bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Honda Civic


  • Does The Bumper Need To Be Cut To Install a Trailer Hitch Receiver on a 2022 Honda Civic Hatchback?
  • Both the Curt # C92UR receiver you found and the Draw-Tite # 24954 are going to require slight modification to the steel bumper and plastic fascia to fit your 2022 Honda Civic Hatchback. I have linked an installation video near the bottom of the page for a similar Civic which will show you what all is required. If this is something you are not sure you have the skills to install yourself you can also use our installer link located near the video to locate installers in your area. I do...
    view full answer...

  • Will Using a Hitch Mounted Bike Rack Behind a Grand Design Solitude 3460FL Cause a Failure
  • Since the trailer hitch receiver on your Grand Design Solitude 3460FL was installed and rated from Grand Design you know the frame is strong enough to support the weight of your Kuat Transfer V2 Bike Rack # KU84FR and 20lb bikes. Your Kuat rack was designed to stand up to the additional shock and bounce your trailer has over a standard vehicle receiver. Most people who run into issues is caused by add on receivers in which the trailers frame was not designed to support the additional weight...
    view full answer...

  • Best Single Bike Rack for a 2012 Honda Civic
  • The best bike rack to carry one bike with your 2012 Honda Civic is the RockyMounts HighNoon FC Solo Bike Rack # RKY87RR. This bike rack is compatible with Class 2-III 1-1/4" and 2" hitch receivers and comes with a limited lifetime warranty. The RockyMounts HighNoon can carry 1 bike up to 60 lbs with a max wheelbase of 52" and max tire width of 5". Since it is a wheel mount bike rack it can accommodate any bike frame style that doesn't have a front fender. The wheel mount is also great...
    view full answer...

  • Recommended Trailer Hitch Receiver For A 2022-2024 Honda Civic Si
  • Hey Anthony, Yes, the Curt Trailer Hitch Receiver # C92UR is designed to fit both hatchback and sedan models of the Honda Civic from 2016 - 2024, excluding models with a center exhaust. With your model not having a center exhaust you'll be good to go with the # C92UR and can follow along with Brad's installation video below to get this installed at home.
    view full answer...

  • Recommended Bike Rack and Trailer Hitch for a 2012 Honda Civic
  • In order to carry a bike on your 2012 Honda Civic, I recommend using a trailer hitch and hitch mounted bike rack. This option will give you the greatest variety of carriers to choose from, it will provide the easiest way to load/unload your bike, and you can always swap out the bike rack for a cargo basket or small trailer. In order to do the above, you are first going to need a trailer hitch for which I recommend the Curt Trailer Hitch Receiver part # C11391. This hitch has a Class I...
    view full answer...

  • Recommended Hitch and Bike Rack for 2014 Honda Civic SI
  • Although we do not have a package I would be happy to make a recommendation. The Curt # C11391 you looked at is the best option for a hitch on your 2014 Honda Civic SI. This is a Class I hitch with a 1-1/4" and a bolt-on installation. For a Class I compatible bike rack I recommend the Hollywood Racks Destination Bike Rack for 2 Bikes # HLY94FR. This platform style rack is lightweight at 20 lbs and has a weight capacity of 35 lbs per bike. It comes with an locking anti-rattle hitch pin...
    view full answer...

  • Center Exhaust Hitch Civic
  • I wish we had a hitch for your vehicle but nothing we have fits with the center exhaust.
    view full answer...

  • Parts Needed To Install a 7-Way and Trailer Brake Controller On a 2002 Honda Civic
  • You are able to just install a 4-way flat at this time and then later install the components needed for a 7-way and trailer brake controller. But it may be best to just do everything at once since you are going to have to run a power wire to the vehicle battery with both the 4-way and 7-way. First to determine which 4-way you need we need to know what body style you have. The coupe and hatchback version are going to use the 4-Way # C59236 while the sedan is going to use the 4-Way # C56341....
    view full answer...

  • Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  • Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
    view full answer...

