Recommended Trailer Hitch for 2021 Lexus NX 300

Question

Question:

a Hitch for my lexus 2021, nx 300 all wheel drive

asked by: Wayne

0

Expert Reply:

The Curt Trailer Hitch Receiver part # C13337 is a fit for a 2021 Lexus NX 300 all models. It features a bolt-on install with no cutting or drilling required. It will work great for both towing and hitch mounted bike racks. I have attached an install video below on a 2020, it will be the same as a 2021.

expert reply by: Conner L

0

Answer 1

I can confirm that the Draw-Tite Trailer Hitch item #DT82QR does fit your 2022 Lexus 450h+. This hitch is custom fit and bolts directly to your Lexus with included hardware. I verified this information directly with Draw-Tite. It does not fit the…

view full answer...

Answer 2

For your 2021 Lexus NX 300 both the Curt hitch part #C13337 and the Draw Tite part #75956 are a confirmed fit for your vehicle. Either would work great but I would go with the Curt over the Draw Tite since it has higher towing capacities.

view full answer...

Answer 3

I have confirmed with Draw-Tite that #75956 is actually not a fit for your vehicle. The Curt Trailer Hitch Receiver Class II 1-1/4" #C12172 that you mentioned is a confirmed fit for your vehicle, however, I recommend going with the Curt Trailer…

view full answer...

Answer 4

The Draw Tite hitch part #DT82QR does fit your 2021 Toyota RAV4 Prime PHEV but it is the wrong size as it is a 2 inch hitch. Instead you'd want the Curt hitch part #C66KR which also fits your vehicle but is the correct 1-1/4 inch hitch size.

view full answer...

Answer 5

I added a cut out showing a number of dimensions, including the distance from the hitch pin hole to the back of the shank of the Kuat Sherpa 2.0 2-Bike Rack - 2" Hitches #SH22G. As you can see from the cut out, the distance from the hitch pin…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Recommended Trailer Hitch for 2021 Lexus NX 300

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching