It will be simple to install a trailer brake controller in your 2017 Ford Edge that already has the required 4-pole wiring harness in place.
All you will need is the trailer brake controller itself, and I suggest the reliable Prodigy P2 # 90885, along with our controller installation kit # ETBC7. The kit includes the 7-way socket and all wiring and other parts needed to install the Prodigy.
Your vehicle trim level (SEL vs. Titanium) des not matter for this particular installation. An... view full answer...
The etrailer Trailer Hitch Receiver # e36RR is a great hitch for your 2022 Ford Edge. It has a matte black finish that blends in well with the matte fascia parts on your edge.
For a 4-way and 7-way you will need a combination of parts. First you will need a T-One Vehicle Wiring Harness. The # C73FR fits the Titanium trim and the # C89FR is for all other trim levels of your Edge. This will then connect to the Universal Installation Kit # ETBC7 giving you a 7-way and 4-way connector.
I... view full answer...
Your 2010 Ford Edge AWD must be flat towed or towed on a trailer, it cannot be dolly towed. You will need a Blue Ox Base Plate Kit # BX2190 to connect to the front of your Edge. This will allow you to flat tow your Edge with the Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. You may need a high-low adapter like the Roadmaster # RM-048-4 as you need to keep the bars within 3" of level between your Edge and 2022 Coachmen Leprechaun.
You will need the Hopkins Custom Tail Light Wiring Kit... view full answer...
According to what I've read in the owner's manual, your Edge can indeed be flat towed if the specific procedures listed in the manual are followed precisely.
To flat tow your Edge, hook up to the motorhome then press and hold the brake to the floor. Start the vehicle and shift into Neutral with the brake pedal still pressed then turn off the vehicle. On a keyless start equipped vehicle, push the keyless start button one to shut off. If the vehicle has an ignition key, turn the vehicle... view full answer...
Both Draw-Tite and Curt hitches are good quality products. While one given hitch fit may favor one brand over the other in total they both offer excellent products. Curt hitches can sometimes have a nicer powder coat finish, and since they are made in the USA they do offer that appeal.
Of the options available I suggest the Draw-Tite 2-inch Class III hitch # 75992 for its lower price and freedom from the Curt requirement of using a support strap with non-trailer loads like bike racks.... view full answer...
A great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # C57202 with the 4-pole bracket # 18144. The no-drill brackets include a ring clamp that secures to your hitch tube. view full answer...
Equal-i-Zer recommends to lube the friction surfaces regularly with the:
-Equal-i-zer High-Performance Lubricant # EQ91-00-4250 for your Equal-i-Zer WDS, like the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET.
Additionally, Equal-i-Zer mentions that some noise can be heard from the arm sliding along the L brackets. In this case, it's best NOT to use grease, but to use the Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems # EQ95-01-5150. view full answer...
We don't have the exact spacer block that would've been included with the # C13067 hitch but the # RP3022 comes very close. The block is a little narrower, and the hole is centered rather than being on one end. This means that the block may try to spin once the bolt is being tightened. If this happens, use an impact wrench. The impact wrench will spin fast enough to prevent the block from spinning. It might take a minute or so, but the bolt will tighten. You'd also need a few bolt leaders,... view full answer...
The correct base plate kit for towing your 2012 Ford Edge with Eco-Boost is the Roadmaster XL Base Plate Kit, # 4408-1, if your vehicle does not have Adaptive Cruise Control.
If your 2012 Edge does not have the Eco Boost option, but does have adaptive cruise control, then you would want # 524426-1.
If your 2012 Edge has both Adaptive Cruise Control and Eco-Boost, we do not have a base plate install kit that will work on your vehicle. I do not believe both options are available with the... view full answer...
To get a 5-way flat connector on your 2011 Ford Edge you are going to need to install the Tow Ready Custom Fit Vehicle Wiring # 118515 and then install a 4 Pole to 5 Pole Trailer Wiring Adapter # 20036.
The # 20036 will plug into the 4-way of the # 118515 and then you will run the blue wire to the reverse light circuit of your vehicle and you will have a fully functional 5-way. You might need a circuit tester like our # 3808 to find the correct wire to tap into. Check out the installation... view full answer...
