The Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Driver's Side - 118 Sq Ft # RR33100 is only meant to be installed by using the T-slot top channel on the Rhino-Rack Pioneer Platform Rack or any other crossbars with T-slot top channel. There is not any adapter/spacer that will add height to this system. If you can tell me which cube lights you are using or send me a photo of your setup then I can find a solution for you in which the lights would not interfere with the Rhino-Rack... view full answer...
I confirmed with Roadmaster that you will be able to replace the arms of your Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4 with the arms of the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521448-5.
You'll need to fill out the form located on the # RM-ARMS page listed as "Installation Details" and send it into Roadmaster. The arms you're wanting to order are the C002383.
As for the tow bar I recommend the Roadmaster Falcon All Terrain, Non-Binding... view full answer...
Definitely, you'll need the follow items to safely flat tow your 2023 Jeep Wrangler:
Baseplate: Blue Ox Base Plate Kit # BX1139. This baseplate is designed to fit a standard factory bumper. If you have and aftermarket bumper then let me know and I can look through some other options.
Tow Bar Wiring Kit: I see you were looking at the # BLU79FR, you could go with this, but I personally avoid plug-in options as they tend to have the most issues and there isn't really anything you can do... view full answer...
To get a 5-way on your 2019 Jeep Wrangler, you will install a 4-way and then adapt it into a 5-way.
The T-One Vehicle Wiring Harness # 118786 will provide you with the needed 4-way. This 4-way is the "direct connect" style you are wanting. In the sense that it plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You would then use the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 in order to adapt the 4-way into... view full answer...
I just checked with Roadmaster for you and can confirm that your 2021 Jeep Wrangler Unlimited is compatible and will work with the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5.
These base plates will also work with the tow bar you mentioned, which is a great choice, the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522.
Along with the base plates and tow bar, there are some other parts you will need for your '21 Wrangler if you don't have them, which I'll list for... view full answer...
You can most certainly use the Electric Trailer Brake Kit # AKEBRK-2 with your 2,200 lb axle. Even if you are at the 2,200 lb weight capacity of your axle you will be just fine. You will also need to swap out your idler hubs for hub and drum assemblies. If you have an EZ Lube spindle use part # AKHD-545-2-EZ-2K but if you would like the standard grease cap use part # AKHD-545-2-2K instead.
Some other things you will need are a brake mounting flange, wiring, a breakaway kit, and a brake... view full answer...
Yes, the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR will work on your 2021 Jeep Wrangler Unlimited Rubicon 4xe.
You will need the Tekonsha Custom Wiring Adapter # 3073-P to connect to the factory connection on your Jeep. Then the Redarc Tow-Pro Wiring Adapter # 331-TPH-017 will adapt the Tekonsha adapter to fit the connection on the Redarc Tow-Pro Elite.
The trailer brakes will only activate when the brake pedal is pressed unless you manually override the brakes. If you... view full answer...
Yes, the Air Lift 1000 Air Helper Springs for Coil Springs # AL60829 are the correct air bags for your 2021 Jeep Wrangler Rubicon 392. These air bags are confirmed to fit all models of your 2021 Jeep by simply using the included spacers in the correct position. I have linked the installation instructions below so you can see how the air bags will mount on your Rubicon.
I recommend the Air Lift WirelessAIR Compressor System # AL58WQ for controlling the air pressure in the air bags. This... view full answer...
I have a great solution for you. Unfortunately, the Hollywood Racks RV Rider # HLY64FR does not have enough shank length to clear the rear spare tire of your 2019 Jeep Wrangler Unlimited. This is because the measurement from the shank length of the RV Rider is only 7-1/2 inches from the center of the pinhole to the closest part of the rack. However, you can use a hitch adapter that will provide you with more length such as the Brophy # HE06 to extend your setup past your 9-inch clearance... view full answer...
The Blue Ox Avail Tow Bar - Motorhome Mount - 10,000 lbs # BX7420 is just one part of the system you need to flat tow your 2020 Jeep Wrangler Unlimited. You will also need the baseplates, the wiring harness, the supplemental braking system and a high-low adapter. I recommend the following items to go with that tow bar for your Jeep:
-Blue Ox Base Plate Kit - Removable Arms # BX1139
-Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7
-Demco... view full answer...
I don't show the Call of Duty Edition Bumper for a 2012 Jeep Wrangler Unlimited as having the required d-ring mounts to use the Adapter for Jeep D-Ring Bumper Mounts part # RM-035. Therefore, you'll need to use the Roadmaster Direct-Connect Base Plate Kit part # 1439-3 which is a confirmed fit for models with the Call of Duty Edition Bumper. view full answer...
The Curt Trailer Hitch # C13392 that fits your 2017 Jeep Wrangler Unlimited with a standard bumper is absolutely compatible with a weight distribution system and when used with a WDS has a 4,000 lb capacity and 400 lb tongue weight capacity.
We do not have any information about Mopar hitches and their compatibility with weight distribution but the Curt Trailer Hitch # 9883544 is guaranteed to work. In regards to EAZ Lift we do not carry them but the most ideal weight distribution system... view full answer...
I would be happy to help you find a base kit for your 2021 Jeep Wrangler Unlimited. I recommend the Demco Tabless Base Plate Kit - Removable Arms item # DM9519339. This custom-fit base plate kit lets you hook up your tow bar to your Jeep Wrangler Unlimited. The Tabless design provides a clean, unobtrusive look for your Jeep even when not hooked up.The electrical bracket lets you easily mount a round electrical connector plug. The covers keep dirt and debris out of the base plate receivers... view full answer...
I reviewed the online edition of the owner's manual for the 2017 Jeep Wrangler Unlimited and on pages 423/4 it notes that large tires like your 255/75/17 mud/snow tires cannot use tire chains. The reason is inadequate clearance within the wheel wells and around components like brake lines.
Special low-profile S-Class chains are made for such circumstances but according to Jeep these can be used only on smaller tire sizes P225/75R16 or P235/65R17 and then only on the rear axle.
I recommend... view full answer...
To get replacement arms for the Roadmaster Base Plates # RM-521448-4 on your 2013 Jeep Wrangler Unlimited you need the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS and click on the "Installation Details" link on te product page. These base plates will be compatible with your Falcon All-Terrain Tow Bar # RM-522.
There are a number of parts you're going to need in order to flat tow your '13 Wrangler, including safety chains # RM-643.
For wiring kit that will allow your Wrangler's... view full answer...
Yep, since you just want to connect your trailer's 7-way and don't want brakes, just the lights, all you need to do is use the adapter you mentioned:
- Adapter 4 Pole to 7 Pole and 4 Pole w/ Test Lamps # C57674
You will just plug your Jeep's 4-way into the # C57674 and you can tie off the remaining wires as they won't be used since you only want the lighting functions. This comes with a mounting bracket as well so you won't need to purchase anything else. view full answer...
We can help you out with all the parts you'll need to flat tow your 2021 Jeep Wrangler Unlimited, and you are most of the way there. You will need different base plates though as the part number you mentioned is for earlier model Jeeps. I'll list out each of the parts needed to flat tow your '21 Wrangler Unlimited:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521453-5
- Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676
- Wiring Kit: Roadmaster... view full answer...
There currently are no adapters available to connect the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521453-5 to your Demco Dominator Tow Bar # DM9511008 so instead I recommend going with the RM-521453-4 which is the same bracket but with different style arms which will allow you to use the Roadmaster Tow Bar Adapter # RM-032 and connect to the Dominator tow bar.
If you don't want to have to use an adapter you can use a Demco branded base plate like the # DM9519336... view full answer...
Go To Results