To begin according to the owners manual for your 2018 Hyundai Accent it recommends against using your vehicle for trailer towing. That being said here are the parts if you decide that you are going to use it for towing your camper.
For your Accent the Curt Trailer Hitch Receiver # C11548 has a class I rating that is capable of 200lbs tongue weight and a towing capacity of 2,000lbs.
You will need a wiring harness for the lights on your camper. The Curt Powered Tail Light Converter # C59236... view full answer...
To install the Thule SquareBars on your 2010 Hyundai Santa Fe with the flush mounted rails you will need the Thule Fit Kit for Podium Style Foot Pack, part # THKIT3024, and the Thule Rapid Podium Roof Mounted Foot Pack, part # TH460R.
On the 2010 Hyundai Santa Fe it is recommended to use the Thule 43 Inch Long SquareBars, part # TH712100.
Anytime you are going to haul cargo on the roof of your 2010 Hyundai Santa Fe you will want to check the owners manual or with the Hyundai dealer for... view full answer...
First you will need an etrailer Trailer Hitch Receiver # e95ZR for your 2020 Hyundai Palisade. This will accept your ball mount or weight distribution hitch for towing the trailer.
Then you will need a Curt T-Connector Vehicle Wiring Harness # CU94FR. This will give you a 4-way flat connector that operates the lights on your trailer. It will connect to the Universal Installation Kit for Trailer Brake Controller # ETBC7 allowing you to install the Redarc Tow-Pro Liberty Brake Controller... view full answer...
We have exactly what you're looking for with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # CU94FR. This plugs into the OEM connector on your 2020 Hyundai Santa Fe and gives you a 4-Way flat connector that then supplies your trailer with the different light functions. I have attached a video of us installing this on a 2019 Santa Fe that you can reference for the install.
If you don't already have a trailer hitch then I recommend using the etrailer.com Trailer Hitch... view full answer...
I have a solution for you but the CM-SP2 spacers are not available for individual sale. However, there is a complete set of replacement hardware available for the Curt Trailer Hitch item # C11254. This complete set will allow you to install your hitch on your 2016 Hyundai Veloster and you won't have to piece it out or worry about using the incorrect/unapproved hardware and voiding your warranty. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. Just go to the right... view full answer...
The hitches we offer, the Curt # C34ER and the etrailer brand # e28AR are identical except for their finish. The Curt has a glossy finish, the etrailer has a matte finish. I prefer the etrailer brand for a couple of reasons: Both hitches will fit the Calligraphy trim.
• The etrailer brand is usually less expensive by a few dollars
• The matte finish tends to disappear a little better under the vehicle, which makes the hitch a bit less visible.
If you plan on towing a trailer you will... view full answer...
You will be able to install the Curt Venturer NEXT Trailer Brake Controller # C74VV on your 2023 Hyundai Santa Cruz with the Pigtail # C77BR. As you only have a 4-way flat you will need the Curt T-Connector Vehicle Wiring Harness # C68JR to install a 7-way on the rear of your Santa Cruz. A Mounting Bracket # C67UR is needed to secure the 7-way since there is not a bumper cutout like you find on most trucks. view full answer...
If you already have a 4-Way Flat # C59236 you will first need the 7-Way Upgrade Kit # ETBC7. Then you will be able to wire in the Redarc Tow-Pro Liberty Brake Controller # RED52VR.
If you do not have any trailer wiring the Tekonsha OEM Replacement Vehicle Wiring Harness # TK44ZR will give you the wiring portion you need. Then you will be able to connect the Redarc Tow-Pro Liberty Brake Controller # RED24FR with the Adapter # 331-TPH-017. view full answer...
We do have the Thule WingBar Crossbars in aluminum at 50 inches part # TH711300. If you need mounting hardware or any accessories feel free to reach out to me with your year make and model and I can further assist you in finding the right parts for your application. view full answer...
Yes, The AirBedz XUV Air Mattress w/ Built-In Battery # 341031 is confirmed to fit well in your 2010 Hyundai Santa Fe.
