Replacement Lug Nut for a 2008 Jayco Octane ZX TT Toy Hauler

Question

Question:

would a representitive confirm the correct fitment of these products ?

asked by: William S

0

Expert Reply:

Hey William!

The DeeMaxx Trailer Wheel Lug Nut # DE93GR will fit the wheels on your 2008 Jayco Octane ZX TT Toy Hauler as long as they have a cone shape where the studs protrude through the wheel. This lug nut fits a standard 1/2" stud and has the standard 60-degree cone fitment so as long as that's what you have then you'll be good to go!

expert reply by: Jon G

0

Answer 1

Yes, the 60-Degree angle of the 1/2"-20 DeeMaxx Trailer Wheel Lug Nut #DE93GR is standard for the vast majority of trailer wheels out there. There are some 90-Degree cone shapes but these are typically for 5/8" and 9/16"…

view full answer...

Answer 2

The DeeMaxx Trailer Wheel Lug Nut #DE93GR that you were looking at are chrome, not stainless steel. For a comparable lug nut in stainless steel, you will need the Kodiak Trailer Wheel Lug Nut #KALN1375S.

view full answer...

Answer 3

A 19 mm socket would be needed to remove the DeeMaxx Lug Nut part #DE93GR.

view full answer...

Answer 4

The DeeMaxx Trailer Wheel Lug Nut #DE93GR is 1.4" in length.

view full answer...

Answer 5

We do have 1/2"-20 lug nuts that are solid and not capped, though no OEM direct replacements. What you can use is the following: - DeeMaxx Trailer Wheel Lug Nut #DE93GR

view full answer...

Answer 6

The Americana Trailer Wheel Lug Nut #AM90049 has a flat length of approximately 7/8" for your hex socket. We do have the Chrome Trailer Wheel Lug Nut #12CLN-L which also fits a 1/2"-20 thread and has a 1-3/16" flat area for…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 11

For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2" to…

view full answer...

Answer 12

The factory trailer brake controller port on your 2021 Chevrolet Tahoe is located underneath the dash just to the left of the steering wheel. It will be taped to another harness so it may take a bit of looking to find. Keep in mind that if your Tahoe…

view full answer...

Replacement Lug Nut for a 2008 Jayco Octane ZX TT Toy Hauler

Product Page this Question was Asked From

Continue Researching