Expert Answers about Ford Ranger
- Adapter for Valley Tow Bar to Blue Ox Base Plate on 2019 Ford Ranger
- There is an adapter that will allow you to use your Valley tow bar with your 2019 Ford Ranger and the Blue Ox Base Plate Kit # BX2679.
The correct part for this is the Blue Ox Base Plates to Reese, Valley or Draw-Tite Tow Bar Adapter Kit # BX8833.
I have added a link to a video review of the adapter for you to check out as well. Additionally, if you need the rest of the flat towing setup for your 2019 Ranger, the correct parts are as follows:
- Safety Chains: Blue Ox Safety Cables #...
view full answer... - Demco Base Plate Compatibility With A 2021 Ford Ranger 4x4
- The Demco Tabless Base Plate Kit - Removable Arms # DM9519343 fits all models of the 2021 Ford Ranger. According to the online manual only the 4WD models are able to be flat towed so you will have no issues installing the # DM9519343 and flat towing your 2021 Ford Ranger 4x4.
If you haven't already purchased your tow bar, tow bar wiring kit, braking system, and safety cables then I have the following recommendations for you below:
Tow Bar: etrailer SD Non-Binding Tow Bar # e34ZR. This...
view full answer... - Wiring Diagram For All In One Connector From Brake Buddy Stealth System
- One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part # HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the all-in-one connector on the Ford Ranger. I have attached a wiring diagram for the all in one connector for your reference.
view full answer... - Does Curt 7-Way Wiring Harness Fit 2019 Ford Ranger
- The Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56431 will absolutely fit the connector you have on your 2019 Ford Ranger.
If you take a look at your photo as well as the accompanying photo I added from the install video of this harness on a Ford Ranger, you can see the connectors are exactly the same.
I do recommend checking out the linked video install of the Wiring Harness # C56431 so you can see how easy it is.
I also strongly recommend using Dielectric...
view full answer... - Can the Bumper Mounted Trailer Hitch be Installed Under the Step Bumper of a 2000 Ford Ranger
- I spoke with my contact at Curt, the manufacturer, about the Bumper Mounted Hitch, # E-3S, and the compatibility with your 2000 Ford Ranger. He stated that the total width, side to side, is just under 14 inches. From the front of the receiver opening to the back of the plate is 6 inches. The plate itself measures 4 inches front to back.
The hitch can be mounted under the step bumper if you have mounting holes that measure 8-3/4 inches from center to center on your bumper.
view full answer... - Fit of Curt Class II Hitch on 2004 Ranger XLT with Flare Sided Bed
- The Curt Class II Trailer Hitch, part # 12012 mounts to the frame members under the rear of the bed. The frame members would be the same for that model year, regardless of the bed. You should have no fit issues with this hitch.
Keep in mind that Curt does say to use a stabilizing strap # 18050 when using this hitch to carry non-trailer loads in order to comply with the warranty.
Although the Curt is a great hitch, I recommend that my customers go with the Class III hitch when the option...
view full answer... - Which Westin Fey Diamondstep Rear Bumper for a 1990 Ford Ranger
- I have a solution for you but the Westin Fey # 63000 and # 92240 are not a confirm fit on the 1990 Ford Ranger; I will also say that I'm not quite sure if by "displacement" you're referring to the difference that you're seeing with your measurements and the bend in the brackets. With all of that said I think the difference you're seeing is down to the Westin Fey Diamondstep # 63000 and custom installation kit # 92240 not being a confirmed fit on the 1990 Ranger.
Instead, the correct kit...
view full answer... - Recommended Black Replacement Rear Bumper For A 2004 Ford Ranger Edge Flareside
- For a 2004 Ford Ranger Edge flareside you'll need the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel # 66000-97200.
view full answer... - Will The Lock N Roll Articulating Coupler # 336TS504 Fit a 2021 Forest River No Boundaries 10.6?
- Yes, the Lock N Roll Articulating Coupler # 336TS504 will fit as a replacement for the standard coupler on your 2021 Forest River No Boundaries 10.6. You will of course also need the Lock N Roll Articulating Hitch # 336VS503505 for your receiver to then tow your trailer.
view full answer... - Trailer Wiring Solution for 1996 Ford Ranger with Separate Turn Signs from Stop Lights
- The trailer wiring kits we offer for your 1996 Ford Ranger like the Hopkins part # 40215 were designed for the type of taillights that your truck has where the turn signals are separate from the stop lights. This kit combines the circuits onto the same wire which matches what trailer wiring has.
view full answer... - Trailer Hitch Confirmed to Fit a 2023 Ford Ranger
- Yes, there is an option for your 2023 Ford Ranger.
