There are 3 trailer hitch available for your 2011 Ford Edge, I have included a link to them below, but the 36447 hitch that you have referenced will only fit a 2007 model Ford Edge. Of the available trailer hitches that will fit, all but one of them are Class III trailer hitches with 2 inch receivers. You will actually have more accessory options with a Class III trailer hitch than you would with a smaller Class II or Class I hitch.
If a Class II, 1-1/4 inch hitch is required, you can... view full answer...
I spoke with my contact at Lippert regarding your existing motor/gearbox model 5973820. He stated that the correct replacement motor is the Lippert Components Kwikee Step Motor Replacement Kit # LC379608. This is a direct replacement for the motor that originally came with your assembly and will work perfectly with the existing control unit. For the gearbox you'd then want the part # LC379160 that you mentioned as well. view full answer...
The wiring harness that you need to tow a trailer with your 2017 Ford Edge SEL (or for any vehicle for that matter) will be different than the harness that you will need to be able to tow your Edge behind your motorhome.
The Hopkins Custom Tail Light Wiring Kit # HM56011 that you mentioned will not fit your Edge. Instead you need to use magnetic lights like the Pilot # NV-5164. Your battery does need to be disconnected which will require two 50 ohm, 10 watt resistors so that the taillight... view full answer...
We do offer 4-pole trailer wiring harness kits for your 2009 Ford Edge that will provide stop/turn/tail light functions to your trailer's lights. All available items are shown on the linked page.
Each of these installs in the same way by 1) plugging in at your Edge taillights and by 2) routing one single 12V power wire up to the engine compartment for connection to the battery. This is the only type of aftermarket harness offered for your car. Of the three I recommend the Tekonsha kit... view full answer...
The Yakima round bar roof rack we offer for your 2015 Ford Edge Sport with no existing rails or crossbars is composed of 5 parts, items # Y00409, # Y28TR, # Y03536, # Y06102 and # Y06139, which are the items you referenced.
All four Yakima roof racks for your 2015 Ford Edge are shown on the linked page. The BaseLine system with black bars consists of parts # Y00422, # Y28TR, # Y06102 and # Y06139. view full answer...
For your 2011 Ford Edge Sport, I recommend the Draw-Tite # 75728. This trailer hitch has a 2 inch receiver. No drilling or welding is required to install it on your Edge.
I have attached an installation video and the installation instructions for the trailer hitch for you. view full answer...
We do have a confirmed base plate fit for your 2015 Ford Edge. Blue Ox part # BX2667 will indeed fit the 2015 Ford Edge SEL as long as it is NOT the EcoBoost version.
Base plates are one of five components needed to safely and legally flat tow. The other items include a tow bar such as the Blue Ox Alpha # BX7380 (which includes the required safety cables), a lighting/wiring kit like # TLL21RK and a supplementary braking system like the Blue Ox Patriot # BLU37TR. The linked article will... view full answer...
Thule does have fairing products available for roof racks that come in different sizes, depending on the length of the crossbars on your vehicle's roof. The available fairing sizes are as follows:
52inches long # TH22WV
44 inches long # TH82WV
38 inches long # TH72WV
32 inches long # TH62WV
These are designed to mount to Thule crossbars on a roof rack and will work to deflect wind and drastically reduce noise and drag. We do not currently have fairing available that is designed to mount... view full answer...
Yes, the Thule Complete Crossroad Kit comes in two different versions one with the 58 inch load bar length and one with a 50 inch load bar length. 53 inch bars are not available with this kit.
If 50 inches is long enough for your vehicle then the Evo Raised Rail Feet # TH710401, 53" WingBar Evo Crossbars # TH711420, as well as locks # TH450400 is recommended for your vehicle so that the bars extend farther to the sides for easier gear loading.
The part your referenced has been discontinued... view full answer...
The Yakima roof rack you looked at, consisting of the JetStream # Y00426 60 inch crossbars, # Y28TR BaseLine Towers, # Y06102 and # Y06139 clip kits is compatible with your 2016 Ford Edge with the glass roof, according to Yakima. The feet will sit on the painted portion of the roof, not the glass so this is perfectly safe to use.
If you let me know what you're needing to use the roof rack for I can make some recommendations for you! view full answer...
The dealer might not offer it, but we have a hitch for the 2013 Ford Edge Sport model. I'd recommend going with the Draw-Tite Class III, part # 75728. Unlike the Curt C13067, the Draw-Tite model doesn't require that a safety strap like # 18050 be used for hitch mounted accessories like bike racks or cargo carriers.
