The Replacement Rubber Bumper for Reese Fifth Wheel Trailer Hitch, part # 30536, attaches to the head with a screw that gets pressed down through the top of it and then is attached on the underside of the head with a nut.
I have provided links to the installation instructions for this item as well as a video showing how it is put together. You can see the installation of the bumpers at the 1:35 minute mark of the video.
If you needed the screw and nut you could get a Replacement Fifth... view full answer...
We do have a 5th wheel/gooseneck trailer wiring harness for the 2001 Ford F-250 Super Duty with the factory tow package. You can use # C56070. This same harness also fits some Chevy, GM, Dodge, and Toyota vehicles. The video I have linked shows it being installed on a 2014 but installation will be very similar on your truck. view full answer...
I would look into Titan Chain Snow Tire Chains with Cams # TC2221CAM; these are confirmed to fit 245/75-16 tires. These chains are easy to install and have built-in cams to keep the chains tight on your tires. view full answer...
The Reese Elite Series 5th Wheel Trailer Hitch # RP30871 is a custom fit part designed to fit with the OEM installed puck system on 2011 and newer Ford Super Duty. Currently we do not have a kit to retrofit your 2007 Super Duty. view full answer...
We have 2 hitches that might work depending on the specific measurements of your 1989 International. Curt hitches 15901 and 15902 are both weld-on hitches that will fit frames from 18 inches wide to 44 inches wide. The 15901 has a 5 inch drop. The 15902 has a 13-1/2 inch drop. I am not certain if the hitch itself, being 44 inches wide, will interfere with anything else under the vehicle (seeing as it is 10 inches wider than your frame rails). So you will need to check and see if clearance... view full answer...
You have the 7-way at the back bumper, as well as one installed in the bed, but you don't have the wiring connecting the two, is that correct?
We don't offer the wiring harness only, you'll need to use the # 40167 you referred to. You can simply use the wiring harness, one end will T into the vehicle wiring behind the connector on the rear bumper as shown in the video I've linked you to, and the other would plug into the existing connector in the bed. You can either replace the existing... view full answer...
For the 1996 Ford F250, we offer a tailgate by Stromberg Carlson, part # VG-100 that's a fit.
The Husky Liners tailgate you referenced fits F250 trucks back through 1999, but not a 1996 model. view full answer...
All performance tuners/monitors offered for your 6.4L V8 2008 Ford F-250 turbocharged diesel are shown on the linked page, and the Edge EvoHT2 Hand-Held Performance Tuner # EP16040 is among them. According to my technical contact at Edge your engine can gain up to 80 more horsepower and up to 200-lb-ft of additional torque when you select the performance towing tune.
This tuner does not affect/disable the truck's fuel management system (which shuts down some cylinders for efficiency).... view full answer...
The back louvered/grate panel is not available as a separate piece. We do have the bug screen # FVU1550WH available separately but the piece you are describing is only available with the entire cover # FVU1500WH. view full answer...
Good news! The under-bed kit for your 2013 Ford F-350 short bed is the # RP30126.
If you did not also snag the gooseneck assembly top plate then you will need to purchase the # RP30138 to complete the setup.
Together they are part # RP30138-26, which you had referenced.
I have linked all the above mentioned products and their individual costs to this page for your viewing and purchasing convenience. view full answer...
To install your Hopkins Brake Controller # HM47294 in your 2003 Ford F-350 Super Duty you'll use Pigtail Wiring Adapter # 3035-S. This will splice to the harness that came with the Insight using the included butt connectors. You'll splice the wires together color for color. Please refer to the linked video for more on this controller installation in a Ford Super Duty. view full answer...
We offer running boards from several manufacturers that will fit your 2005 Ford F-350 with Crew Cab. Products from Bestop, Dee Zee, Rampage and Westin can be seen by clicking on the link provided for you.
The available running boards are offered in various finishes including black, black with silver trim, chrome and matte finish aluminum, among others. You also have a choice of widths, ranging from 4-inches up to 7-inches. You can even choose lighted steps such as the Westin's # 27-0025-1215... view full answer...
What you are going to need is the part # H20036 and then wire the blunt cut wire end to the part # PK11604.
We don't have the exact adapter you are looking for, but this should work well for you. view full answer...
If you already have the rails and hardware and just need brackets for your 2010 Ford F-250 long bed you can use # RP50082. This kit comes with the custom frame brackets and the hardware to attach them to the frame. But it does not include the hardware to attach the above bed rails to the brackets. If you need that hardware as well use # RP58430. view full answer...
Yes, there is a kit available that will plug into the factory harness and run up to the bed so you can connect your fifth wheel. You could use either the Draw-Tite part # C56000 or the Pollak part # PK11893-11932. view full answer...
If your truck has the OEM 7-way, it should have a round connector that plugs directly into the back of it. You can unplug the connector at that point, and then plug it into the 7-way of your choice, like the # 74682 you referred to, or the # HM40975 which is being used as the OEM trailer connector on the new Ford trucks. The square connector you speak of is usually a little further down the line, on the frame rail. view full answer...
Yes, we do offer a tailgate lift assist kit for your 2013 Ford F-350. You can use DeeZee Tailgate Assist # DZ43203 which is a custom-fit product made for your F-350. The Lift Assist installs without drilling using included hardware, as shown in the video I linked for you. view full answer...
Your B and W Patriot 5th wheel does offer a range of installation adjustments for its pivot arms that you will find on the linked product page for part # BWRVK3200. This hitch is also compatible with Sidewinder pin boxes.
Replacement Sidewinder pin boxes are best identified by the part number from the original. The Lippert 1621 is a popular unit and can be replaced by a Sidewinder or Air-Ride Sidewinder but the unit you referenced, part # RP61412, is not a fit to replace a Lippert 1621.... view full answer...
First, we need to find out how your truck is configured. The 4 inch lift kit will not be a problem as long as your truck has not been fitted with aftermarket springs with the lift kit. In this case I would recommend that you go with a set of Super Springs, see link. The Super Springs will be working at all times to prevent body roll and enhance the suspensions ability.
If your truck has dual gas tanks, some of the 1999 models still had this option, you will need to go with a shorter set... view full answer...
We offer the Dexstar 15 x 5 Mini Mod wheel in white, as part # AM20443, and in black as part # AM20440, but not in a silver finish. Silver-powder-coat finish is offered in other sizes: part # AM20363 is a 14 x 5-1/2-inch size and part # AM20537 is 15 x 6-inches. The silver powder coat is currently not offered in your size. view full answer...
Go To Results