- etrailer Trailer Hitch Receiver # e63ZR
This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also has a nice matter black finish.
view full answer... - LED Lights for 1991 Ranger Boat Trailer
- We can get you all the lights you need though it will come in the form of different parts because there isn't a specific "kit" containing everything.
For the stop/turn/tail lights you can use the GloLight LED Trailer Tail Light # STL178RFPB; this is a surface mounted light that is 7-1/2" wide x 3-5/16" tall x 1-1/8" deep and has an industry-standard 3-prong plug to connect to your trailer. Then for your clearance lights you can use # MCL-91AK, which is amber and measures 2-1/2" x 1-3/16"...
view full answer... - Custom Fit Towing Mirrors for a 2003 Ford Ranger
- Longview custom towing mirrors # CTM2200A are listed as a fit for a 2003 Ford Ranger. This is currently the only custom fit towing mirror set we have for the 2003 Ford Ranger. I have linked a video showing an example installation for you.
view full answer... - Air Lift Air Bag Helper Springs and Compressor For a 2002 Ford Ranger XLT Super Cab 4X4
- Yes, the Air Lift Ride Control Air Helper Springs # AL59516 will fit your 2002 Ford Ranger XLT super cab 4x4 with the 4.0L V6 and 5 speed automatic transmission.
I recommend using the Air Lift WirelessAIR Compressor System # AL58WQ with these air springs. This system utilizes a smart manifold which allows you to control the air pressure from your smart phone using the Air Lift app. This means you do not have to run air lines in your cab or carry a separate remote. The smart manifold will...
view full answer... - Correct Manual Adjust Dexter 3,500 lb Electric Brakes For Travel Trailer
- All of that information was very helpful, thank you, and we do have exactly what you are looking for with 3,500 lb Dexter manual adjust electric trailer brakes in the part number you mentioned; they are the following:
- Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27
The # 23-26-27 brakes include the mounting hardware, so the only thing you might need if you don't have one is an adjustment spoon, the Brake Adjustment Spoon # W80630.
view full answer... - 1992 Ford Ranger Regular Cab Nerf Bars
- The nerf bars for your 1992 Ford Ranger with the Regular Cab, the Westin Signature Series Round Nerf Bars - 3" - Black Powder Coated Steel # 25-0565, aren't available in chrome probably because you have an older vehicle that doesn't have as high of a demand as other nerf bars do. This is a decision that is made directly by Westin as they only have the black nerf bars for your vehicle.
If you're needing nerf bars then the black Signature 3 bars are the only ones designed to fit your vehicle.
view full answer... - Will The Thule TracRac Work With A BAKFlip MX4 Tonneau Cover On A 2020 Ford Ranger
- The Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XTB you were looking at clamps to the inner bedrail lip and would interfere with the mounting of the MX4 cover. We do however have a compatible fit for an MX4 with the TruXedo Elevate Truck Bed Rack System # TX86NV (5' bed) or # TX26NV (6' bed). The towers slide along a track and adjust from 18" tall to 28" tall so that you can easily fit a variety of needs.
view full answer... - Which Vehicles Will the # 89015 Hidden Hitch Receiver Fit
- The 89 Series Draw Tite Hitch Receiver # 89015 you have has been discontinued. The closest one made today is the Curt Trailer Hitch Receiver # 13540. The # 89015 fit the following vehicles:
1991-1994 Ford Explorer, All Styles
1995-2000 Ford Explorer, All Styles
2001 Ford Explorer, 2 Dr. Sport
2001 Ford Explorer, 4 Dr.
2002-2003 Ford Explorer 2 Dr. Sport
1991-1994 Mazda Navajo, All Styles
1997-2001 Mercury Mountaineer, All Styles
To order the replacement hardware, use part # RHK. Select...
view full answer... - Will Pilot Aluminum Universal Side Step Bar Fit 1998 Ford Ranger Regular Cab
- As long as you have access to the rocker panel then yes, the Pilot Aluminum Universal Side Step Bar # AS-400 will fit. This is a universal application and we haven't fit it directly to a '98 Ranger before but if you look on the product page we had a customer who actually fit it to their lawn mower so it truly is a universal step.
view full answer... - Availability of Rhino-Rack Roof Rack With Crossbars Longer Than 49 inches
- The correct Rhino-Rack crossbars that are confirmed to fit your 2004 Ford Ranger are the 49 inch ones that come with the Rhino-Rack bars # RRVA126B-2, 2500 Series Legs # RRRLKVA, and Fit Kit # DK191. The way that these specific crossbars are designed will not allow you to use a longer option due to the limited channel length on the bottom side of the crossbars.
For a Rhino-Rack roof rack option that will allow you to fit longer crossbars to it you will need to go with the 2500 Series Legs...
view full answer...
Go To Results