The Rightline Gear Sport 3 Rooftop Cargo Bag - Waterproof - 18 cu ft - 48" x 40" x 19" # RL100S30 (18 cubic feet) will work well for your factory roof rack. This will attach to your factory roof rack to secure it or can be secured to the door jambs if preferred. The bag can fit over the rails so there isn't a minimum size.
Considering the height of your H3, you might want to include the HitchMate TireStep # HE4040. This is a slip-on wheel mount step that makes accessing your cargo... view full answer...
Yes, I checked with Yakima and they have confirmed that the Loadwarrior with Extension part # Y07070-74 is a confirmed fit for the factory crossbars of your 2008 Hummer H3. view full answer...
We do have a fit for your 2007 Hummer H3, but the CIPA Custom Towing Mirror - Slip On - Driver Side # CM11551 wil not fit. They actually only fit 2015-2019 Ford F-150.
The towing mirrors I recommend are the CIPA Universal Towing Mirrors - Clamp On - Qty 2 # CM11980-2. These mirrors easily clamp onto your existing mirrors and are a fit for your 2007 Hummer H3. Another reason I recommend these is that they pivot 360 degrees to give you the view you need at all times. view full answer...
There is a good possibility that the Swagman Trailhead, # S63360, will clear the spare tire on your 2007 Hummer H3 as this rack has a fair amount of clearance. From the center of the hitch pin hole to the back of the upright bar, the distance is 14-1/2 inches.
You will need to measure the distance from the center of the hitch pin hole on your H3 out to the distance required to clear the spare tire. If this distance is less than 14-1/2 inches, the rack will fit. I have included a link... view full answer...
There is no cutting or trimming of the bumper on the Hummer H3 when installing the Draw-Tite Class III Trailer Hitch, # 75382. The installation on your Hummer H3 is a very simple bolt-on application. The hardest part might be lowering the exhaust for ease of installation.
I am sending a link to the installation instructions for the Draw-Tite Class III Trailer Hitch, # 75382.
If you will be towing, you will need the Curt Ball Mount, # C45010, and the Pin and Clip, # PC3. You will also... view full answer...
The hitch you ordered is the Draw-Tite # 75382 which is a 2 inch Class III receiver. For a standard hitch pin and clip use part # PC3. If you prefer a locking pin part # e98882 will fit the hitch.
I've also linked our complete selection of ball mounts that fit. One I like to recommend is the B&W Tow & Stow, part # BWTS10037B. It's adjustable with two different ball sizes so it can be used with a large variety of trailers. It also flips under itself to a stored position to keep it... view full answer...
Bar style friction sway control units such as # 83660 are not trailer or vehicle specific. On the trailer, the side of the frame will need to be clear 21 through 27 inches back from the center of the ball cavity of the trailer coupler. The bracket that mounts on the trailer end is 3 inches tall.
On the vehicle side you will need to use bracket # RP26003 with a ball mount. The friction sway control bar comes with everything else you will need. view full answer...
Yes, you can use the RockyMounts HighNoon FC Solo Bike Rack for 1 Bike # RKY87RR. Since the RockyMounts HighNoon works with either a 1-1/4" shank or a 2" shank, I am certain that this will directly fit your 2006 Hummer H3 using the 2" hitch receiver like the one found on the Curt # C13270. view full answer...
The Curt roof mounted cargo basket # C18115 fits crossbars up to 3 inches wide and the center to center distance between the crossbars must be at least 15 inches. Curt does not have a fit guide for this product so you have to go by the measurements.
A safer bet would be to go with a basket that has been confirmed to fit the factory roof rack on your 2006 Hummer H3. Other cargo baskets that are confirmed to fit include the following:
Yakima MegaWarrior, # Y07080
Yakima MegaWarrior with... view full answer...
The item you selected, Thule Roof-Mounted Bike Carrier, part # TH859XT is designed to work with round, square, aero, elliptical, and most factory crossbars so it could work on your Hummer.
