In order to determine if there is space for both a slide topper and standard awning on your 2020 Grand Design Reflection 303RLS you will need to have at least 3" from the inside of the flange on the side of the slide to the outside of the mounting bracket for the awning arms and 6" from the outside edge of the top flange to the top of the bracket for the awning arms. If you have the above space then you can install a Solera RV Slide-Out Awning, just let me know what length your slide is... view full answer...
The SnapPad Jack Stand Pads for Class A Motorhome part # SP34FR74 comes with 2 pads which fit an 8" diameter foot and two pads which fit an 11-1/2" diameter foot. If you need just the pads for an 8" diameter foot then we have the Replacement Pad for SnapPad Jack Stand Pad System part # SP34FR. view full answer...
While the Gen-Y sway control arm you asked about has been discontinued for a number of years, I can tell you that with sway control systems like it and the Curt Friction Sway Control Kit # 17200, you definitely do not want to use them in slick conditions like icy or wet roads.
The reason is because slick conditions can make the trailer slide more - mostly on turns - and this can cause excessive understeer and your wheels to spin and your truck and trailer losing control (the specific... view full answer...
I strongly recommend a sliding 5th wheel trailer hitch for your 2017 Ford F-350 short bed as opposed to the Andersen Ultimate Connection 5th Wheel Trailer Hitch System # AM3200. While technically you can use the Andersen, a sharp turn is likely to result in your Keystone Raptor crashing into the back of your cab.
It is much safer to use a sliding hitch, and while it may cost a bit more now, it will be much less expensive than having to repair your F-350's cab as well as your Raptor from... view full answer...
I'm not sure why it would be said that the Under-Bed Rail and Installation Kit # RP87FR doesn't fit a 2019 Ford F-350 Dually. I reached out to my contact at Reese who confirmed that this rail kit is compatible with a '19 F-350 Dually so you are good to go!
If you don't already have a 5th wheel hitch then I recommend using the B&W Companion because it is made in the USA, has 1" thick dual jaws and a cushioned head for a smooth towing experience, plus (and best of all) it features a cam-action... view full answer...
There is an adapter for the puck system on your 2016 Ford F-350 Super Duty that will allow you to mount the B&W Patriot 5th Wheel Trailer Hitch # BWRVK3255 or the B&W Patriot 5th Wheel Trailer Hitch with Slider # BWRVK3270.
What you will need for your Ford to mount a Patriot hitch is an adapter from Demco, with the correct part being the following:
- Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package # DM6175
The # DM6175 adapter will mount directly into your truck's... view full answer...
I have another option but there is not a Valterra shut off valve that has the camlock connector already installed to work with the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 you were looking at.
Instead If your current shut off valve has a 3" bayonet spigot like the Valterra Double RV Waste Valves # TR38B you will need to cut the lugs off of the valve, use sand paper to smooth out the surface, and then use Valterra ABS Solvent Cement # A05-0303... view full answer...
If you want the OEM ladder you'll need to contact the manufacturer, since we only carry universal ladders.
If they can't get you one or the wait is too long then you can install a universal ladder like the Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401BA. I've attached a video below where I'll walk you through the installation process. view full answer...
Yes, your Equal-i-zer weight distribution (WD) system that fits your 2" receiver, like part # EQ37120ET, will fit the Equal-i-zer WD Shank # EQ90-02-4900 so that you don't need an adapter. This shank actually has a bit of a taper towards where it connects to the WD system which makes it compatible. view full answer...
Due to space constraints on your 2019 Ford F-350 Super Duty I recommend using a portable compressor, the Bulldog Winch Compressor # BDW41000, which will give you the ability to inflate your tires without having to take up the limited space you have on your F-350. This compressor will use your truck's battery for power and is rated for up to 150 psi which will meet your needs.
The compressor has a 5.65 cubic feet per minute of air output which will get the job done quickly. It has a 26'... view full answer...
