Since you are wanting to use LiFePO lithium batteries, you are correct that you would need to change the converter section of your power control center.
To change the converter section in your PD4560KL12L power control center to be lithium compatible, you can use the Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center # PD4560LICSV. view full answer...
Currently the Air Lift LoadLifter 5000 Air Helper Springs # AL57345 is the only kit available for the rear suspension on your 2012 Ford F-450 cab and chassis truck. There is not a 7,500lb kit available from Air Lift or Firestone available. To ensure the Air Lift will fit your box truck you will need to verify that there is at least 7-1/2" of clearance between your tires and the frame rail.
The Air Lift Load Controller Compressor System # AL25856 will allow you to control the air pressure... view full answer...
I have attached for you below a photo from the installation instructions of the Firestone Ride-Rite Air Helper Springs part # F2597 which is a fit for a 2014 Ford F-350. In this photo, you can see exactly how the brackets attach to the frame. The kit is designed to be used with a factory tanks so if you have an aftermarket one you will need to make the call if the air bags are compatible based on the photos.
If you can send photos and provide more info on which exact tank you have I may... view full answer...
We do have bushing kits for the OEM anti-sway bar on your Sea Breeze built on a 2005 Ford F-550 chassis, and the bushings include the brackets as well. There are different bushings depending on the diameter of your anti-sway bar, so you will need to measure it to ensure you get the right kit, and I'll list out the options for you:
- Rear 1-1/2" Diameter Bar: Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar # RM-4139-125
- Rear 1-3/8" Diameter Bar: Roadmaster... view full answer...
The B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3050 can attach to a B and W Gooseneck hitch that is installed in a standard truck bed like what you have but you should not this has a fixed height that is lower than usual at 10-1/2 inches. For a standard Companion hitch for your truck you'd most likely be better off with the # BWRVK3500. view full answer...
For motorized running boards that fit your 2006 Ford F-350 Crew Cab Diesel you need the Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights # AA3048324. The # AA3025179 you referenced is not a confirmed fit for your truck.
These running boards will provide you with the same 2nd step that deploys from the main housing. They also have integrated LED lights which will turn on when the 2nd step is deployed for improved visibility. These come with a limited... view full answer...
I called Roadmaster and confirmed that for a 2006 Gulf Stream Conquest BT Cruiser on a Ford E-450 Chassis the correct steering stabilizer and brackets would be the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR. view full answer...
The Swing Out Extension Brackets part # LC182496 which are for HappiJac Truck Camper Jacks will add approximately 3-1/2" - 4-1/2" of clearance to the existing jacks per side. This can then be used to determine compatibility. I would unfortunately not have any other brackets that offer more of an extension if that were needed. view full answer...
The Curt Class V 2 Inch Hitch # C15445 is listed to fit a 2011 Ford F-450 Cab and Chassis with 34 inch wide frame.
I am sending a link to the installation instructions of the Curt hitch.
If you will be needing a pintle hook mount with a long shank I would recommend the Tow Ready Pintle Hook Mount # 63059. This mount will have a shank length of 11-3/8 inches from the center of the hitch pin hole to the end of the shank.
You will also need the pintle hook and ball combo that will bolt... view full answer...
You will need to use a universal hitch like either the B&W Turnoverball # BWGNRK1500 or Buyers Gooseneck Plate # 3373014981 on your 2012 Ford F-350 cab and chassis. The aftermarket manufacturers do not build a gooseneck kit specific to the cab and chassis as they are typically covered with either a flat bed, service bed or other aftermarket bed which all have different heights off the frame an are made from different materials.
The B&W is a great option as it allow for versatility by... view full answer...
There unfortunately isn't a custom-fit kit confirmed to fit a 2005 Ford F-450 cab/chassis so you would have to have a fabricator weld on the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500 in order to get a gooseneck hitch that can also accommodate a 5th wheel hitch. For the hitch you would need the B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W, due to B&W's square tube design. view full answer...
The closest we carry to your needed dimensions and design is the Namsco Wheel Liners - 19-1/2" x 6", 8-Lug Dually - 5 HH - Front/Rear # NA7196F0J. view full answer...
Based on the information you have provided, I see no reason why the Hopkins 7 Way Blade to 7 Way Round Adapter # 47595 would not work.
Another option would be to remove the 7-way round pin connector from your camper and replacing it with the Hopkins Endurance 7-Way Trailer Connect # HM48500. The mounting bracket, hardware, and grease packet are included and I have provided a link to the installation instructions for this product as well.
Regarding your question about a cover for your... view full answer...
To replace the missing lug nut covers on your Namsco Wheel Cover # NA7160B1 you'll need the Lug Nut Covers for Wheel Masters and Namsco Wheel Covers # WM9003-4. These covers will just snap into place give your Namsco wheel covers a finished look. view full answer...
The rooftop condenser unit will have a tag on it under the shroud which will give you the model/serial numbers of the system. If you're looking to replace just the rooftop unit and still keep your air distribution box and thermostat then I recommend the swapping it out with an Advent Air unit;
Advent Air Replacement RV Air Conditioner for Coleman Setup w/ Start Capacitor - 13,500 Btu - White # ACCOL135.
Advent Air Replacement RV Air Conditioner for Coleman Setup w/ Start Capacitor -... view full answer...
The TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLF1003-30 is designed to fit a cab and chassis version of the 2006 Ford F-350. If you have the factory bed on your 2006 Ford F-350 then you will want to use the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLF1002-30 instead.
In regards to the tech tip on the cab and chassis, the hitch will line up with the frame rails assuming they measures 34" from the outside edge of each rail. However, you "may" need to remove... view full answer...
You can upgrade to a beefier hitch on your 2002 Minnie Winnie with the Curt Adjustable Width Trailer Hitch Receiver, # C13702, as long as the frame of your Winnie is 18 inches to 51 inches wide. It is a Class III-rated hitch with a maximum tongue weight of 500 lbs and max gross trailer weight of 5,000 lbs. And though the hitch is capable of pulling that much weight, that does not necessarily mean your motorhome can. You will need to check your owner's manual to figure out the amount of... view full answer...
If you have a true underbed folding gooseneck ball, the Demco Recon # DM8550045 is a perfect choice for towing a 5th wheel on your 2008 F-550 Flatbed truck. This system is especially nice because of its light weight, which provides for easier installation/take out compared to most other 5th wheel hitches. The single jaw construction provides 360 degree jaw to kingpin contact for a secure connection and provides less rattle than most dual jaw hitches on the market. view full answer...
I do have an option for you but we do not offer a custom fit trailer hitch for the Ford E-Series Cab & Chassis therefore the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 will not work as it is actually for the Ford F-Series Cab & Chassis. That said, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41991-16 has the weight capacity you need and it can be made to fit your Ford E-Series Cab & Chassis as it is universal/adjustable. view full answer...
There are two Timbren Rear Suspension Enhancement Systems for a 2001 Ford F-350, part # TFR350SDF for standard models or part # TFRTT350F for service models. If you have a cab and chassis I recommend the latter as they will be better suited for this application. view full answer...
Go To Results