We have the Yakima SightClip Fit Kit # Y59AR which is the correct fit kit for your 2018 Lexus NX 300 with flush mounted rails. The rest of the parts needed are the Jetstream Crossbars # Y00425 and Towers # Y64AR. view full answer...
I've checked with my Curt representative regarding your concern. I'm told that there's zero recorded instances of any hitch install causing the rear hatch of a 2019 Lexus NX 300 (or any other vehicle, for that matter) to open unintentionally without movement picked up by the sensors.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118652, a ball mount like # D-28 along with a # PC3 hitch pin and a trailer ball like # 19260 for a 1-7/8 or # 63845 for... view full answer...
We have a few options for your 2017 Lexus NX (300h or Turbo) but when it comes to something that's easy to install and remove I recommend going with a hitch mount bike rack. There are some trunk mount options like the Saris Bones EX # SAR83FR but you have to install it each time you go to use it and it will be a little trickier to install than a hitch mount rack.
If you don't already have a trailer hitch I recommend picking up the etrailer # e89AR because it has a matte black finish that... view full answer...
Curt has listed the Trailer Hitch # C12172 as a fit for all models of the 2020 Lexus NX 300 so it will definitely fit your F Sport model. When I was comparing some pictures of the F Sport it looks like the rear bumper has the same dimensions as the 2020 Lexus NX 300 Base with the main difference being that the lower part of the bumper has a chrome-like finish instead of the black finish.
Attached is an installation video of this trailer hitch on a '19 NX 300 along with some pictures so... view full answer...
With the Curt trailer hitch # C13337 installed on your 2018 Lexus NX 300 there may be some interference with the liftgate foot sensors, but you will still be able to use them.
You will simply need to move your foot to the left or right of the receiver portion of the hitch in order to activate the sensors. I've added a photo for you so you can see how this hitch will look when installed on your Lexus. view full answer...
As the Curt hitch # C13337 will install in the same place as the lift gate kick sensor, it will limit its usability to either side of the receiver tube. This will end up happening with pretty much all hitches installed on vehicle with this sensor. However, it does not mean it will no longer work, but you will just need to find the sweet spot where it is easy to get to again. view full answer...
The Curt Trailer Hitch Receiver # C13337 is a confirmed fit for all models of NX300T including the F-Sport for model years 2015-2017 according to my contact at Curt. They have not tested the hitch on that particular 2018 model yet but are confident it will fit. view full answer...
The Curt Trailer Hitch Receiver part # C13337 is the highest capacity trailer hitch available for a 2020 Lexus NX 300. It's rated at 3,500 lbs gross trailer weight and 525 lb tongue weight. That said, trailer hitches are tested separately of the vehicle so if that's lower it's the figure you'll need to abide by. The vehicles capacities are best found in your copy of the owner's manual. view full answer...
We haven't had any reports regarding the hands-free liftgate not working on a 2020 Lexus NX 300 once the Curt # C12172 hitch was installed. If there will be any interference, it'll be right where the receiver tube is located. If you try waving your foot in the area a few inches right of left of the receiver opening, the sensors will pick up the movement of your foot and the hatch will open for you.
Then for a wiring harness you'll need the Curt T-Connector Vehicle Wiring Harness with 4-Pole... view full answer...
We have yet to have any complaints about Curt trailer hitch # C12172 interfering with the hands-free hatch on your 2018 Lexus NX 300. I can tell you that on other vehicles that have a similar feature a trailer hitch can sometimes limit the areas in which the sensors operate so you may have to kick your foot out in a different location than you normally would. view full answer...
I was unable to confirm if the Draw-Tite # 75956 will fit your 2021 Lexus NX 300h Hybrid, unfortunately. However, I was able to confirm the Curt # C13337 will fit all of the 2021 NX 300h models. I included an install video we did on a 2020 NX 300 for you to check out as well. view full answer...
Yes, I checked with Yakima just now and they confirmed that their Yakima SkyBox NX 16 Roof Cargo Box # Y95AV does fit the OEM crossbars of your 2020 Lexus NX 300. view full answer...
To add a hitch to your 2020 Lexus NX 300, I recommend the Curt Trailer Hitch item # C13337. This hitch is custom fit for the non-hybrid NX 300 models and bolts to your Lexus with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
This hitch is made in the USA and Curt offers a lifetime warranty on their hitches so these are extremely durable and reliable. It has a glossy black powder coat finish that... view full answer...
I have a hitch bike rack recommendation for you. This rack will work if you are transporting bikes that do not have fenders. The RockyMounts WestSlope Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount, part # RKY10222, weighs 36 lbs. It secures your bike without touching the bike frame.
If your bike has fenders, the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting, part # C18085, is a fairly lightweight hitch bike rack, 46 lbs. It is also fender friendly.
The... view full answer...
The trailer hitch I strongly recommend for your 2020 Lexus NX 300 is the Curt Trailer Hitch Receiver # C13337 because it is a complete and simple bolt-on install that does not require any drilling into your vehicle's frame to install, and because it has the highest capacities of the trailer hitches that fit your vehicle. The Curt hitch will fit a 2020 Lexus NX 300 as well as the 2020 Lexus NX 300h,
This is a Class III hitch with a 2" receiver and has a robust 525 lb tongue weight capacity... view full answer...
Yes, the Curt Trailer Hitch # C12172 will fit your 2018 Lexus NX 300 with the F Sport package. If you don't already have the trailer hitch then I actually recommend going with the Curt # C13337 instead because it has a 2" hitch receiver that will be compatible with a wider variety of accessories. I have attached an installation video that you can check out.
These are the only 2 hitches available for your Lexus NX 300 so there isn't anything with the hidden crosstube like what you're referring... view full answer...
The Curt Trailer Hitch Receiver part # C13337 is a fit for a 2021 Lexus NX 300 all models. It features a bolt-on install with no cutting or drilling required. It will work great for both towing and hitch mounted bike racks. I have attached an install video below on a 2020, it will be the same as a 2021. view full answer...
We have yet to have any complaints about Curt trailer hitch # C12172 interfering with the hands-free liftgate on your 2019 Lexus NX 300. On nearly every vehicle with this feature (including yours) the solution is to simply kick your foot to either side of the hitch opening to activate the feature.
I attached an install video for this hitch on a similar 2019 Lexus NX 300 just like yours. view full answer...
Yes, if you have rear sensors they will be set off when the Thule Helium 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting - Wheel Mount Item # TH44VR is on your 2019 Lexus NX 300. You can turn your rear sensors off when the bike rack is on the vehicle. How to switch them off is listed on page 213 in your vehicles owners manual. view full answer...
Go To Results