Expert Answers about Entegra Coach
- Using Fulton Single Axle Trailer Fender # F008594-2 On A McClaine Galvanized Boat Trailer
- The Fulton Single Axle Trailer Fender # F008594-2 does have a 4-1/8" wide mounting bracket slot, so they will fit nicely with the 4" wide brackets on your McClaine trailer. The mounting holes on the fender are 3-3/4" apart though, so you would have to put a new hole in the current fender bracket, but as long as you are comfortable doing that it will work nicely. The Fulton Single Axle Trailer Fender # F008594-2 is 42-5/8" long overall and 12-3/4" tall so we would want to make sure that...
view full answer... - Will Firestone Ride-Rite Air Bags Fit With Demco Autoslide 5TH Wheel Hitch on 2019 F-150 5-1/2' Bed?
- If they installed your Demco Autoslide 5th Wheel Trailer Hitch # DM8550040 using the Demco Install Kit # DM8552028-71 on your 2019 Ford F-150 with the 5-1/2' bed you will be able to use Firestone Ride-Rite Air Helper Springs # F2582.
The other 5th wheel rail kits from Reese # RP56034-53 and Curt # C38ZV use custom fit mounting brackets which mount in the same place as the Firestone air bags and cannot be used together. If you have this style mounting bracket you will want to look at the...
view full answer... - Recommended Stealth Hitch for a 2021 BMW X5 M
- No, it will not but I have one that does. It is the Stealth Hitches item # SH22MR. This hitch has been confirmed to fit the 2021 BMW X5 M model. It comes with everything you'll need to tow a trailer or haul an accessory like a bike rack or cargo carrier.
view full answer... - Do K-Source Universal Towing Mirrors Fit 2024 Lexus RX350
- Thanks for the question Robert, and while it is likely the K-Source Universal Towing Mirrors # KS3891-2 fit your 2024 Lexus RX350, neither we or the manufacturer have test fit them yet, so I can't guarantee it. However, these do fit mirrors that measure between 4-1/2" and 11-1/2" tall, which is very likely what the mirrors on your Lexus measure, but you'll just want to verify that first.
view full answer... - Recommended Air Bags for a 2023 Nissan Titan XD
- No, they do not but I have a set that does. Instead you will want the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item # AL88229. These also have a 5,000 lbs load leveling capacity that will keep the rear end of your 2023 Nissan Titan from sagging while you are pulling a trailer.
I also recommend adding the Firestone Air Command item # F2610 to your truck. This onboard compressor will allow you to adjust the PSI in your air bags from your phone.
The Firestone Ride-Rite Air Helper...
view full answer... - Matching Trailer Wheels For A 2024 Chevy Colorado
- Hey Steve,
Out of the options we offer the Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel # AM28NR does look the closest to your Colorado's wheels. This is a 15" wheel with a 5 on 4-1/2" bolt pattern so you'll want to ensure that your current wheels match this sizing. If not then let me know what you have and I'd be happy to look for another version of this wheel that would be a fit.
view full answer... - Will the MaxTrax Flat Rack Mount Work With the Yakima SideBar
- Hey Danilo, the Maxtrax Flat Rack Mount for MKII Recovery Boards # MA52PR will work great with the Maxtrax Lite Recovery Boards # MA24ZV and the SideBar Rails for Yakima OverHaul HD and Outpost HD Truck Bed Racks # Y01153.
Since these mounts just install into t-tracks and the Yakima SideBar has integrated t-tracks so the two will be compatible. The only thing you'd need to make sure is that you have at least 35" of room for the boards to physically fit.
view full answer... - Can the Lipper Dual Rack Repair Kit Rails be Trimmed for Install
- Hey Mike, yes you are going to need to cut the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC84FR to fit your specific 35" application.
To answer your roller question, I'd say they're not uncommon to have but not super common either. Adding some # 295-000027 I think would be a nice addition to help the slide in and out.
view full answer... - Will Two Kaku Zulu Kayaks Fit Yakima Rack and Roll Trailer
- Yes, your two Kaku Zulu kayaks will fit the Yakima Rack and Roll Trailer # Y08107. You can strap them directly to the crossbars or use a carrier like the Malone MegaWing Fishing Kayak Roof Rack w/ Tie-Downs # MPG207.
view full answer... - Availability Of Foot Pad/Boot For The MORryde StepAbove RV Steps
- Hello Janet. That is actually a really good idea for a product. Unfortunately, MOrryde does not make any kind of rubber boot or cap to go on the feet of the steps. The idea is to protect the foot, keep them from getting scratched and increase friction, right?