A great solution for the bow and stern tie-downs on your 2015 Ford Edge are Malone Hood Loops # MPG308. You just close them under the hood and trunk of your Edge and then connect them to the canoe.
You mentioned a Yakima roof rack. If your Edge has a naked roof with no factory rails the parts needed for a Yakima rack are:
50 inch JetStream Cross Bars # Y00425
BaseLine Towers # Y28TR
Fit Kit # Y06102 and # Y06139
Then you can add the Yakima KeelOver # Y04069 to carry the canoe on the... view full answer...
Flat towing your Edge will require the following components: a tow bar, a quick-disconnect bar, vehicle base plates, safety cables, a light wiring system and a supplemental braking system. I have included several helpful FAQ articles concerning flat towing and the components required.
The Falcon 2 Tow Bar is manufactured by RoadMaster in several versions. It appears from your photo that you have part # RM-520. Instructions for this part are provided. Your photo shows that the tow bar you... view full answer...
Thank you for your purchase of the towing products for your 2018 Ford Edge!
To upgrade your T-One Wiring Kit # 118677 so it's compatible with the Curt Echo Brake Controller # C51180 you just need the 7-Way RV Upgrade Kit # ETBC7L which plugs into the T-One and then route the power wire to your battery.
I've attached a review video for you to check out! view full answer...
I would be happy to help you set up your 2021 Ford Edge to tow your jet ski. I recommend the Curt Trailer Hitch Receiver item # C13234. The hitch receiver will sit about a 1/2 inch higher from the ground compared to the similar Draw-Tite item # 75214 that is also available for your vehicle. I have attached a picture and a installation video so you can see what the final product looks like after installation.
For your wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness... view full answer...
I took a look at the online version of your owner's manual and it does say that a 2007 Ford Edge can be flat towed. Even though this is what I found it is always best practice to check your owner's manual to confirm this and to see specific instructions regarding the flat towing process.
There are 6 essentials when it comes to flat towing any vehicle: a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter.
For a... view full answer...
We carry several lighting options for the 2013 Ford Edge. I have included a link to them for you to view. A brake light relay may be required depending on the system you choose. A kit that bypasses the vehicle wiring like a magnetic kit # RM-2120 will not require a brake light relay. Any other system will require the brake light relay # RM-88400.
You will also want to consult the vehicle owners manual for additional information on flat towing the vehicle. In the research I did I found... view full answer...
We can help you with selecting and installing a trailer brake controller in your 2014 Ford Edge SEL with factory tow package. Since you already have a working 4-pole trailer connector you will just need the controller itself plus the # ETBC7 installation kit you referenced. Your 4-pole will plug right in to the 7-way included in the installation kit and establish the ground.
I recommend the Prodigy P2 proportional brake controller # 90885 from Tekonsha. This is among the most reliable... view full answer...
To install a wireless brake controller such as the Curt # C51180 Echo, all you'll need is a functional 4 pole trailer connector and the # ETBC7L install kit you'd looked at. The install kit includes the adapter to convert an existing 4 pole into a 7-way connector, as well as all the hardware, wire and the needed circuit breaker.
If you don't already have a 4-pole connector, you can add one using part # 118669.
I've linked to a video that outlines how the # ETBC7L kit works, as well as... view full answer...
According to the owner's manual of your 2017 Ford Edge the vehicle can be flat towed with a 2.7L V6 EcoBoost, though are a number of parts you will need in order to do this, starting with compatible base plates. The ones you need will depend on the model of your Edge; I recommend the Blue Ox # BX2667 if you have either the SE, SEL or Titanium model of Edge. If you have a Sport model, the base plates you need are going to depend on whether or not you have Active Cruise Control. Roadmaster... view full answer...
Yes, we do have a hitch for your 2022 Ford Edge Titanium. It is the Curt Trailer Hitch Receiver item # C78KR. This hitch is custom fit and bolts directly to your Ford's frame with included hardware.
For your wiring harness I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C73FR. This custom-fit T-One connector plugs into your Edge's wiring harness behind the rear tail lights.
To round out your towing setup I recommend the Curt Towing Starter... view full answer...
Go To Results