You can get the B & W Companion part # BWRVK3300 and the Reese Sidewinder part # RP34FR to help with clearance when towing the Bighorn with your 2019 Ford F-350 Super Duty With OEM Prep Package. The Sidewinder does not work with the B & W Companions that fit into the Gooseneck hole but since the BWRVK3300 uses the 4 attachments points instead of the single center attachment point it is compatible with the Sidewinder.
The Sidewinder part # RP61420 replaces the Lippert 1621HD pin box on... view full answer...
I do have a solution for you, but the Curt X5 # C16210 is designed for Curt Double Lock Gooseneck Trailer Hitches which have an existing slide bar that locks the gooseneck hitch ball in place. Since the Curt Gooseneck Hitch # C60700 is designed for a self-locking hitch ball, like part # C60629, it means that the Curt gooseneck isn't compatible with the X5.
The only gooseneck hitch that fits your 2019 Ford F-350 Dually that you can use with an adapter is the B&W Turnoverball Underbed Gooseneck... view full answer...
We do have a set of air bags that will fit your 2020 Ford F-350 Dually with the in-bed hitch. As long as you have 7-1/2" from the outside of the frame to the inside of the tire you can use the Firestone Ride-Rite Air Helper Springs part # F35FV.
In addition to the air bag kit I recommend installing the Air Command Compressor System w/ Wireless Remote # F96VV so that you can adjust and monitor your air bags from the comfort of your cab wherever you are. This keeps you from having to keep... view full answer...
The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box part # 325-GH-8045 can indeed be made compatible with a Lippert 1116 Pin Box. That said, the above adapter is 12" wide and your pin box is 12-1/2" wide so you need 1/4" spacers to fill the gap. There is an exact spacer for this job but we do not carry it so you will need to reach out to Gen-Y for this, the ΒΌ" Filler Shims for EXECUTIVE 12.5" Wide part GH-8000. view full answer...
The # DM6077 that you looked at is actually just the replacement head and base assembly for the 18 Demco Hijacker Autoslide hitches. That's only part of the hitch you have in your 2013 Ford F-350. The complete hitch is part # DM8550024.
The good news it that # DM8550024 fits your 2020 F-350 as well because the puck systems are the same for both model years.
The new truck likely has wiring in the bed already but if not I recommend part # 50-97-410-010. The hardware is aluminum so it's... view full answer...
The Timbren Silent Ride Suspension # TSR14KT01 is perfect for your application! It is meant to be used with 7K tandem 3" round axles and it works with any kind of braking system. You will be really happy with the improvement of the ride for your 2018 Open Range 5th wheel plus these make your suspension maintenance free since there are no wet bolts that need to be greased or leaf springs that need to be checked on. view full answer...
I contacted EcoHitch about the EcoHitch Hidden Front Mount Trailer Hitch Receiver part # 306-X7904 and it is indeed confirmed to fit your 2019 Ford F-350 with the diesel engine. This hitch was redesigned to allow it to work with both gasoline and diesel engines.
I included a video of this hitch being installed on a similar 2021 Ford F-350 for you to take a look at. view full answer...
Yes, the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501410 will work great on your 2018 Ford F-350 with the long (8 foot) bed. This particular system is long enough that it fits both the 6-3/4 foot and 8 foot bed models of your F-350 and the uprights can be moved along the side rails to accommodate the different lengths.
I have attached a short video review and the written installation manual below that you can also check out. view full answer...
The hitch opening at the end of the TorkLift Cannon Hitch Extension # TLE1636 is a 2-1/2 inch hitch with an optional sleeve reducer that brings it down to 2 inch. Basically all hitch extenders like this take and reduce the hitch size down to the next smallest size so while there isn't a solution that's exactly what you are looking for you could go with a 2.5 inch hitch Tow and Stow like part # BWTS20040C and you'd be set. view full answer...
There is a flat towing wiring harness for your 2019 Ford F-350 Super Duty, but the Hopkins one you mentioned is not a fit; it is only a fit for certain model year F-150's.
There are no plug-in harnesses for your F-350 so I recommend a simple splice-in harness instead, the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. view full answer...
Go To Results