This mattress will fill the entire cargo area and in between your wheel wells. The built-in pump inflates and deflates your mattress in minutes. The mattress is made out of a durable polyester and is resistant to punctures and leaks along seams. The mattress can hold up to 600 pounds.
I attached a review video link below. view full answer...
After installing the Curt Trailer Hitch Receiver # C98DR onto your 2023 Hyundai Ioniq 5 you will have to trim the panel to be able to reattach it to your car. You will not have to modify the bumper. During the installation process the underbody panel(s) and/or fascia must be temporarily loosened or removed. I will attach a picture below of the minor modification. I like this trailer hitch because after the installation is finished the hitch has a hidden design with only the 2 inch receiver... view full answer...
Though all our trailer hitches that are confirmed to fit your 2021 Hyundai Palisade are very similar, I recommend the etrailer Trailer Hitch Receiver # e95ZR. I like the etrailer hitch over the others because the etrailer hitch has a matte black powder coating that will hide scratches and scuffs better that you would receive from flying rocks and road debris while towing. The other hitches have a gloss black paint which shows the scuffs and scratches more frequently.
Since you're towing... view full answer...
Since your 2009 Hyundai Sonata features a manual transmission, it can be flat towed. According to the online version of the owner's manual, when towing with all four wheels on the ground, the ignition key should be placed in the "ACC" position and the trans-axle in "N" (Neutral).
Now, let's go over the 5 main components that are needed to safely flat tow your vehicle:
Tow bar - link between your RV and your Sonata
Base plate kit - custom made to install on the frond end of your Sonata... view full answer...
Along with the Curt T-Connector Wiring Harness for Factory Tow Package # C68JR, you'll need a brake controller.
The Curt Echo Wireless Trailer Brake Controller # C51180 will work great, and will simply plug into your 7-way connector at the rear of your vehicle.
This trailer brake is controlled via a user friendly, easy to use, app, and will allow you to monitor, and control all of your trailer braking activity. view full answer...
I know exactly what you need and for the 2022 Hyundai Palisade, Curt has a wiring harness that does not require you to run a wire up to your battery. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # CU94FR. The T-Connector plugs directly into your existing wiring, requiring no cutting, splicing, or tapping. I have linked a couple videos. view full answer...
The Draw-Tite # DT74MR is definitely a good place to start when setting your 2021 Hyundai Sonata to tow your jet ski and trailer. You are correct in that you will need a few more parts to get everything connected and working properly, though.
First will be a ball mount and ball. Finding the correct one for this will depend on a few measurements, so these will be examples. To find the correct amount of drop or rise needed, you will need to measure from the ground to the bottom of the coupler... view full answer...
Okay, we can get your 2022 Hyundai Tucson set up with a 7-way so you can do some towing with a hitch that fits your vehicle, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT22MR.
What you will need are a couple of parts; first the 4-flat, which will power your trailer's lighting, and you'll plug that into the 7-way, which gives you the rest of the wiring needed to control your trailer's brakes. The correct parts are the following:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole... view full answer...
By themselves no, we do not carry those washers as a replacement. If those are all you're needing I'd recommend sourcing them from your local hardware store as the only way you'd get those washers from us is through the replacement hardware kit # RHK.
This kit would give you all the hardware for your hitch, not just the washers you're needing. view full answer...
For your 2020 Hyundai Palisade, we do have a couple of options for a roof rack.
The first option you can use is the Yakima JetStream Crossbars # Y00426 with the towers # Y28TR, and the fit kit # Y06145 & # Y06138.
These cross bars are rated for 165lbs, and measure 60" long. These cross bars are aerodynamic, have a t-track channel for roof mounted accessories, and will provide a quiet, low-profile option that will work great with your Palisade.
The other option you can choose from is... view full answer...
I checked with Yakima and the correct adapters to use your Sightline towers with the Yakima CoreBar is the Replacement Adapter and Seat for Yakima CoreBar Crossbars # 8880639. view full answer...
Go To Results