For your 2018 Jeep Wrangler JK and Blue Ox Aventa II tow bar you'll need the Blue Ox Base Plate Kit # BX1134. To go along with your tow bar I recommend the RoadMaster 68" Safety Cables # RM-643. The coiled design of these cables will help prevent them from dragging on the ground and being damaged.
If you don't have the rest of your flat tow setup then I have the following recommendations:
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode... view full answer...
While the roof rack systems will work similarly, the Rhino-Rack SG Roof Rack for Rain Gutters # RRSG59 that you were looking at are only for the 4-door models and not your 2-door 2018 Jeep Wrangler JK.
But don't worry, because we do carry the 2-door version of that rack.
- Rhino-Rack SG Roof Rack for Rain Gutters # RRSG60
The difference between the two different racks is going to be the crossbar length and the crossbar spread. The 4-door version # RRSG59 uses two different length crossbars... view full answer...
For your 2018 Jeep JK Wrangler the Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Item # RM-521448-5 and the Roadmaster Sterling All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 8K Item # RM-576 do work together however, the crossbar, cross bar brackets and safety cables will not be used. The tow bar connects directly to the removable arms on the base plate. You also need the Roadmaster 64" Single Hook, Straight Safety Cables - 8,000 lbs Item # RM-645 to replace... view full answer...
We had the chance to install the Hopkins tow bar wiring kit part # HM56200 on a 2018 Jeep Wrangler JK like yours (see attached install video) so we do know this kit fits your vehicle. If yours had it's converter box short out and fail then you'd need to replace the entire kit. At this time we don't have a way to replace just the box. view full answer...
For your 2018 Jeep Wrangler Willy's model the important factor is going to be what type of bumper you have. If your Wrangler is a JK with a standard factory bumper then you'll need the Roadmaster Direct-Connect Base Plate Kit # RM-521448-5.
If you have a JL with a standard plastic or metal factory bumper then you'll want the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5. view full answer...
The Swagman E-Spec Electric Bike Rack part # S94FR is rated for use on both motorhomes and flat-towed vehicles so there will be no issues there. It will allow you to carry both an e-bike and standard bike as well. The heavier bike would need to be carried in the cradle closest to the shank.
The Curt item # C13392 you referenced has plenty of capacity to support this bike rack. Yes, the lower receiver would want to be used for the tow bar and the upper receiver for the bike rack. view full answer...
The Roadmaster Falcon 2 Tow Bar for Blue Ox Base Plates # RM-525 is compatible with all vehicle-specific base plates from Blue Ox, which includes the # BX1134 for your 2018 Jeep Wrangler. view full answer...
The physical dimensions of the bumper will be different for each make/model therefore the shape of the brackets for the base plates designed for said bumper will be different. We offer base plates for a number of different Jeep bumpers which you can see in the list below. If yours is not listed and we may still have an option if it has d-rings, the Adapter for Jeep D-Ring Bumper Mounts part # RM-035 or part # RM-035-1. view full answer...
Yes, if you plan on installing the Aries ActionTrac Motorized Running Boards # AA73DQ and removing the doors at all from your 2018 Jeep JK Wrangler then you need to install the Door Delete Kit # AA3020000.
You'll connect the tee wiring that goes to these push buttons when you remove the doors, and the disconnect the tees for the push buttons when you reinstall the doors so everything functions normally when you open and close the doors. view full answer...
We do have an adapter for your Roadmaster Nighthawk Tow Bar # RM-676 to attach to your Demco tabless base plates, and what you need is the following part number:
- Roadmaster Blackhawk All-Terrain, Sterling, or Nighthawk Tow Bar to Demco Base Plate Adapter # RM-034-5 view full answer...
You are correct that there are some bike racks designed for flat towing and some that are not. For your 2018 Jeep JK Wrangler, I recommend Lets Go Aero V-Lectric Bike Rack for 2 Electric Bikes - 2" Hitches - Wheel Mount Item # LGA77FR. This bike rack is designed for flat towed vehicles, accommodates E-bikes and has a weigh capacity of up to 75lbs per bike. The lower mount for the bikes can be secured in different locations on the double tubes to allow you to fit the rack and bikes to the... view full answer...
