Expert Answers about Forest River

• Which Locks Secure The Thule Hullavator To Malone Airflow2 Roof Rack On a 2017 Toyota RAV4?
• While the Malone AirFlow2 Roof Rack # MAL84AR does include its own locks for securing the roof rack to your 2017 Toyota RAV4 you will need the Thule One-Key System # TH450200 to secure the Thule Hullavator Pro Kayak Roof Rack # TH898 to the crossbars.
  view full answer...


• Is There a 7/4-Way Trailer Connector Plus Brake Controller For a 2018 Mercedes Sprinter 2500?
• To get a 7/4 connector on your 2018 Mercedes-Benz Sprinter Steve, you are going to have to combine the Tekonsha OEM Replacement Vehicle Wiring Harness # TK22115 with the 7- and 4-Pole Trailer Connector Socket # HM40975. The connector will connect directly to the Tekonsha wiring. If you are going to need a brake controller check out the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness # RED63RR as it will plug directly into the harness included from Tekonsha.
  view full answer...


• Are Konig Tire Chains Left Or Right Side Specific
• Hi Louie, Great question, the Konig Tire Chains # TH01594250 are not left or right side specific and either chain will work on either side. These come with their own tensioning system so these will be ready right out of the bag without any additional components.
  view full answer...


• Can I Tow w/ the 2" Receiver on a Stealth Hitch for a 2021 Volvo XC90 Recharge?
• No, sorry you can not. The 2" receiver that comes with the Stealth Hitches item # SH27FRT can only be used for accessories like bike racks and cargo carriers. It's only been built to withstand the vertical force put it on by accessories. You'll have to use the included ball mount to tow. There's no other options or any way to do any height adjustments with the hitch. The Stealth Hitches item # SH27FRT has been confirmed to fit the 2021 Volvo XC90 Recharge. I have linked an installation...
  view full answer...


• Recommended Gen 3 Goosebox for a Lippert 1621 Pin Box
• No, not at all! You will be all good with the extra capacity. Since you have a Lippert 1621 pin box and you're looking to get a Gen 3 goosebox you will want the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item # RP85FR. You will also need the Reese Safety Chain Kit with Clevis Hooks item # RP49151. These are not included with the goose box but are legally required.
  view full answer...


• What Pin On My 7-Way Should Be Hot All The Time?
• Hello Otto. The 12v pin on your 7-way should be hot all the time, assuming it is wired directly to the vehicles battery. This would generally be the 1 o'clock pin. I have included the wiring diagram for a 7-way below for your reference. I am not quite sure what you mean by "tm pin" though so if you can provide more information, I am happy to provide you with a more detailed answer.
  view full answer...


• Truck and Trailer Is Still Sagging After Installing a Weight Distribution Hitch
• Sandra, what you're going to need to do is adjust the hitch to redistribute more of the weight to the front of the truck. I've included a video that shows how the hitch will redistribute the weight when installed properly and an instruction link showing how to adjust the hitch head which starts on page 14.
  view full answer...


• Replacement Idler Hubs For Boat Trailer With UFP Hub and 1.68 Grease Seals
• You are going to have to get the Grease Seal # 168255TB and replace the seal included with either the Easy Grease # AKIHUB-545-35-G-EZ-K or Standard Hub # AKIHUB-545-35-G-K. We do not have any hub kits which come with the 1.68" inner diameter seal as a kit currently. Both the hubs above are galvanized so they will last longer on your boat trailer since they are more corrosion resistant than a standard painted hub.
  view full answer...


• Option For Repositioning The 7-Way Plug Higher On a 2017 Kia Sedona To Prevent Dragging on Ground
• Thank you for the image, Jason. It looks like the best option for you is going to be relocating the 7-way to a No-Drill Mount Bracket # 18136. This mounting bracket will clamp around the cross tube and allow you to position the mounting plate included with the 7-Way # ETBC7 higher behind your receiver and much closer to the bottom of your rear fascia.
  view full answer...


• Torque Spec For MORryde U-Bolt Kit MR66ZR
• The torque spec for a1/2" U-bolt, like those that come with the MORryde U-Bolt Kit # MR66ZR is between 45 and 70 ft/lbs.
  view full answer...


• Are Keys Universal For The CLUB Tire Claw XL
• The keys are not universal for The CLUB Tire Claw XL Wheel Lock # WI491. The three keys you get are the only ones made, so it's extra important to keep track of where the spares are because duplicates are not offered by the manufacturer.
  view full answer...


