series of roof racks for you.
If you have a 5-door model then there is one roof rack option from Rhino-Rack using the following parts:
Euro Square Crossbars # RRVA126B-2
Feet # RRRLKVA
Custom DK Pads # DK289 view full answer...
We offer the WeatherTech Custom Auto Floor Liners in tan, # WT452141, black, # WT442141, and gray, # WT462141. These are front row sets and I have attached links to each of these floor mats for you to check out. I have also attached a link to all of the floor mat options we offer for your 2013 Mazda6.
We also offer the matching 2nd row sets, # WT452142 for tan, # WT442142 for black and # WT642142 for gray. We also offer a black trunk liner, part # WT40390. view full answer...
Yes, the Tekonsha T-One Vehicle Wiring Harness # 118587 that you referenced is confirmed to fit and will work perfectly on your 2016 Mazda 6 GT with the LED tail lights. This custom harness will plug right into existing ports behind the tail light assemblies and receive power by running a hot lead up to the battery.
This will provide you with the needed 4-Way connector for powering a trailer's basic signal lights.
I have attached the full install manual below that you can also look through. view full answer...
The Curt Trailer Hitch Receiver # C11356 is a confirmed fit for your 2019 Mazda 6.
This hitch is a Class I with a 1-1/4" receiver, 2,000 lb towing capacity and 200 lb tongue weight capacity. It offers a very simple installation by bolting onto the frame, as you can see by the linked install video I added for you. view full answer...
Yes, the Curt trailer hitch # C11308 fits the Sport Wagon model of the 2004 Mazda 6. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their... view full answer...
We can get your 2020 Mazda 6 set up for towing, and the hitch will indeed fit your Signature model, which I verified with the manufacturer for you. I'll go ahead and list out all of the parts you will need for this:
- Curt Trailer Hitch Receiver # C11356
- Curt T-Connector Vehicle Wiring Harness # C56300
- Curt Drawbar # C45016
- Pin and Clip # F-4
- 1-7/8" Hitch Ball # C40001 or 2" Hitch Ball # C40018
The hitch is a simple bolt-on installation with no drilling required so it is super... view full answer...
We do offer 1-1/4-inch Class I trailer hitches for the 2015 and 2016 model years of the Mazda 6 sedan. Both model years are part of the car's third generation and so they share hitch fits.
The available hitches are shown on the linked page. All share the same weight capacities: 200-lbs of tongue weight (TW) which is downward force on the hitch and 2000-lbs gross trailer weight (GTW).
Please note that you will want to check your Mazda owner's manual to confirm if the car is rated to tow;... view full answer...
The Tow Ready # 118587 is the Trailer wiring harness I'd recommend for your 2016 Mazda 6. The installation is mainly plug and play, the harness will plug in on the driver's and passenger side, inline between the vehicle's taillight assemblies and the wiring harness that feeds them. A wire will need to be ran under the vehicle up to the engine compartment, where the wire will connect to the positive battery terminal.
The Curt # C11356 trailer hitch does not have a ball mount or hitch ball... view full answer...
We offer the light-duty Class I hitch for your 2017 Mazda 6, the USA-made Curt # C11356. Both share the same no-drill installation with included hardware, and you can see the whole installation in the video I linked for you.
For a 4-pole wiring harness you can use # 118587, for a ball mount # C45016 and for a hitch ball part # A-82 for a 2-inch ball or # A-80 for a 1-7/8-inch.
Be sure to check your Mazda owner's manual before towing. view full answer...
The Saris Bones # SA801BL in not a fit but the Saris Bones EX 2 # SA801BL is a confirmed fit for your 2007 Mazda 6 hatchback. It also works well with your spoiler. Check out the attached video to see all of its great features. view full answer...
For your 2011 Mazda 6 with rear spoiler I recommend the Hollywood Racks Over-The-Top # HRF2-2 for two bikes or # HRF2-3 for three bikes. The Expedition has a long reach to go up and over the spoiler.
Other racks could potentially work but it really depends on the size and position of the spoiler. If you could email me a picture of the spoiler/back of the vehicle I can determine if other racks are likely to fit or not.
If you will be carrying any bikes that do not have a top frame bar... view full answer...
For a trailer hitch for your 2017 Mazda 6 the Curt Hitch # C11356 is a confirmed fit and a great choice.
The only tool you'll need to provide is a 3/4 inch wrench and you'll be set. I am not sure where you are, but typically we recommend finding a local mechanic with a solid reputation for hitch installs. I attached an install video for this down below for you to check out as well. view full answer...
I've created a photo for you showing all three hitches next to each other. The hitch in the middle 24908 by Draw-Tite is no longer available.
Both of the two remaining hitches share a very similar design, have the same weight capacities and would install in the same manner. The crossbar and receiver opening of both hitches would be visible below the rear bumper fascia of the 2015 Mazda 6.
I'd recommend the Curt # C11356. If you were planning on doing some light duty towing (after checking... view full answer...
Go To Results