If you'll be using the hitch for towing purposes, you'll also need a few other items to complete your towing system:
Trailer wiring harness, part # 118515
Ball mount kit, part... view full answer...
We do have roof racks that will be compatible with your 2010 Ford Edge, you can choose between a square bar or an aero-style crossbar. For the square crossbar, the rack would consist of the following parts:
Crossbar, part # RRVA137B-2
Leg kit, part # RRRLKVA
Vehicle Specific Fit Kit, part # DK228
Or for the Aero bar style that's from Thule:
WingBar 53 inch crossbar, part # TH711400 for silver or # TH711420 for black
Rapid Traverse Roof Rack Feet, part # TH480R
Vehicle Specific Fit Kit,... view full answer...
I definitely have a Thule roof rack kit that is compatible with the flush mount rails on your 2015 Ford Edge but in the recent past Thule overhauled their roof rack line so the newer fit kit for your Ford Edge won't be compatible with the AeroBlade crossbars and corresponding legs. For a complete new roof rack you need the following:
50" WingBar Evo Crossbars - # TH711320
Evo Flush Rail Feet - # TH710601
Fit Kit - # TH46RV
Lock Core Kit - # TH450400 (optional)
I really like the upgrades... view full answer...
I spoke with my contact at Reese and he said to get a 4-Way pivot head on your older Reese 14K fifth wheel slider you will need to replace both the head and the center support section.
You will need Reese Replacement Head with Crossmember, # RP30047A. This is both the replacement head and the crossmember head support and it will fit the slider legs from your older Reese 14K slider hitch. view full answer...
The best 3-bike trunk rack we offer for your 2017 Ford Edge is the Yakima Fullback 3 # Y02633. This rack uses a much wider mounting pad to distribute the weight of the bike and racks evenly and as long as you keep the bike rack mounting pad and the paint surface clean you won't have any damage. Also you need to stay under the weight capacity of this rack which is 35 lbs per bike.
If you plan on carrying any kidsd or alternative framed bikes without horizontal top tubes like you mentioned... view full answer...
Airlift does offer the Airlift 1000 Air Helper Springs in universal applications. So you might be able to find some air helper springs to fit your 2020 Ford Edge.
It does require you to take some dimensions of your coil spring to get the correct fit. Use the following few simple steps to match your ride up with the perfect custom application:
First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height of your coil spring, which will be from the upper... view full answer...
Yes, the Blue Ox Base Plate Kit with removable arms, # BX2673 is a confirmed fit for the 2018 Ford Edge Sport equipped with adaptive cruise control and shutters, but not the 2.0L EcoBoost.
To flat tow your 2018 Ford Edge Sport in addition to the base plate kit # BX2673, you will need some wiring items. I suggest the Blue Ox Tow Bar Wiring Kit with 4 Diodes, # BX8848. This connects your RV's tail, brake and turn signal lights to Ford Edge lighting system. The diodes prevent electrical... view full answer...
The Curt Trailer Hitch Receiver # C13234 is confirmed to fit the 2015 Ford Edge SE, SEL, Sport and Titanium trim levels.
The current availability is shown on our product page. Be sure to look at the In Stock number for what is currently available.
The Curt T-Connector Vehicle Wiring Harness # C56272 will give you a 4-way flat trailer connection on the SE and SEL trims.
The Curt T-Connector Vehicle Wiring Harness # C56292 will give you a 4-way flat trailer connection on the Sport and... view full answer...
A Weber Q1200 portable gas grille uses a disposable 14.1 or 16.4-ounce LP cylinder as a gas source. Such cylinders use a Male Disposable Cylinder Port, also called a throwaway fitting, a 1"-20 fitting, or a #600 fitting.
For a 6-foot hose with this fitting on one end and a male quick-disconnect on the other you can use part # 100476-72-MBS.
If you need another connector type please refer to the linked article that covers all types of propane fittings. view full answer...
We do have roof rack options for your 2015 Ford Edge! I really like the Thule WingBar Evo system because it looks sleek, is easy to install, and comes with a dual rubber insert for the top channel which makes it easier to install T-Slot accessories. Here are the parts you'll need:
53" WingBar Evo Crossbars - # TH711420
Evo Clamp Feet - # TH710501
Fit Kit - # TH145074
Lock Core Kit - # TH450400 (optional)
If you let me know what you plan on using this rack for I'd be more than happy to... view full answer...
Go To Results