The Curt Hitch # C11416 for your 2020 Honda HR-V is a Class I hitch with a 200 tongue weight capacity. For that reason, the Yakima HoldUp # Y02445 is actually not compatible with this hitch since it is designed for Class II 1-1/4" hitch receivers. They did that because it can carry heavy electric bikes of up to 60 lbs each. 120 lbs of bike weight plus the 50 lbs rack weight can come close to maxing out Class I hitches.
Either way, I would still prefer the Kuat Transfer V2 # KU74FR for... view full answer...
For your 2017 Honda HR-V we have the EcoHitch 2" receiver hitch # 306-X7322 that you can use with your 4-bike rack as long as you stay under the 300-pound tongue limit when you add the weight of the bike rack and the weight of the bikes. This should not be a problem. Check out the review and installation video I attached for more info.
The other hitch available for your HR-V, the Curt # C11416, is a class I with a 1-1/4" opening. It would only allow you to carry 2 bikes even if the... view full answer...
Actually the Yakima EasyTop Universal Fit Roof Rack # Y07418 that you referenced comes with straps so you would not need to pick out a set.
We do not have a way to get you the roof rails that run front to back on your 2018 Honda HR-V but if you wanted a roof rack with crossbars that run from left to right the Rhino Rack roof rack part # RRVA118B-2, # RRRLKVA, and # DK454 would be a great option that is confirmed to fit. This rack has aero shaped bars to minimize wind noise and is much... view full answer...
Yes, the 7-Way Super Sealed Connector w/4' Cable Vehicle End part # 50-87-004 that you referenced is compatible with standard 7-way sockets like the Pollak # PK12706. view full answer...
There is currently only one suspension enhancement option for a 2018 Honda HR-V, the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension part # CSS-1168. The SumoSprings install in-between the coil and prevents sag while loaded or towing. view full answer...
Thule did completely change their roof rack designs recently so there definitely isn't a way to adapt your old rack to fit your 2019 Honda HR-V with flush rails. The Rhino Rack RVP roof rack part # RR55QJ is a confirmed fit for your vehicle though and would be a great option unless you wanted an assisted board carrier like you mentioned. Assisted carriers need a rack that has bars that overhang past the feet of the rack like with the Rhino Rack roof rack part numbers # RRVA118S-2, # RRRCL4,... view full answer...
With the Curt hitch # C11416 the recommended ball mount is # C45521 which is 7-1/4 inches long. Then for a ball you'd want part # 19256 for a 1-7/8 inch ball or part # 19258 for a 2 inch ball.
For trailer wiring you'd then want the part # 118673. view full answer...
The Swagman Chinook 2 Bike Platform Rack # S64683 referenced in your question will work great on your 2016 Honda HR-V with a Draw-Tite Trailer Hitch installed. This particular carrier will fit both 1-1/4 inch and 2 inch trailer hitch receivers, so there will be no compatibility issues with the hitch receiver on your vehicle.
This is a great rack that will hold up to 2 bikes at 45 pounds each. It includes locks to secure the bikes to the rack and the rack to your vehicle. A great feature... view full answer...
Based on your dimensions you do need a 1 inch rise. Now that said Class I hitches you have to use only the recommended ball mount from the manufacturer would be the part # C45521. Due to the lower capacity of the Class I hitches using a longer or larger ball mount might cause excessive strain on the hitch.
For a hitch ball you'd want the # A-82 for a 2 inch ball or # A-80 for 1-7/8 inch hitch ball. view full answer...
The power wire of the Curt trailer wiring harness part # C56284 that you referenced is 12 gauge. I also attached a link to a review video for this kit for you to check out as well. view full answer...
I can definitiely help you get a trailer hitch receiver installed on your 2019 Honda HR-V.
There are a few different trailer hitch receiver options but I highly recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7322 as it is the only 2x2 receiver option for your vehicle which will allow you the most options for accessories like bike racks or cargo carriers. This trailer hitch receiver will require trimming to the fascia of your vehicle and has a more difficult install than other... view full answer...
For a 2 inch hitch to fit our 2017 Honda HR-V and the 2 inch hitch Kuat Transfer part # KU74FR the hitch you would want is the EcoHitch part # 306-X7322 as this is only option we have that has the 2 inch opening for your vehicle and does not require using a stabilizer strap. view full answer...
The Rhino Rack roof rack you mentioned for your 2016 Honda HR-V part numbers # RRVA118B-2, # RRRLKVA, and # DK454 will have a bar space of 29-17/32 inches. Which the Sportrack cargo box part # SR7018 that you referenced is compatible with so this would be a great solution for you. view full answer...
I spoke with Yakima and based on what you stated, the Replacement Mounting Hardware part # Y8890176 will allow you to use the Yakima KingPin 2 Bike Rack. view full answer...
In regards to using a truck mount bike rack like the Saris Bones EX 2 Bike Rack part # SAR83FR, you will not be able to open the hatch/trunk with the rack attached as you risk damage to the vehicle. The trunk/hatch is not designed to support lifting the weight of the rack and it can shift while in motion causing further damage. That said, this is not just a rule for the Saris Bones but all rear mount bike racks.
If you want to be able to open the hatch/trunk with a rack you'll have to... view full answer...
Since all of the trailer hitches for your 2016 Honda HR-V are Class I like the part # C11416 your best option is going to be to then go with a cargo carrier that is rated for the same hitch classification.
For that the Curt part # C18145 is the most popular option. It would fit and work well on your vehicle so we would recommend it for you as well. view full answer...
For your 2018 Honda HR-V, I recommend the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7322. This is the only 2 inch receiver we have compatible with your vehicle and you will need a 2 inch receiver for most carriers compatible with a scooter. This hitch will have a 300 lb tongue weight rating, so your 73 lb carrier and 81 lb scooter will get you to 254 lbs of your 300 lb total capacity so it will work well.
Any of the 1-1/4 inch receivers would not be able to work... view full answer...
I recommend the Curt Trailer Hitch Receiver # C68DR for your 2023 Honda HR-V, due to Curt's deserved reputation for quality.
If you need a wiring harness as well, the correct fit for your '23 HR-V is the T-One Vehicle Wiring Harness # 118673 which will give you a 4-way flat connector. view full answer...
For your 2017 Honda HR-V, you have a lot of great choices. Your vehicle can be equipped with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7322. This will allow you a wide array of choices of bike racks.
I recommend the Thule EasyFold XT, part # TH903202 is a fully featured bike rack that is especially useful because of its ability to adjust to a wide variety of frame styles and bike widths. It also comes with keyed alike hitch and integrated cable locks for added... view full answer...
Since your 2022 Honda HR-V has the flushed rails all of the roof rack fits will have the same crossbar spread as they used pre-existing fixed points to anchor the roof rack. So what it will boil down to for your application is price vs quality and for the best option I recommend the Inno Aero roof rack setup:
51" Aero Crossbars - # INXB130-2
Through Feet - # INXS450
Fit Kit - # INTR159
The Inno brand has a sleek look and doesn't lack in quality, plus their price point is really hard to... view full answer...
Go To Results