The easiest way to confirm exactly what factory equipment you have on your 2017 Kia Sedona LX is to ask your local dealership to simply run the car's VIN (vehicle identification number). This tells the dealership exactly what the factory installed on the car; if there were any dealer-installed items the dealer will know this too.
The presence of a towing package does not affect the hitch fit on your Sedona. The hitch I suggest is the Draw-Tite 2-inch # 75894 which bolts on using included... view full answer...
I would be happy to help you set up your 2021 Kia Sedona for towing. Lets start with a hitch. I recommend the Curt Trailer Hitch Receiver item # C13115. This is a class III 2" custom fit hitch that will attach to your vehicle with no drilling into the frame. It has a maximum gross trailer weight of 4,000 lbs and a maximum tongue weight of 400 lbs. I have attached a picture so you can see what the hitch looks like installed on a Kia Sedona.
For your trailer light control functions I recommend... view full answer...
I have a way better hitch for you but the frame on your 2012 Kia Sedona is not wide enough for the Curt Trailer Hitch Receiver item # C13900. Instead you will want the Draw-Tite Max-Frame Trailer Hitch item # 75421. This hitch is custom fit and bolts to your Sedona with included hardware. It does not require any drilling.
I recommended this hitch because it has a 2" receiver which will give you the widest options for accessories but also because this hitch has a 3,500 lbs capacity. You... view full answer...
Our fitguide doesn't show any Thule or Yakima racks confirmed to fit your 2015 Kia Sedona. I checked with both manufacturers and they reflect the same. The only 3-bike trunk mount racks we've confirmed to fit the Sedona are the Saris Guardian, part # SAR43FR, if you use Hatch Huggers, part # SA3035, and the Hollywood Racks Over-the-Top, part # HRF2-3.
On the other hand, we do carry two Yakima 3-bike racks that fit your 2012 Nissan Leaf; the FullBack # Y02633, and the HangOut # Y02638.... view full answer...
The Reese Strait-Line Weight Distribution Hitch, # RP66073, has a tongue weight capacity of between 400 lbs. and 800 lbs. so it is at the upper end of the weight that you will be carrying. The drawback to this is that it may produce a slightly stiffer ride than a system that is rated for something like 200 lbs. to 600 lbs.
For your 2006 Kia Sedona towing a 3,000 lbs. camper I would recommend the Reese Strait-Line Weight Distribution Hitch, # RP66072, which has a 200 lbs. to 600 lbs. tongue... view full answer...
The Kuat Cable Lock part # PTSCLK12 that you referenced does not work with the newer V2 style of the Transfer. it only fits the previous generation. view full answer...
The Timbren Rear Suspension Enhancement System # TDVR05096 could be just what you need for your 2010 Sedona.
These are designed to help reduce road shock and increase stability when the vehicle is carrying heavier loads. They are not designed to affect the empty ride.
You may want to have the vehicle checked out to make sure everything is in good working order because the Timbren system is designed to work with a properly working suspension system.
I have attached a link to an installation... view full answer...
We have the Thule Replacement Anti-Rattle Knob part # 753-0073 which fits the M8 1.25 thread size/pitch. Then to install a lock core you'd need the part # 1500004217 with the change key # 853-1251. view full answer...
So long as you have a 2-wheel drive model of 2019 Kia Sedona, there are two coil SumoSprings that fit, one for the front springs and one for the rear springs:
- Front: Coil SumoSprings # CSS-1125F
- Rear: Coil SumoSprings # CSS-1168R view full answer...
The 2008 Kia Sedona has a 3.8 liter V6 with 250 hp, and while that's not a beast it's certainly capable of pulling a boat trailer out of the water with your Curt # C13345 Class III hitch, barring an abnormally steep gradient. The reason you've probably heard a number of different things is because there are many factors that can lead to problems - or lack thereof - when towing. How the vehicle was maintained, the amount of cargo it has inside and the quality of the tires will make a difference.... view full answer...