• Will Carpod Walled Cargo Carrier with Lid Bounce Around and Hit Tow Vehicle When Folded Up
• Great question, Chuck! The 23x47 Carpod Walled Cargo Carrier w/ Lid # M2205-2201 comes with a cinch strap to keep the walls and the lid secured to the carrier when it's in the stowed and folded up position. If you jump to the 1 minute mark in the linked video you'll see how our team member secures all of this with the strap. If you're talking about the 23x47 Carpod Walled Cargo Carrier w/ Lid # M2200-2201, this system is a fixed carrier so it can't be folded up against the tow vehicle....
  view full answer...


• Installing A Drive Wireless RV Backup Camera System On A 2024 Rockwood Geo Pro 20FBS
• Hi Matt, The Drive Wireless RV Backup Camera System # 324-000002 would not be compatible with the Furrion mount on the back of your trailer so you'd have to remove it and screw the included mounting bracket to the wall of the trailer. You'd also likely have a hole, or multiple, to fill from the old bracket so I recommend picking up some gasket maker to prevent any water from getting in. The PWM wiring issue is more so with the truck and not the trailer or camera. Essentially the truck...
  view full answer...


• Demco Air Force One Compatibility With A 2022 Newmar Dutch Star On A Spartan K2 Chassis
• Hi Scott, As long as your motorhome has the 'Spartan Safe Haul' system the Demco Air Force One Flat Tow Brake System for Spartan K2 400 Chassis RVs with Safe Haul # DM54YV would be compatible with the factory air lines on the motorhome. From what I'm reading every Spartan chassis from 2019 and newer should come with the Safe Haul system installed, but it never hurts to verify. If you haven't picked out the rest of your flat towing components then I have the following recommendations...
  view full answer...


• Recommended Gen-Y Gooseneck Pin Box
• Hey Danny I would be happy to help you! Unless your 2015 Sandstorm 5th wheel trailer has a Lippert Rhino Pin Box which says Rhino Box on the side I am going to need to see the sticker on your pin box. It'll have some of the following or all; a serial number, RPO number, LCI number and some other information on capacity. If you could email me this directly I would be happy to find the right Gen-Y Gooseneck Pin Box for you. Now, if you have a Rhino Box you'll need the Gen-Y Hitch 5th Wheel...
  view full answer...


• Plug & Play Harness For Prodigy P3 Brake Controller on 2015 Chevy Silverado 1500
• Hey Chad, A plug-and-play wiring harness is not included, though you can get one for your 2015 Chevy Silverado and the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. All you need is the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3016.
  view full answer...


• Blue Ox Baseplate For A 2024 Ford Bronco
• Hi Cliff, Yes, the Blue Ox Base Plate Kit # BLU23XR is part number BX2692 and would be a fit for your 2024 Ford Bronco whether you have the Performance Heavy Duty Modular Bumper or standard plastic bumper. If you haven't picked out the rest of your flat towing components then I have the following recommendations: Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables included as well as an adjustable head to help keep it level between...
  view full answer...


• SeeLeveL Monitor and Sensors For a 2020 Jayco 310RLTS With Multiple Grey Tanks
• You are going to need a different monitoring panel for the SeeLeveL sensors since your current probe style sensors like the # T21301VP are only going to show open and close readings since each tank will have multiple sensors. You will want to use the Monitor # SE57VR since you have 2 grey tanks. I have included a list of the different height sensors we offer that are compatible with this monitor. 9" Sensor # SE88VR 12" Sensor # SE78VR 16" Sensor # SE27VR
  view full answer...


• Does The Saris Door County Bike Rack # SAR42RR Fit All 2" Trailer Hitch Receivers
• Hi David, The Saris Door County Bike Rack for 2 Electric Bikes # SAR42RR does require a 2" trailer hitch receiver tube opening in order to mount. Hitch pin holes for a 2" hitch are typically 5/8" in diameter. The anti-rattle hitch pin lock # SA3022 included with this rack has a 7/16" thickness and threads into the shank of the rack to clamp it to the receiver tube and prevent any movement/rattling. As long as you have a 2" trailer hitch receiver you'll be able to use the Saris Doo County...
  view full answer...


• Does Replacement Rear Bow for Extang Fulltilt Have Plastic End Pieces
• Hey Rick, yes the Replacement Rear Bow for Extang FullTilt SL Soft Tonneau Cover # EX38410-14 does include the plastic pieces you mentioned.
  view full answer...