The ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT will work on any trailer which uses a 4-way flat trailer connector which is the most common type. It doesn't matter what type of lights the trailer has whether it's incandescent or LED. It also does not matter how many lights the trailer has within reason. The only compatibility concerns you should have would be on the vehicle side but if you can let me know the year, make, and model of the vehicle I would be glad to confirm... view full answer...
I checked with the manufacturer, Tekonsha, and the ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT is a confirmed fit for a 2022 Hyundai Kona. That said, I do have a better option for you in the Curt T-Connector Vehicle Wiring Harness part # C99KR which offers a much easier installation and it also splice-free. It provides the same four way trailer connector as well and it's what I recommend. view full answer...
If the Baja Bug crossbars you have on your 2020 Hyundai Kona EV has 4-8 inches of overhang, you can use the hullavator. From where the foot meets your roof, measure from the outside of the foot to the end of the bar to get that measurement. Also, you will need at least 57 inches of crossbar space as well to fit two Thule Hullavators # TH898 on your roof.
If you're needing a new roof rack for this set up to work, you can use these 60 inch Thule Wingbar Evo crossbars # TH711520, the Evo... view full answer...
Yes. The Curt # C11529 is a confirmed fit on the 2020 Hyundai Kona, including AWD versions. This Curt hitch has a 1-1/4" hitch receiver so it will be perfect for your current bike carrier with a 1-1/4" shank. I've also linked the instructions for installation of this hitch so you can get an idea of what it entails. view full answer...
I checked with Curt and their trailer wiring harness part # C99KR is a confirmed fit for the 2023 Hyundai Kona ev as it is a fit for all models. view full answer...
The Vortex Aero crossbar system is going to add about 3-1/2" - 4" to the height of your 2022 Hyundai Kona on tp of those factory rails. Here are the parts you'll need for this system:
49" Vortex Aero Crossbars - # RRVA126B-2
RCL Legs - # RRRCL4
Rear Wedges - # RRSUB0671
RCP Fit Kit - # RR66QJ
If you let me know what you plan on using the roof rack for I'd be more than happy to make any other recommendations you might need! view full answer...
I think maybe our fitguide is causing a bit of confusion, but the Draw Tite hitch part # DT52GR is a confirmed fit for your 2022 Hyundai Kona Electric SEL. This fits the electric and non electric models which the way our fitguide is configured causes confusion because the same hitch shows up more than once. Please feel free to ask anytime that it is not clear. view full answer...
For your 2022 Hyundai Kona, since you do not have LED taillights, the correct fit is the Curt T-Connector Vehicle Wiring Harness # C99KR. view full answer...
Yes it still holds true (as of 7/2023) that you need to use the Curt Cam Buckle Stabilizing Strap for Hitch # 18050 when carrying any non-trailer loads or loads not supported by tires like bike racks and cargo carriers with Curt Trailer Hitch Receiver # C11529.
The Draw-Tite Max-Fram Trailer Hitch Receiver # DT52GR does not require any additional straps or support and it has the more desireable 2" hitch opening. It also has a 100 lb more tongue weight capacity than the hurt. I would... view full answer...
While we don't have hitches that fit the EV versions of the 2019 Hyundai Kona we do have trunk mounted bike racks like the Yakima FullBack 2 bike rack part # Y02634 which is a confirmed fit and would work well. This securely attaches to the rear door of your vehicle and provides a way to easily carry 2 bikes.
Check out the review video I attached for more info on this as well.
Bien que nous n'ayons pas d'attaches compatibles avec les versions EV de la Hyundai Kona 2019, nous avons des... view full answer...
It looks like the fit kit between each vehicle is different so while their flush mount rails might look similar, there are enough differences that you can't use the same equipment.
The roof rack I recommend for your 2021 Hyundai Kona with the flush rails is the WingBar Evo system which uses the following parts:
50" WingBar Evo Crossbars - # TH711320
Evo Flush Rail Feet - # TH710601
Fit Kit - # TH67JV
Lock Core Kit - # TH450400
If you already have any of these parts from your Santa Fe... view full answer...
At one point the Seasucker Board Carrier part # 298-BX1806 that you referenced was listed as only being able to carry one board at a time but it now has been confirmed to be able to carry two at a time so this would work great for your 2020 Hyundai Kona with a naked roof. view full answer...
For your 2019 Hyundai Kona Electric we have the Draw Tite part # DT52GR as a confirmed fit which would do a great job carrying a bike rack like the Hollywood Racks Trail Rider part # HR200Z view full answer...
I am happy to verify for you that no drilling, fascia trimming, or cutting is required during the installation of the trailer hitch receivers that fit your 2022 Hyundai Kona:
- Curt Trailer Hitch Receiver # C11529 view full answer...
The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers.
In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit... view full answer...
The best economical roof rack for your 2021 Hyundai Kona depends on whether your vehicle has a bare roof or flush factory rails.
If your Kona has a bare roof, I recommend the following setup:
- Round 48" CrossBars for Yakima Roof Rack System # Y00408
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06131
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175
- Yakima Same-Key Lock Cores #... view full answer...
The Curt Trailer Hitch Receiver part # C11529 which fits the 2020 Hyundai Kona will not require any permanent modifications to the vehicle so you can revert the vehicle completely back to stock once your lease ends without having to worry about any charges for damage. The Curt hitch is a 100% bolt-on fit with no cutting or drilling required. I recommend the Curt hitch as they just tend to fit a bit better in my experience but either option is a good choice that will work well.
If you don't... view full answer...
The Curt Trailer Hitch Receiver # C11529 is a confirmed fit for the 2022 Hyundai Kona. We have several reports of this hitch being installed on the 2022 without an issue, but it may be possible your hitch is slightly bent. One thing that is consistently said is that there isn't a lot of room and the hitch is a tight fit. Since your holes align for installation and it would only be off by a slight margin, you should be able to flex it into place while it is attached to the vehicle frame.
I... view full answer...
2 inch trailer hitches are typically only made for vehicles with higher towing capacities like trucks and SUVs. Since your 2018 Hyundai Kona is a lighter duty vehicle there are only 1-1/4 inch hitches made for it like the Curt # C11529 that you referenced. Then for trailer wiring we have the zero-splice kit # 119250KIT as a fit that I recommend that easier to install and also very reliable.
For a ball mount you'd then want the part # C45521 and for hitch balls # A-82 for a 2 inch ball... view full answer...
Go To Results