Jet Ski Towing Set up for a 2021 Ford Edge
Question:
I have a 2021 Ford Edge and I am wanting to tow my jet ski with it. I need a hitch and a wiring harness. I don't want a hitch that hangs down too much.
asked by: Caleb
Expert Reply:
I would be happy to help you set up your 2021 Ford Edge to tow your jet ski. I recommend the Curt Trailer Hitch Receiver item # C13234. The hitch receiver will sit about a 1/2 inch higher from the ground compared to the similar Draw-Tite item # 75214 that is also available for your vehicle. I have attached a picture and a installation video so you can see what the final product looks like after installation.
For your wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118805. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. It will provide you with a 4-flat vehicle connector to control your jet ski trailer's lights.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball, and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Article: How to Choose the Right Trailer Hitch Class
- Article: Car Camping Checklist
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Article: How to Use a Roof Rack (Like a Boss)
- Q&A: Magnetek Series 6300A Model 6332 Replacement Converter
- Q&A: Do Trailer Tires and Wheels Need to be Balanced
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Flat Towing Package for 2008-2011 Honda CR-V
- Article: Towing a Trailer? Let's Talk About Brake Controllers