Yes, it does. The Curt Hitch item # C23WR is confirmed to fit the 2024 Hyundai Santa Cruz. It is custom fit and bolts to your Hyundai with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like when installed.
If you are planning on towing you will also need a wiring harness item # 119250KIT... view full answer...
The Curt Trailer Hitch item # C23WR and the Draw-Tite Hitch item # DT48GR are almost identical and are both confirmed to fit the 2023 Hyundai Santa Cruz.
The main differences between the two hitches are that the Curt is made in the USA and the Draw-Tite has a built in tab to mount a 4-way or 7-way wiring bracket.
Both hitches are a class III, with a 2" receiver, that weigh right at 40 lbs. They have a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. Neither one of them... view full answer...
Yes, the Draw-Tite Trailer Hitch item # DT48GR does fit the 2023 Hyundai Santa Cruz. We have a different part number but it is the exact same hitch. This hitch is custom fit and bolts to your Hyundai with included hardware.
The Draw-Tite Trailer Hitch item # DT48GR is a class III hitch, with a 2" receiver, that weighs 40 lbs. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. It can not be used with a weight distribution system. This hitch is made in the USA.
I really... view full answer...
The best hitch for your 2023 Hyundai Santa Cruz is going to be the Curt Trailer Hitch item # C23WR. This hitch is custom fit and bolts to your Santa Cruz with included hardware.
The Curt Trailer Hitch item # C23WR is a class III hitch, with a 2" receiver, that weighs 38 lbs. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. It can not be used with a weight distribution system. This hitch is made in the USA.
I really like this hitch because it mounts right behind... view full answer...
The SkyRise Tent Kit for Yakima EasyRider Trailer # Y08127 is just a stabilizer kit, so the fit of the Roofnest Sparrow XL won't change. This roof tent will still mount to a set of crossbars like what's on the Yakima EasyRider Double Decker Trailer - 14-1/2' Long # Y08129.
As far as the fender situation is concerned, I have not personally heard of any problems with the fenders being troublesome so I'll assume they fixed the issue. view full answer...
What you will do to mount the Curt 4-way for your 2022 Hyundai Santa Cruz is add mounting brackets to the Curt Trailer Hitch Receiver # C23WR.
What you will need for the 4-way and brackets are the following parts:
- Curt T-Connector Vehicle Wiring Harness # CU94FR
- Mounting Bracket 4-Pole Flat # 18144
- No-Drill Mount Bracket, Long # 18136
What you'll do is use the included hose clamp to attach the No-Drill bracket directly to the hitch, and then attach the Mounting Bracket directly... view full answer...
The Yakima DeepSpace 10 Rooftop Cargo Box # Y65RR will fit the Rhino-Rack Vortex crossbars on your 2022 Hyundai Santa Cruz just fine but there will be some overhang. Attached is a photo of the DeepSpace on a 2020 Jeep Gladiator that has a 60" long bed. According to my research it looks like your Santa Cruz has a 48" long bed so you'll likely have 8" - 12" of the box hanging off the back of your pickup.
You might consider using an orange flag like part # EM05303 so other drivers can easily... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13420 is not a confirmed fit for a 2022 Hyundai Santa Cruz.
However the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C23WR is a custom fit hitch that requires no welding. It is completely bolt on.
It has a max gross trailer weight of 5 thousand pounds and a max tongue weight of 750 pounds. view full answer...
Yes, the Inno Box 320 Rooftop Cargo Box part # IN94FR will work great on a 2023 Hyundai Santa Cruz with factory roof rack. The aero shaped crossbars this vehicle uses are a very standard shape/size and there will be no issues mounted the above cargo box to them. view full answer...
Currently the Inno Velo Gripper Bike Rack # INRT201 has never been tested on a 2023 Hyundai Santa Cruz. I took some measurements of the clamp you can use to check and see if it will fit on your bed rails(see image below). If the clamp will fit your bed side rails you will need to check the length of the bike you intend to haul with the length of your bed with the extender installed. As bikes have several different lengths depending on the type and size some will fit while others may be too long. view full answer...
Yes, you will be able to put 2 bikes on the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount # Y01-130B if the combined weight of the racks and bikes is exactly 220 pounds (or under).
As far as the fitment of the # Y01-130B on your 2022 Hyundai Santa Cruz, that is a bit more complicated. The tracks will fit with the included hardware with drilling. With the 63" tracks, you can cut the tracks to the size of the bed rails. The complicated part is the crossbar fitment.... view full answer...
You can add a 7-way to a 2022 Hyundai Santa Cruz, but there isn't a plug and play option. First you'd need to add a 4-way (which is actually plug in), then the 7-way, which will need to be hardwired. The correct parts are the following:
- 4-Pole Flat Trailer Connector # C59236
- Universal Installation Kit for Trailer Brake Controller # ETBC7
You will first install the 4-flat, which will activate the trailer's lighting functions, and you'll then plug that into the 7-way that comes with... view full answer...
You will need to check for the factory trailer wiring connector on your 2022 Hyundai Santa Cruz to determine if you will be able to use the Curt T-Connector Vehicle Wiring Harness # C68JR. Just because your Santa Cruz did not come from the factory with a receiver and wiring does not mean the factory wiring is not there. I have linked an installation video for the 4-Way # CU94FR below as it also ties into the factory connector.
If you do not have the factory connector then you will be... view full answer...
Yes, there is a hitch confirmed to fit the 2024 Hyundai Santa Cruz.
- Curt Trailer Hitch Receiver # C23WR
This hitch is confirmed to fit your Santa Cruz, has a bolt-on, no-drill installation and provides you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. view full answer...
Yes, we do have the Curt Trailer Hitch Receiver # C23WR which has been confirmed to fit your 2024 Hyundai Santa Cruz. I do recommend also installing the Curt T-Connector Vehicle Wiring Harness # C68JR when you install the receiver. This will give you the larger 7-blade connection or you can use the Adapter # PK12716 if you are towing a smaller trailer with only a 4-way flat connector. view full answer...
The Curt Trailer Hitch Receiver item # C23WR is a confirmed fit for your 2022 Hyundai Santa Cruz and will provide you with a sturdy platform for hauling a bike rack. The Curt item # C23WR and Draw-Tite item DT48GR hitches are nearly identical class III hitches and we have not heard about any issues with swaying bike racks. I can confirm that you will not have any twisting issues.
The Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories item # 18050 is required for use on 1-1/4"... view full answer...
We do have 4 different kits listed from 2 different manufacturers. The first is the Curt # C59236 which is a universal style harness that will give you a 4-way flat connector.
This is needed if your 2022 Hyundai Santa Cruz does not have the factory tow package connector. There are 2 options from Curt a 4-Way Harness # CU94FR and a 7-Way Harness # C68JR. Both of these connect to the factory connector.
I do see that the Curt # CU94FR is also confirmed to fit your 2020 Hyundai Santa Fe.... view full answer...
We have great tonneau covers that fit your 2024 Hyundai Santa Cruz like the Lomax Stance part # LOM72DR which is a folding cover but we do not have a Pace Edwards Switchblade that fits your vehicle. view full answer...
We have hard fold up style tonneaus that fit your 2023 Hyundai Santa Cruz like the Lomax Stance part # LOM72DR which we can guarantee will fit your vehicle but we do not have any retractable options. The cover you found does not fit your vehicle. view full answer...
If you're wanting to add a 4-way to power your trailer's signal lights then you need the Curt # CU94FR. If you want to add a 7-way to your 2024 Santa Cruz then you can use the Curt # C68JR. Both of these plug into the tow package you referenced for a simple installation. view full answer...
Go To Results