A Roof Mounted Bike Carrier I would recommend that would work with your Hummer, is the Fork Style Roof Mounted Bike Rack, part # S64710 . This bike carrier fits factory cross bars and will work great on your 2006 Hummer H3 with roof rack rail cross bars. Part # S64710, is similar to the Rola Roof-Mounted... view full answer...
Yes. You can install the RedArc Tow Pro Liberty # RED24FR on a 2008 Hummer H3 using the available wiring under the dash. There is not a plug in adapter on the 2008 H3, so you would need to hard-wire in the brake controller, but the wiring is present to make this installation fairly easy. You'll want to use butt connectors like the # DW05745-5 to make the connections to the existing wires and you can use one of your existing slots on the dash to install the knob that comes with the Liberty.... view full answer...
The SportRack Hitch and Cable Lock you referred to, part # A32022 isn't completely compatible with the SportRack Ridge Swing # SR2415 bike rack. The anti-rattle hitch portion of the lock will indeed work with the rack, but the cable lock portion is not compatible.
You can purchase the anti-rattle lock portion by itself as part # SR0901. If you were needing a cable lock, the etrailer brand # e98891 would be a good choice. view full answer...
The Yakima LongHaul 4-Bike RV Hitch Mounted Rack # Y02476, will fit on your Hummer H3 if the measurement from the center of your hitch pin hole to the furthest part of the spare tire is less than 9 inches. I have included review videos for this rack below.
The hitch mounted, tilting 4 bike rack with the most clearance is the Folding 4 Bike Dual Arm Rack - Swagman Trailhead, # S63380. It measures 13 inches from the center of the hitch pin hole to the back of the upright bar. I have included... view full answer...
The Westin Oval Tube Steps w/ Custom Installation Kit part # 22-5050-1635 will fit a 2006 - 2010 Hummer H3 but that's all. However, there are different install kits which allow you to use them on other vehicles as well. view full answer...
The Blue Ox Bolt-On Base Plate Bracket Kit - 5,000 lbs Item # BX88230 is compatible to be used with any vehicle as long as where it will be mounted is structurally sound enough to tow the vehicle. For instance some off road steel bumpers with D-ring mounts can not be used to tow a vehicle because they have not been tested by the manufacturer to see if they can hold up to the stress the movement of the vehicle puts on that area.
For your 2006 Hummer H3 I recommend Demco Classic Base Plate... view full answer...
I have a potential solution for you, but there aren't any custom fit ladder racks for a 2007 Humvee so we will be looking into "uncharted" territory for your setup.
The only ladder rack that I can see possibly working for your application is the Yakima OverHaul HD when it comes with the track mount. The smallest configuration is with 54" tracks (that can be trimmed to length) and then you just need to choose the best crossbar width for your vehicle:
- 60" Crossbar Kit # Y22AR
- 68"... view full answer...
According to Thule, the Spare Me 2 Bike Carrier, # TH963PRO, will fit your 2007 Hummer H3 as long as you have the factory size spare tire. We have not had a chance to install this bike rack on an H3 yet, but I attached an installation video on a Jeep Wrangler to give you an idea on what is involved to install the bike rack. view full answer...
The Safari Roof Cargo Basket part # SPS5084-1101 that you referenced is designed to fit the roof's of vehicles that have raised side rails that are on either side of the roof. So it would need 2 rails to fit and install. view full answer...
The Thule Tepui Explorer Autana 3 Rooftop Tent with Annex # TH8001ASK05 does have a few requirements to fit on your 2006 Hummer H3:
You'll need crossbars that are spaced 32" apart with a 33.5" railing distance (pictured below).
They'll need to have a minimum weight capacity of 165lbs.
They'll need to be within a maximum width of 3.25" and height of 1.5".
If your crossbars sit on raised rails then the rails will need to have supports in between the ends as well to handle to weight.
If... view full answer...
Go To Results