Thule has changed the way their roof racks mount to vehicles in recent years, which means that older square bars are no longer able to mount with the current systems that Thule has available; this means that in order to mount a roof rack to your 2018 Jeep JK Wrangler hard top you will need to get new crossbars.
All of the current Thule bars will mount to your Jeep with the same feet, so you can choose to continue using square bars or upgrade to the quieter aero-shaped bars. The parts... view full answer...
Yes, the older Demco Commander tow bar 951010 (replaced by Commander II part # DM9511012) can be used with the Roadmaster Direct-Connect Base Plate Kit - Removable Arms part # RM-521448-5 with the Demco adapter part # DM9523032. If you have the Roadmaster Crossbar-Style Base Plate Kit part # RM-521448-4 you will need the adapter part # DM9523001.
If you do not already have the Roadmaster base plate on the Jeep, you can use a Demco base plate without an adapter with the Commander tow bar.... view full answer...
While there is an option for front fender flares that you can add side marker lights to on your 2018 Jeep JK Wrangler, the Rampage Trail Fender Flares for Jeep - Steel - Front and Rear # RA867981 have a flat lip, so they can't have side marker lights attached to the sides as there isn't a place to mount the lights on the side of the flares.
For front and rear fender flares and marker lights that fit your Jeep you would need the following:
- Aries Front Fender Flares for Jeep # AA1500201
-... view full answer...
To use the Roadmaster StowMaster Tow Bar # RM-501 to flat tow your 2018 Jeep JK Wrangler you'll need to use a Roadmaster crossbar-style base plate like the # RM-521448-4 to connect to. This base plate is only compatible with a standard factory bumper so if you have a different style bumper let me know and I can find the compatible fit.
The RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000lbs # RM-643 are a great choice for safety cables, and are my most recommended choice for vehicle's... view full answer...
We do have a Hopkins wiring kit that will work with your 2018 Jeep Wrangler, but the wiring kit you mentioned is not available, like you said. What we know will work for your '18 Wrangler is the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200.
We know this will work because of numerous customer reviews stating they have installed it, and we have also installed it on a 2018 Wrangler. I have added a link below to a video of that install for you to check out. view full answer...
While the Curt Clamp-On 3 Bike Rack # C18013 only requires 1-1/2" or space on the shank for it to fit (so it will fit your Excali-Bar III # DM9511013) I am not sure about your bikes being able to fit in-between your motorhome and Jeep.
The first cradle of the Curt bike rack only sits a few inches in front of the vertical arms of the rack so I would try mocking up your flat towing setup to see if you will have proper turning clearance with 3 bikes (if that's how many you plan on carrying).
Another... view full answer...
The Aries ActionTrac Motorized Running Boards part # AA73DQ do for sure fit your 2018 Jeep Wrangler 2 door. This has the same brackets as the 4 door models but has shorter running boards to match the dimensions of the 2 door models.
The version that fits the 4 door model is the part # AA3036570. view full answer...
There are several manufacturers who have flat tow rated aftermarket bumpers for your 2018 Jeep Wrangler JK Unlimited. Personally I recommend looking at options from either AEV or Quadratec. Be sure the model bumper you select is flat tow rated as not all bumpers are. You will then need either the 3/4" Adapter # RM-035 or 1" Adapter # RM-035-1 depending on the width of the shackle mount. I do recommend using the Locking Pins # IR44FR to secure the Roadmaster Nighthawk All Terrain, Non-Binding... view full answer...
To connect to a Blue Ox Aventa tow bar you would need to use a Blue Ox baseplate like the # BX1126, as long as your 2018 Jeep Wrangler has a factory bumper. If you haven't gotten the rest of your flat towing components then I have the following recommendations for you:
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit will have everything you need to display your motorhome's traffic signals through the tail lights on your Wrangler.
Braking... view full answer...