With a hitch installed on your 2013 Hyundai Accent hatchback like the Draw Tite part # 24884 the best single bike rack option we have would be the RockyMounts HighNoon FC Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount # RKY87RR which will fit the hitch and work well. This rack only grabs the bikes at the tire which prevents any damage to delicate frame materials or finishes.
I attached a review video for this bike rack for you to check out as well. view full answer...
We have one roof rack available for your 2010 Hyundai Accent. I recommend the Inno Square Bar roof rack consisting of the following:
Inno Square Crossbars - Steel - Black - 46" Long - Qty 2 # INB117
Inno Feet for Square Crossbars # INSUT
Short Roof Adapter Kit # INJK
Custom Fit Kit # INK214 view full answer...
The Saris Bones 2 Bike Rack is a confirmed fit for your Hyundai, and at a great price.
If cost is not a factor and you wanted more features, the best trunk mounted bike rack for your 2014 Hyundai Accent Hatchback in my opinion is the Thule OutWay, # TH45JV because it has an upgraded bike cradling system with road dampening and includes the locks to secure the bikes to the rack and the rack to the vehicle. This bike rack will also allow you to adjust the arms to accommodate the space needed... view full answer...
While we do have a hitch that is confirmed to fit your 2004 Hyundai Accent, it does require drilling. That is the Curt Class I # C11214. This hitch works well with hitch-mounted bike racks and provides you with 200 pounds of maximum tongue weight for transporting your bikes and rack. It also comes with a great outer coat over the base powder coat that provides you with superior protection against rust and corrosion so you do not need to worry about deterioration.
If you haven't yet chosen... view full answer...
Starting with the trailer hitch for your 2010 Hyundai Accent, I do recommend the Draw-Tite Class I Sport Frame Receiver Hitch # 24795 referenced in your question. This is a Class I hitch that will provide a towing weight capacity of 2,000 pounds. I like this model over the Curt alternative also confirmed to fit your vehicle because unlike Curt, Draw-Tite does not require the use of stabilizing straps like # 18050 with non-trailer loads such as bike racks and cargo carriers. After your move... view full answer...
Aside from the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch, part # 24795, you would need the following items to complete your towing setup:
Sportframe Drawbar 4 inch Rise 2000# Kit, part # 3594
Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, part # 19256
Draw-Tite Wiring for the Hyundai Accent, 2011, part # 119178KIT
I have included installation instructions for the # 24795 as well as an installation instructional video.... view full answer...
The Curt Hitch part # C11250 that you referenced is a Class I hitch which means it can only carry up to 2 bikes at a time. Any more than that and you will end up putting an undue amount of stress on the hitch/vehicle attachment points. Since Curt require you use a stabilizer strap when carrying a bike rack and Draw Tite does not I would recommend the # 24884 for your 2015 Hyundai Accent instead.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule... view full answer...
All of the Atwood surge brake actuators and their replacement parts are no longer available. The only and best solution (since they weren't designed well) is to replace the entire actuator with a better model. The Titan actuator part # T63FR is a great option that would work well as a replacement for your drum brake setup. view full answer...
The Roadmaster InvisiBrake part # RM-8700 has been confirmed to fit your 2012 Hyundai Accent; however it isn't the best system for you since your Tiffin Allergo Breeze has air brakes. The InvisiBrake uses the motorhome's brake lights to trigger the Hyundai's brakes. This can cause false braking and additional wear on the Accent when using the RV's exhaust brake. To prevent this use a system designed specifcally for air brakes like the Air Force One # SM99243. It doesn't use the motorome's... view full answer...
For your 2009 Hyundai Accent with the Blue Ox Aladdin tow bar, the Roadmaster Base Plates, part # 1623-1, you referenced would work, but would also require a base plate adapter, part # RM-032. The base plates are still in production at the manufacturer. You will want to consult your owners manual for any specific information about your vehicle and flat towing.
I would recommend the Blue Ox Base Plates for the 2009 Hyundai Accent, part # BX2323. This eliminates the need for an adapter,... view full answer...
