Since you have a 1 inch D-ring on your 2005 Jeep Wrangler and a Blue Ox tow bar the adapter you'd need to connect to it is the part # BX88358 as your best option. view full answer...
Sounds like you just need the replacement fabric for your 2003 Jeep Wrangler with full doors and windows. For that the part # RA99335 comes with everything you would need and would fit the factory bow system of your Jeep. view full answer...
For your 2005 Jeep Wrangler TJ the Aries Automotive Seat Defender Bucket Seat and Headrest Protector - Universal Fit - Camo # AA3142C is confirmed as a fit for both of the front buckets, you will need two of these. And then for the rear we have the # AA3146C which matches and is designed for the bench seats like what you have. Both of these are universal fit covers but have been test fit on your vehicle and found to fit well. view full answer...
I do have a great option for you, however the Timbren Front or Rear Suspension Enhancement System # TJFTJ that you referenced will not work on your lifted 2000 Jeep Wrangler TJ. I spoke with my contact at Timbren and he said that if you have a true suspension lift where the space increased between the factory bump stops and axle, this particular kit won't work because of the coil spring suspension on the TJ model. The spacers that they have available that would otherwise be needed to fill... view full answer...
A front-axle suspension enhancement kit for your 1998 Jeep TJ is an excellent idea if you will be using a snowplow/winch set-up. We offer a range of suitable products whose fits will depend on whether your TJ is 4WD or 2WD. We offer several options if 4WD and one if 2WD.
If you have a 4-wheel-drive TJ a great option that is cost-effective and simple to install is the Super Springs # CSS-1168F. This kit consists of two microcellular polyurethane foam springs that insert between the turns... view full answer...
I recommend adding Air Lift Lock-N-Lift # AL52440 spacer kit to the AirLift 1000 Air Helper Springs for Coil Springs # AL60811 as it lets you add air springs to your lifted vehicle. It will work with vehicles with up to a 4 inch lift.
The diameter of the spring 5-3/8 inches and 4 1/2 inches tall.
I added an instruction link for you as well. view full answer...
The TireMinder TPMS for Dual Axle Trailers, # TPMS-TRAILER do not use this for tires with an operating pressure above 70 psi. I recommend instead, the TST TPMS for RVs, # TST-507-RV-4-C as this is for pressure ranges from 0 psi to 196 psi. This has a full-color, wide-screen monitor that provides early warning detection with visual and audible alerts, detects blowouts, significant pressure changes, and tire temperatures exceeding 158 degrees. It will refresh automatically with new tire... view full answer...
This Curt tow bar part # C19745 is designed to be used with the included brackets that would attach directly to a vehicle bumper/frame. It's not a very sophisticated or easy to use setup as most vehicles don't have steel bumpers rated for flat towing.
For flat towing a 1998 Jeep TF I'd rather recommend a base plate kit like the # RM-521424-5 and a tow bar like the part # RM-501. view full answer...
For your 2000 Jeep Wrangler (TJ) I recommend Timbren front helper springs # TJFTJ. These springs will provide better support than the Coil SumoSprings. Air bags could be used, the durability is not an issue, but for this application I find air bags to be unnecessary. They require maintenance, you have to add and remove the air compared to the Timbren springs that require nothing after the initial installation.
Since the load of the plow is only at the front you would not need anything... view full answer...
The Bestop Upper Door Sliders for Jeep Wrangler and Wrangler Unlimited 1997-2006 # B5178735 in black diamond (or # B5178715 in black denim) are very well made and will reduce the noise and draft you are experiencing. You of course will still have a Jeep with its designed outdoors feel and sound, but the Bestop company makes all the OEM soft tops and doors so you will have factory quality replacement sliders. view full answer...
The Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs, Item # TH859XT is compatible with most roof racks as long as the cross bars are between 20 inches and 37 inches apart when measured center to center .
To get the most cost efficient system that will support this rack and give you the spacing necessary, I recommend the Rhino Rack Roof Rack consisting of:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 59" Long - Qty 2 # RRVA150S-2
Rhino-Rack Quick Mount Legs... view full answer...
The base plates you can install on your Jeep depend on the bumper style you have. If you have a U-channel bumper the base plates that will work are part # 1417-1. If you have an off-road bumper with the 1-inch D-Ring bumper mounts then the base plates for your Jeep are part # RM-035-1, and if you have the off-road bumper with 3/4-inch D-ring bumper mounts the base plates you can use are part # RM-035. If you have a double tube bumper I recommend the part # RM-521424-5 EZ5 base plates. For... view full answer...
The hitch I recommend for your 1998 Jeep Wrangler TJ is the Curt # 13408. It is a Class III, 2" hitch with a towing capacity of 4,000 lbs and a tongue weight capacity of 400 lbs. The customers who have used this hitch rave about it, with over 200 reviews it has an aggregate of nearly 5 stars. To add a 4-flat connector you would want # 118409 and I also recommend checking out Ball Mount Kit # 989900, which may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4”... view full answer...
We do have post style kayak carriers that can be used with the Yakima round crossbars like the BigStack part # Y04041 but the Rhino Rack Nautic part # RRS520 was not designed for this size bar so it would not work. view full answer...
Yes, Blue Ox does make a D-ring adapter for the 2005 Jeep Wrangler with the part number # BX88357 for if the D-ring is 1 inch. If instead the D-ring was 3/4 inch you'd have to go with a Roadmaster adapter part # RM-035. view full answer...
I recommend the Roadmaster InvisiBrake Supplemental Braking System, # RM-8700. You will also need the Roadmaster Flexo-coil Wiring Kit, # RM-15267. I also recommend you use safety cables such as the Roadmaster 64" Single Hook, Straight Safety Cables, # RM-645. view full answer...
According to my contacts at Air Lift, their vehicle suspension kit # AL80702 is confirmed as a fit on your 1999 Jeep TJ, that has a 3 inch lift. This kit will install inside of your current coil suspension on the front axle. It provides additional support when using your snow plow, for both leveling and the handling of your vehicle.
I have checked with my contacts at Timbren, and to determine the correct fit for your 3 inch lifted Jeep, you will have to take some measurements. The measurement... view full answer...
Yes, the Demco SBS Stay-IN-Play DUO Supplemental Braking System part # DM86VR will work on a 2000 Jeep Wrangler with hydro-boost brakes. The vacuum connections however will be different than those in the instructions, instead you'll need to simply leave the factory installed check valve open and not connect it to anything. This will just send more air pressure to the air cylinder. view full answer...
There's no reason you couldn't install the Buyers Products RV Universal Receiver Hitch # 3371804060 above the rear bumper instead of down below it. view full answer...