I feel like coming up with your own rubberized protector would not be too hard. I have seen rubberized tape like "flex tape" at stores. I would cut a piece of that to fit the bottom and/or sides of the foot. This way the foot will...
view full answer... - Replacement Lug Nut for a 2008 Jayco Octane ZX TT Toy Hauler
- Hey William!
The DeeMaxx Trailer Wheel Lug Nut # DE93GR will fit the wheels on your 2008 Jayco Octane ZX TT Toy Hauler as long as they have a cone shape where the studs protrude through the wheel. This lug nut fits a standard 1/2" stud and has the standard 60-degree cone fitment so as long as that's what you have then you'll be good to go!
view full answer... - Will The Malone Fairing For Roof Racks Fit Factory Crossbars On A 2023 Ford Explorer
- Hey Frank,
The Malone Fairing for Roof Racks # MAL74SR brackets will be compatible with Ford factory crossbars and has a locking knob to adjust the angle of the fairing to fit different crossbar heights so you shouldn't have any issues. Both the knob and brackets are able to be tightened down for a snug fit.
view full answer... - Will Hellwig Adjustable Rear Anti-Sway Bar Fit 2024 GMC Sierra 3500 Dually
- Hi Mike; the # HE86XR will fit your 2024 Sierra 3500 dually but it is designed for vehicles with a 2"-4" lift. If your truck is at stock ride height the correct anti-sway bar is the Hellwig Adjustable Rear Anti-Sway Bar # HE66XR.
view full answer... - Does Fulton F2 Fully Enclosed Trailer Winch Have Adapter Plate for Mounting
- The Fulton F2 Fully Enclosed Trailer Winch # FW20000301 does not have any kind of adapter plate to allow you to mount it to a different bolt pattern. You will have to drill new holes if you want to use this winch. I attached a diagram below with the mounting bolt pattern.
view full answer... - Tie-Down Rails to Fit with a 2023 Ford F-150 Lomax Stance Hard Tonneau Cover
- Thanks for reaching out, Roy!
The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover # LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have the TS Rails # TH75FR you can use as an alternative.
These install alongside the Lomax tonneau cover so they are compatible together, and then it does come with custom-fit tie-downs, but if you find other products to fit in the slots you can use those...
view full answer... - Does Rhino-Rack Ski and Fishing Rod Carrier for Pioneer Platform Rack Fit Other Racks
- Hi Timothy,
It is highly likely you can use other racks with the Rhino-Rack Ski and Fishing Rod Carrier for Pioneer Platform Rack # RR572-43159.
There isn't a list or anything of the sort regarding the other overland racks it fits, but it just uses T-bolts to mount into the channels so your rack will have to have those. So long as the channels are at least 3/4" wide for the square T-bolt to mount, it'll fit.
view full answer... - Will the Yakima SkinnyWarrior Fit on a TruXedo Elevate Truck Bed Rack
- Hi Mike yes, the Yakima SkinnyWarrior # Y07014-16 will fit just fine on the TruXedo Elevate Truck Bed Rack System # TX96NV.
view full answer... - Reese Elite Series Underbed Rail Adapter Measurements
- I have attached the measurements for mounting on the Reese Elite Series Underbed Rail Adapter # RP30156 below. As long as your 5th wheel hitch fits industry standard rails it will fit this adapter.
view full answer... - Recommended 1 1 /4" Hitch Expander to Be Able to Use the Thule T2 Pro XT
- Hey Kenneth, so it looks like you should be able to use the Curt Trailer Hitch Receiver Adapter # C45770. This adapter would go into your 1 1/4" hitch and expand it to a 2" opening so you can use the Thule T2 Pro XTR Bike Rack for 2 Bikes # TH83JV.
Just be aware that whenever you use a hitch adapter like # C45770 you will lose approximately 50 percent of your hitches overall capacity.
view full answer... - Can PullRite SuperGlide Mount to B&W 5th Wheel Base Rails
- Hi H.L.
There isn't actually a specific weight capacity for any 5th wheel base rail kit, including the B&W Custom Installation Kit w/ Base Rails # BWRVK2401 that fits your 2016 Ford F-250.
Base rails are designed to meet the tow capacity of the vehicle and hitch, so those are always the limiting factor. As for the hitch, so long as your PullRite SuperGlide 2300 is an ISR series - which stands for "Industry Standard Rails", it will work with the # BWRVK2401.
view full answer...
Go To Results