To flat tow your 2008 Hyundai Accent behind your Class C motorhome, you will need 5 basic items, a base plate kit, tow bar, safety cables, a lighting solution that ties your motorhomes indicator lights to the Hyundai and a supplemental braking system.
- Base Plate, Blue Ox Base Plate Kit, # BX2323
This will only work with vehicles that do not have foglights. Let me know if you do.
- Tow Bar, Blue Ox Alpha Tow Bar, # BX7380
This comes with needed safety cables, so no extra... view full answer...
Your 2012 Hyundai Accent 4-door sedan can be equipped with one size and grade of trailer hitch receiver, the 1-1/4-inch size with a Class I rating. The link provided will take you to our product page that shows all four hitches offered for your vehicle. All are rated for 200-lbs maximum tongue weight. Of the four I recommend the Draw-Tite # 24884 for its simpler installation. No drilling is required to install this hitch and the necessary hardware is included.
The Yakima RidgeBack 2 #... view full answer...
That's a lot of weight to put on the roof of a vehicle. Your best option will be to tow a small trailer like the CE Smith Boat Trailer part # CE48810 since the weight of your kayak is more than what your roof and kayak carriers are designed to accomodate.
For a hitch you'd need the part # C11094 with ball mount # 3594 for if you have a hatchback or part # 24760 with ball mount # 3590 for if you have a sedan. For a hitch ball you'd then want the # 19258 which matches the coupler size of... view full answer...
The # Draw Tite Hitch part # 24884 that you referenced does have stops built into it to prevent Class II accessories so what you'd need instead is the Curt # C11250 which does not have the stops and will allow you to use the # HTAD. view full answer...
Not all 1-1/4 inch to 2 inch hitch adapters are Class I compatible but we do have the part # HTAD which is and would work great with the Draw Tite hitch part # 24884. view full answer...
Yes, instead of the 44 inch crossbars part # RRVA118B-2 you would get the Rhino-Rack Vortex Aero Crossbar # RRVA126B-2.
To complete the roof rack for your 2013 Hyundai Accent you would need the following components:
Rhino-Rack 2500 Series Leg Kit # RRRLKVA
Custom DK Pads for Rhino-Rack 2500 Series Roof Rack System # DK289 view full answer...
The Hidden Hitch part # 60301 and the Draw Tite part # 24884 are the exact same hitch as they are made by the same parent company that bought out both brands.
The Curt hitch part # C11250 is made by a different company so it is slightly different. But it's not the hitch I would recommend as it has a stabilizer strap requirement when carrying a non-supported load like a bike rack so the best option we have is the Draw Tite part # 24884 as the Hidden Hitch is actually getting phased out. view full answer...
The Yakima Q Tower roof rack will fit your 2003 Hyundai Accent 2-door model and it will support a kayak carrier and a bike rack. Most kayak carriers require a minimum crossbar spread of 24 inches and this roof rack will have a crossbar spread of 28 inches once it is installed. The crossbar spread is the distance between the front and rear crossbar on center. The parts that you will need for the complete roof rack are listed below.
Inno Square Crossbars - Steel - Black - 46" Long - Qty... view full answer...
There are a lot of great options for bike carriers for use with your 2012 Hyundai Accent, but the only 4-bike carriers available for your vehicle are hitch-mounted carriers which require Class II or Class III hitches and the only hitches available to fit on your vehicle are Class I.
Instead, I recommend using a hitch-mounted bike rack such as the Thule Camber 2 Bike Rack # TH9058 for two of your bikes and a roof-mounted bike rack such as the Rhino-Rack Road Warrior Rooftop Bike Carrier... view full answer...
We do have some trailer hitches that will fit the 2012 Hyundai Accent 5-Door Hatchback, including # C11250. I have included a link to the installation instructions for you to view.
The hitch comes with the correct ball mount, pin, and clip. If you plan on doing some towing, you can use 1-7/8 inch diameter ball # 19256 or 2 inch ball # 19258. For wiring, use # C56175. I have included a link to the installation details for the wiring as well. view full answer...
Go To Results