LED Lights for 1991 Ranger Boat Trailer
Question:
Looking for a complete LED submersible wiring kit for my 1991 ranger bass boat trailer. the kit would include 2 amber and one red LED on each side and sort of oval red brake/turn/tail lights and 2 small red rear lights as seen in the attached photos.. Which kit should I consider?
asked by: Jim L
Expert Reply:
We can get you all the lights you need though it will come in the form of different parts because there isn't a specific "kit" containing everything.
For the stop/turn/tail lights you can use the GloLight LED Trailer Tail Light # STL178RFPB; this is a surface mounted light that is 7-1/2" wide x 3-5/16" tall x 1-1/8" deep and has an industry-standard 3-prong plug to connect to your trailer. Then for your clearance lights you can use # MCL-91AK, which is amber and measures 2-1/2" x 1-3/16" x 7/8" with mounting holes that are 2" apart on center. The same light is available in red as well with # MCL-91RK.
Products Referenced in This Question
ThinLine Mini LED Side Marker or Clearance Light w/ Bracket - Submersible - 3 DIodes - Amber Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 2-1/2L x 1-3/16W Inch
- Amber
- Optronics
more information >
Thinline LED Clearance and Side Marker Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 2-1/2L x 1W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 7-1/2L x 3-5/16W Inch
- Red
- Optronics
more information >
Continue Researching
- Search Results: trailer lights
- Q&A: Method of Bulb Replacement on Oval Red Grommet-Mount Trailer Taillight
- Search Results: interior trailer lights
- Search Results: ramp door weather stripping
- Video: Optronics Trailer Lights - Clearance Lights - AL191AB Review
- Video: Optronics Trailer Lights - Tail Lights - BUL111CB Review
- Video: Optronics Trailer Lights A70GB Review
- Video: Review of Peterson Trailer Lights - Interior Lights - 359-2
- Video: Optronics Sealed Thin Line Two-Bulb Trailer Clearance Light Installation
- Video: Optronics Mini Thin Line Sealed LED Review
- Video: Optronics Sealed Thin Line LED Trailer Clearance Marker Light Installation
- Shop: Thinline LED Clearance and Side Marker Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens
- Shop: ThinLine Mini LED Side Marker or Clearance Light w/ Bracket - Submersible - 3 DIodes - Amber Lens
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: LED Identification Light Bar for Trailers over 80" Wide - Submersible - 9 Diodes - Red Lens
- Shop: 3-Wire Pigtail for Trailer Tail Lights - 3-Prong PL-3 Plug
- Shop: Ramp Gate Seal Kit for Enclosed Trailer Ramp - Half Round Seal - 35' Long x 9/16" Tall
- Shop: Peterson Great White LED Trailer Interior Cove Light - 400 Lumens - 12" Long - 12V/24V
- Q&A: Trailer Light Kit Recommendation for Ranger Boat Trailer
- Q&A: Which Wiring Harness Will Be Needed to Install the Optronics GloLight LED Trailer Light STL178RFPB
- Q&A: Comparing Bargman Heavy Duty 7-Way Trailer Connector # 54006-057 to # 54006-009
- Q&A: GloLight LED Tail Light Compatibility with 2018 Coachmen Clipper ST108
- Q&A: Parts Needed to Install GloLight LED Trailer Tail Light # STL178RFPB to Trailer Wiring
- Q&A: Replacement Light for Optronics ST70RBTK Trailer Tail Light with Mounting Bracket
- Shop: Trailer Wiring
- Search Results: trailer light kit
- Search Results: lights