We do have the trim kits you are looking for with the Putco Stainless Steel Fender Trim # P97302. This is the chrome trim that fits on just the top portion of the fender like you said you were wanting and does fit your 2004 Dodge Ram as well. view full answer...
I spoke with my contact at Putco and he said the Stainless Steel Fender Trim, # P97289, will work with the stock mud flaps on your 2009 Chevrolet Silverado 2500 HD, but there will be a small gap between the mud flaps and the fender well after installation.
For installation you will need to remove the mud flaps on your truck to install the trim and then you will attach the mudflaps on top of the trim piece. view full answer...
The Putco Stainless Steel Chrome Fender Trim # P97280 can be "Band Mounted" or screwed into the fenders of your 2023 Ford F-350 even if you don't already have fender flares. view full answer...
Yes, the Putco Stainless Steel Chrome Fender Trim # P97280 has been confirmed to fit a 2023 Ford F-350 with a Crew Cab, Regular Cab, and SuperCab. view full answer...
The OEM mudflaps on your 2009 Chevy Silverado do not require removal in order to install the Putco # P97295. If you have aftermarket mudflaps they would need to be removed, but they can be re-installed once you've got the fender trim mounted up. view full answer...
Since the Putco Stainless Steel Chrome Fender Trim # P97285 are a universal fit, I spoke with my contact at Putco who said that they haven't had any problems with customers fitting the trim on duallys so it should fit just fine on your 2018 Ford F-350 with Dual Rear Wheels.
I have attached the photos from the installation instructions for you to check out as well. view full answer...
If you have the wheel lip molding like I have pictured below in red then you'll want to use the WeatherTech Mud Flaps # WT110044-120044 instead of the # WT110050-120050. We do have a customer review photo for this specific fit but it's a bit hard to really see how well it interacts with the trim lip. That being said WeatherTech is pretty good with their fits so there shouldn't be any gaps between the mud flap and fender flare. view full answer...
The Putco # P97103 is a four piece stainless steel fender 4-piece trim kit that is a confirmed fit for your C/K Series 2500 Chevy pickup truck. It is not "chrome" but offers the same shiny finish.
Customers who enjoy the fender trim will frequently add on the Putco # P79611GM stainless steel mud flaps to complete the look. This set of 2 is a confirmed fit for your Chevy. Purchase 2 sets for all four wheels. view full answer...
I contacted our representative at Putco, and he informed me that Putco Stainless Steel Fender Trim, part # P97290, will fit your 2009 GMC Sierra if it is the 1500 model. If you have an HD model you will need part # P97291, for your 2009 GMC Sierra. view full answer...
The fitment of the Putco Stainless Steel Chrome Fender Trim # P97280 has been confirmed by the manufacturer. If you check out their website you can see that they list the # P97280 as a fit as well. view full answer...
Yes, the Putco Stainless Steel Chrome Fender Trim # P97280 is confirmed to fit a 2023 Ford F-250 crew cab, Regular Cab, and SuperCab. view full answer...
The decorative fender trim pieces on trailers usually does not hamper use of the Tailgater Tire Table part # TT54FR. That said, it does require a bit more caution when installing and removing to ensure the trim is not damaged. I don't have any clearance measurements for any one particular trailer but if you take a look at around the 3:50 mark of the attached video you'll see this being talked about more in-depth. view full answer...
I contacted our representative at WeatherTech and he informed me that the item you selected, WeatherTech Mud Flap 4-Piece Set, part # WT110006-120006, will fit your 2001 GMC Yukon XL with factory running boards. He informed me that running boards are not an issue for part # WT110006-120006, to fit.
Part # WT110006-120006, will only work on your 2001 GMC Yukon XL if you do not have the factory fender flare or fender trim.
If your vehicle has the factory fender flare or trim, you will... view full answer...
I reached out to my contact at WeatherTech and the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set # WT110035-120035 are compatible with factory installed fender flares. If you have aftermarket fender flares, they will not be compatible and the only workaround would be to trim your fender flares to install the mud flaps. view full answer...
The LED Reversible Trailer Fender Light with Chrome Trim part # MCL181ARCRB likely has 16-18 gauge wires so you'll use the Heat Shrink Butt Connector part # DW05744-5. view full answer...
The Putco Stainless Steel Fender Trim for Dodge Ram # P97302 that you were looking at is a fit for the front or rear wheel wells of your 2003 Dodge Ram 3500 quad cab. This comes with 2 trim pieces, so for the front and back you would need a quantity of two. view full answer...
My technical contact at Putco confirmed that if your 2015 Chevrolet Silverado 1500 has standard OEM mud guards these will not need to be removed to install their trim kit # P97295. If the truck has aftermarket mud flaps then those will need to be removed temporarily to allow installation of the trim kit; then they can be re-installed, according to my Putco contact. view full answer...
WeatherTech front and rear mud flaps # WT110031-120031 are designed to fit a 2016 Ford F-250 with the factory add-on fender flares. It sounds like that is what you have on your King Ranch so these are the correct mud flaps.
The ones that you referenced are designed for models that do not have those factory add-on fender flares. view full answer...