  • Recommended Solution for a Noisy Bike Rack on a 2016 Honda Civic EX-L
  • Unfortunately Mark, there are no 2" hitch receivers available for a 2016 Honda Civic. Since you're not loving all of the wobbling from your rack, I'd recommend getting a anti-rattle device like the Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches # RM-061-125, which will clamp around your hitch/bike rack and tighten, hopefully eliminating all that ruckus.
    view full answer...

  • Is there a Hitch that Fits a 2019 Honda Civic w/ Center Exhaust?
  • No, there is not, sorry. The only hitch that fits the 2019 Honda Civic is the Curt item # C92UR and it does not fit the ones with center exhaust. If you are looking to haul extra gear or a bike rack the Rhino-Rack ROC25 Roof Rack for Naked Roofs item # RR78TR you were looking at are confirmed to fit the 2019 Honda Civic Hatchbacks.
    view full answer...

  • Parts Needed to Tow a Tent Trailer with a 2022 Honda Civic Sport
  • Hey Amy, thanks for reaching out! To tow a small trailer with your 2022 Honda Civic Sport you need a trailer hitch, wiring, and a ball mount: - Curt Trailer Hitch # C92UR - Curt T-Connector Wiring # C43VV - Ball Mount (see attached article) The hitch can tow up to a 2,000 lb trailer but from what I saw online your vehicle can only handle 1,750 lbs so that will be your limiting factor - you also need to confirm this in your copy of the owner's manual. The wiring tees in behind your...
    view full answer...

  • Recommended Concealed Trailer Hitches For a 2018 Honda Civic Sedan
  • Hey Robert, so for your 2018 Honda Civic Sedan the two options you have are the Draw-Tite Sportframe Trailer Hitch Receiver # 24954 and the Curt Trailer Hitch Receiver # C92UR. Both of these hitches have a class I 1 1/4" receiver, a hidden crosstube, and a 2,000 lb max capacity. They are essentially the same exact hitch, and they cost about the same, the only difference is who makes them.
    view full answer...

  • Recommended 4 Pole Trailer Wiring for a 2019 Honda Civic
  • Hey Joe, yes if you have the sedan you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118686 or if you have the coupe you can use # C56324. Both of these options are going to be plug and play and will plug into the vehicle harness which is located behind the driver's-side and passenger's-side tail lights. If you have the hatchback however, then you're going to need to use a universal harness # 119147KIT which will get spliced into your OEM wiring.
    view full answer...

  • Recommended Roof Rack for a 2024 Honda Civic Sedan w/ a Naked Roof
  • Congrats on the new car! The clamp on style roof racks have heavy padding and a soft base for the towers. They won't scratch your paint. For your 2024 Honda Civic, I recommend the Yakima Custom Fit Roof Rack Kit item # Y85QB. It has molded rubber pads that'll fit the contours of your roof. This aerobar roof rack has a 165 lbs capacity.
    view full answer...

  • Will The Blue Ox Base Plate # BX2265 Fit a 2019 Honda Civic Type R?
  • While I was able to find the Blue Ox Base Plate # BX2265 will fit the si edition I could not find any information on the Type R version of your 2019 Honda Civic. When I reached out to Blue Ox they said they have not confirmed the fitment or had any reports saying it would not fit either. You can watch our installation video which I have linked near the bottom of this page that will walk you through an installation we did in our shop. With this you will be able to see if the parts behind...
    view full answer...

  • Recommended Idler Hubs for an Older Boat Trailer With a 1" Spindle
  • Hey Joseph, depending on your bolt pattern I'd recommend going with either the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-545-2-G-1K for a 5 on 4 1/2" or the Trailer Idler Hub Assembly for 2,000-lb Axles # AKIHUB-440-2-G-1K for a 4 on 4. Both of these kits will fit your 1" spindle with the inner diameter of the bearings being 1 inch inner diameter for both the inner and outer bearings, include the races, seal, grease cap, and lug nuts and are galvanized for extra corrosion...
    view full answer...