The only 5th wheel hitch that we have that is compatible with your 1989 Ford F250 Super Cab 3/4 T 4x4 8 ft. bed with lift springs and uses below bed rails is the B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W.
If you mean Overload springs when you say lift springs then the correct below bed installation kit is the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1110-5W.
If you do not have Overload springs then the correct install kit is the Custom... view full answer...
Thank you for the photo! What you have there is a deep drop or "cowboy" bumper. So, for a 2 inch trailer hitch that is confirmed to fit your 1989 Ford F-250 XLT Lariat with the deep drop bumper, I recommend the Curt # C15511.
This 3-piece trailer hitch receiver is specially designed for heavy-duty towing. This is a multi fit hitch, so drilling is required to bolt it onto your truck's frame, but it will fit both 34 and 37-1/2 inch frames. It has a 15,000 lb towing capacity and a 1,500 lb... view full answer...
Yes if your camper is pre-wired for a Furrion camera system, then the:
-Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS05TASF will work perfect for you!
However, there should've been a plate or sticker on the camera housing on your trailer that will let you know that it is meant to be used with the Furrion Observation Camera.
Attached is an installation video for you to check out as well. view full answer...
Your 1988 Ford Hitch # C15300 has a Class V 2" hitch receiver. For a Class III, IV, and V trailer hitches, you will need to use a 5/8 inch diameter pin such as # e98881. If you are using this hitch with accessories and want an anti-rattle hitch lock, then # e99047 is a great option. view full answer...
You can use the Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter # 9480 with a 5th Airborne pin box as long as it is not a Sidewinder 5th Airborne pin box. So if you have # 5AB-E1621-610, which is a regular 5th Airborne pin box, it will work with # 9480.
You mentioned a Un-A-Goose hitch which I have not heard of. If it is a Hide-A-Goose hitch then 9480 will work. But if not then the Hi-Rise is not confirmed as a fit for other models. view full answer...
The Air Lift air spring kit part # AL88298 fits the 1991 Ford F-250 4WD models and will fit with fifth wheel rail brackets. If you check out the linked install instructions you can see a diagram that shows the kit installing with fifth wheel brackets to the outsides of the mounting hardware. view full answer...
Curt Class V hitch # C15300 is a confirmed fit on your 1987 Ford F-150. To help you determine if it will be compatible with your skid plate I went to our warehouse and took a measurement of the hitch to find out the distance from the mounting brackets (that bolt to the bottom of your frame rails) down to the center of the crosstube. This dimension you can compare to your frame-to-skid plate dimension to see if the hitch will clear it.
The photo I prepared for you shows that from the top... view full answer...
The Derale 20 Inch Race Fan, # D17420, has a 19-7/8 inch diameter so it will fit within your 22 inch shroud. One thing to keep in mind with this fan is that it is a race fan which means it will require you to remove your fan clutch as well. It is designed to pull more air as your engines RPMs increase and not to be regulated by a clutch.
Removing the factory clutch will effect the length of the spacer that you need. Once you have the clutch removed, you will want to measure from the water... view full answer...
The Curt TruTrack Weight Distribution System with Sway Control # C17500 will work well for your 1991 Ford F-150. The TruTrack # C17500 fits a 2 inch trailer hitch receiver and has a maximum gross towing weight rating of 10,000 pounds. This system comes with the adjustable shank and a 2-5/16 inch diameter chrome hitch ball.
When choosing a weight distribution system, it is important to keep the trailer's tongue weight in mind. The # C17500 is rated for use with trailers that have a tongue... view full answer...
There are a couple of things to consider to determine the correct under bed frame brackets for your 1991 Ford F-250 long bed.
When it comes to rails there are 2 basic types out there: 10-bolt and 4-bolt rails. The 10-bolt rails will have mounting holes on the side flanges of the rails. The 4-bolt rails will only have holes on the top, center parts of the rails.
If you have the 10-bolt rails then you would need installation kit # RP30439. If you have 4-bolt rails you will need installation... view full answer...
According to the installation instructions, see link, for Curt installation kit # C16100 or # C16200, it will fit Ford F-150 and F-250 trucks up through 1996 model years so that means it will fit your 1988 Ford F-250. And either kit will fit with 5th wheel trailer hitch # C16115. view full answer...
You can definitely add a gooseneck hitch to your 1985 Ford F-250 flatbed truck, it will simply require a gooseneck designed for that purpose. The hitch you will need is the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500.
This hitch should be about flush with the bed, as you can see by the accompanying photo that a customer sent in of the hitch installed on their flatbed. The hitch does need to be welded to the bed so it is possible you may not need to... view full answer...
We do not carry the Reico-Titan products so my research was more limited but after doing some research I was able to locate the installation instructions for the Reico-Titan Jacks. They have brackets listed specifically for the "C" clamp mounting style. I have included a picture from the installation instructions that shows how they attach.
The Replacement L-Bracket # LC182492 paired with the Replacement Flat Bracket # LC182494 is going to be more comparable to the bracket style used in... view full answer...
I do have a way for you to confirm fit of the Derale Fan Spacer Kit for Belt-Driven Fans part # D31551 but I do not have any way to do this for you. Therefore, you will need to make sure the pilot hole on your water pump uses an 8mm bolt and that you have the proper room within your fan shroud (see photo). If you can confirm the above two then yes, it will work for you. view full answer...
The cushion inside of the Convert-A-Ball cushioned ball mount # AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it gets. It would take more force to compress that cushion than to actuate the surge coupler.
Cushioned ball mount # AMSC4 has a 2-3/4 inch rise or 4 inch drop but there are other options if you need a different rise or drop to tow the trailer level:
#... view full answer...
Our hitches that fit your 1986 Ford F-350 like the Draw Tite # 41904 install by attaching to the bottom of the frame and not above it. This is a pretty standard way for a hitch to install and is not overly difficult or time consuming. view full answer...
The B&W Turnoverball Gooseneck Custom Installation Kit # BWGNRM1319 that you referenced is for a Ram 1500 so it isn't compatible with your 1989 Ford F-350. Instead you want part # BWGNRK1110 if you have the Overload Springs or part # BWGNRK1100 if you don't have the Overload Springs. Please note that neither of these will fit if you have a Cab and Chassis or your F-350 has a 34" frame.
Attached are some review videos and installation instructions for you to check out. view full answer...
I may have an option for you but Flex-A-Lite does not have a proper belt driven fan for the 1984 Ford F-250.
You will need Derale Thermal Fan Clutch part # D22052 and one of the following fans depending on how much space you have available.
17" Fan part # D17117
18" Fan part # D17118
19" Fan part # D17119
20" Fan part # D17120 view full answer...
I checked with DeeZee and verified that the Truck Bed Mat # DZ86645 you referenced is custom designed and confirmed to fit a 7th generation (1980-1986) Ford F-Series pickup as long as it has the 8 foot bed. As you mentioned in your question the exact bed dimensions differ a bit for the F-Series through the model years this mat is designed to fit but the differences simply haven't been enough to cause any type of issue with regards to it matching up to the size and contours of the bed surface.... view full answer...
All trailer hitches that fit your 1989 Ford F-350 are going to require drilling, and I also wanted to note that the Draw-Tite Ultra Frame Trailer Hitch # 41952 will not fit your truck; it is designed to fit mid-2010's Ram 3500-5500 cab and chassis.
All trailer hitches that do fir your '89 F-350 are going to require drilling, and for a hitch that fits your F-350, a heavy-duty option similar to the one you referenced is going to be from B&W, and will depend on if your '89 F-350 pick-up has... view full answer...
Go To Results