Yes, the Curt Class III trailer hitch, # C13115, has a 2 inch receiver and the Thule Apex Swing, # TH9027XT, is made for hitches with 2 inch receivers.
If you plan on carrying bikes with alternative frames, such as kids bikes or women's bikes, I recommend using an adapter bar, like part # TH982XT. The adapter bar attaches between the seat post and the handlebar stem. This allows the bike to be positioned more level in the carrier while providing additional ground clearance. I have attached... view full answer...
There are a few trailer hitch options for the 2003 Kia Sedona, the Curt Trailer Hitch Receiver part # C13340 and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75131 which both have the larger receiver tube opening. I recommend the Curt Trailer Hitch Receiver because there is no drilling required as there would be for the Draw-Tite Max-Frame Trailer Hitch Receiver. Unfortunately, there are not any more cost effective options available.
Please note, trailer hitches are specific... view full answer...
Doing a parts search I do see the same rear coil springs were used on the 2015-2018 Kia Sedona. Unless there is something added inside your coil springs that would prevent the Firestone Coil-Rite Air Helper Springs # F4138 I do not see why they wouldn't fit. I have also linked an installation video near the bottom of the page you can reference to determine if there are any other differences with your rear suspension. Firestone would not tell me the dimensions of the bag itself.
If there... view full answer...
On the 2009 Kia Sedona, the long wheelbase has the third row seating that will fold into the floor. The short wheelbase does not have that feature.
The Curt Trailer Hitch, # C13345, is for the long wheelbase Kia Sedona. It is a bolt-on application with no drilling required.
If you have the short wheelbase Kia Sedona then you will use the Draw-Tite Trailer Hitch, # 75551.
The installation on this hitch does require removal of the tie-down hook and there is a access hole on the passengers... view full answer...
I would be happy to help you. The Draw-Tite hitch item # 75894 sits 11" off of the ground when mounted on your 2018 Kia Sedona. I have linked a diagram I made. You will want the Curt Ball Mount item # C45446. This ball mount has a 5" Rise and fits a 2" receiver. You will also need the Curt 2" Hitch Ball item # A-90. This will give you a 17" height to match your trailers coupler. view full answer...
I went out to the warehouse and pulled the T-Connector Wiring Harness, # C55309, for the 2003 Kia Sedona and produced a short video showing the connectors for you, see link. The passenger side connector is not larger than the drives side connector and should be exactly the same. You will need to go directly to the back of each taillight housing to locate the correct connectors on both sides of the vehicle. view full answer...
Yes, the Saris Guardian 3 Bike Rack # SAR43FR will work fine with your 2017 Kia Sedona with a spoiler. This bike rack has a carrying capacity of 3 bikes weighing 35-lbs each, is made in the USA, and the carrier itself only weighs 8-lbs.
Attached is a review video for you to check out as well. view full answer...
Possibly, but I am unable to confirm a fitment from a photo so you really do have to measure to see if you can use the Swagman RV 4-Bike RV Bumper Mount Rack # S80600.
The # S80600 will fit your bumper so long as it measures between 4 and 4-1/2 inches wide, and you have 1-1/2 inches between the back of the bumper and the rear wall of the trailer, as well as 1-1/2 inches from the top of the bumper to any part of the trailer. view full answer...
The trailer hitch part # 75894 is confirmed to fit your 2020 KIA Sedona. We have not had the chance to install the hitch onto a 2020 Sedona or a 2019 but the model years but we have sold a lot of these hitches to customers with a 2019 Sedona with no returns and also have a review from a customer who attached a picture of their hitch installed on their 2019 Sedona.
I reached out to Draw-Tite and they confirmed that the hitch does fit the 2019 Sedona but like us, they have not had a chance... view full answer...
The Mighty Mount 39H Accessory Adapter for Yakima CoreBar and JetStream Crossbars # Y03539 will work with your Rola Sport Roof Rack 59786 because the crossbars are the same dimensions. This will allow you to mount your Yakima Mako Saddles. view full answer...
Go To Results