We have a couple of solutions for you you could simply use an adapter like you mentioned the Buyers Products 6-Way Round to 7-Way Blade RV Adapter with 8" Prewired Cable part # 337TC1067P would do the job but is an adapter so you're adding points of failure there.
I instead recommend adding a 7-way female socket on the back of your coach again an idea you had. The wiring process is very simple and I can provide you with the wiring schematics to guide you through it. To do this you will... view full answer...
When installing the Roadmaster Split Bushing for Anti-Sway Bar part # RM-205249-10, I recommend using the Mystik JT-6 part # L74FR. This is a marine grease that is very similar to what comes with their sway bars. view full answer...
The trailer hitch options for a 2007 Dodge Sprinter are different for models with the factory step bumper and models with the standard bumper. The two are not interchangeable so if you have the factory step bumper then you'll need the Curt Trailer Hitch Receiver part # 13358 or if you have the standard bumper then you'll need the Curt Trailer Hitch Receiver part # C13388. view full answer...
Actually the Jensen RV TV with DVD Player # JTV1917DVDC that you referenced comes with a cigarette lighter adapter that you can use to power it. I attached a picture of what the cigarette lighter that comes with this looks like. view full answer...
Platform-style hitch-mount cargo carriers such as those shown on the link provided come in a variety of sizes. Some can be folded up when not in use and some include ramps to facilitate loading. These typically have a steel mesh decking material and are available with weight capacities ranging from 300 to 600 lbs.
However, these are designed for cargo loads, where the total weight is distributed across a large part of the carrier surface area. They are not intended to support a person,... view full answer...
If you had a 7-way connector at the rear of your vehicle you would probably know it. It would be a black connector plastic connector like the picture I attached. If you have one then the # 118381 would work for you.
If not, you would instead want the Curt Wiring Kit part # C59496. view full answer...
You are definitely on the right track. All of the parts you mentioned would work well together and would give a great braking solution for your trailer.
The assemblies part # AKEBRK-7L-SA and # AKEBRK-7R-SA will fit your trailer and will work great. The Curt breakaway system part # C52028 is a great system to use, the Demco coupler part # DM13203-95 will provide you with a 2-5/16 inch ball coupler.
And then the P3 part # 90195 and # ETBC7 will work great for installing a brake controller... view full answer...
There are not any Firestone Brackets that are a fit for your Sprinter 3500.
For your suspension enhancement, I recommend the RoadActive Suspension Kit # RAS3620-E. This is a mechanically adjustable system that will allow you to adjust the ride of your Motorhome and give you the additional support you need. This will reduce sway and body roll.
I've linked the page to all your other options if you prefer a jounce style spring. view full answer...
The adapter for the Thule HideAway Awning # TH490010 that you referenced that allows it to fit in the top channels of roof rack crossbars is the part # TH490001 which does come with M8 T-Bolts like the part # 853-5715 that you mentioned. If you wanted just T-bolts that fit the # 853-5715 would be what you need. view full answer...
Because an ambulance will have a lot of equipment and in it and the the weight of people, the stock suspension will be compressed already. This can lead to the rough ride you described. Adding a Timbren system like # TMBRSP25 for a 2006 Dodge Sprinter 2500 or # TMBRSP35 for a 3500 will reduce the stress on the factory suspension and absorb road shock and reduce roll. This will provide a much better ride.
Both sets have a capacity of 8,600 pounds and are made of rubber. I have included... view full answer...
In order to use the Surco Safari Rack 5.0 Rooftop Cargo Baskets on your 2006 Dodge Sprinter you will need the Surco Safari Rack 5.0 Rooftop Cargo Basket for Yakima Roof Racks part # SPS5084-Y400 which mounts using the Yakima Round CrossBar System part # Y00101 and part # Y00411. This is the longest available roof basket we have for your Sprinter.
I checked with Surco and they do not list any of the Surco Safari Rack 5.0 Rooftop Cargo Baskets for Factory Rails like part # SPS5084-1101... view full answer...
It's likely you actually have a 2007 model year as that is when the longer 170" wheelbase was used and in which case you can use the Curt Trailer Hitch Receiver part # 13358 if you have the factory step or part # C13388 if you just have the standard bumper. view full answer...
If your 2008 Dodge Sprinter 3500 has a 144 in wheelbase and a factory step bumper, then the Curt Class lll Trailer Hitch, part # 13375 is designed for your van. This hitch has a 2 inch receiver opening.
This hitch has a 5,000 gross trailer weight towing capacity. This hitch is rated for up to 7,500 lbs if a weight distribution system is used.You will want to check your owner's manual or with your dealership to make sure you do not exceed the towing capacity of your van.
If you plan on... view full answer...
The Optronics LED Off-Road Light Bar # UCL22CB comes with just basic wiring. The wire is 16 inches long and 16 gauge. The video simply shows us using alligator clips to a power source, but I recommend you use a switch like # EJ-3520-LSW or # PK34513. view full answer...
I do have a roof rack option for a 2004 Dodge Sprinter with High Roof but there are no bolt-on options. Instead, you can install artificial rain gutter mounts on the side of the roof with the Thule Artificial Rain Gutters part # TH542 then use the Thule Square Bar System part # TH65BJ and part # TH712500. view full answer...
The correct rear anti-sway bar for your 2013 Sprinter 3500 would be the Roadmaster Anti-Sway Bar part # RM-1209-131. You will need to remove your old sway bar before you can install this product since they utilize the same installation points.
The part # RM-1209-131 that you referenced is for older model Sprinters and gets installed in conjunction with the factory bar but would not work for you since it is for older model Sprinters. view full answer...
For what you are wanting from the Hollywood Racks Destination E-Bike Rack # HLY66ZR your best option would be a pivot adapter like the Yakima part # Y02483 as it will give you the additional extension you are wanting as well as gives ability for the rack to swing out and away for rear door clearance like you are wanting. An extender won't allow your rear door style to still open. view full answer...
The trailer hitch I recommend for your 2008 Sprinter is the Curt Adjustable Hitch, part # 13703.
This trailer hitch will work with frames from 22 to 72 inches and the hitch has a 2-inch receiver opening. The hitch can either be bolted or welded on and will work with box frame, C-channel frame, or I-beam frames.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with... view full answer...
The Ark Drop Down Corner RV Stabilizer Jacks # AR34FR that you referenced installs by having the top of the bracket weld to the bottom of the RV frame. view full answer...
I have a few options for your 2006 Dodge Sprinter 2500 with 2.7L I5 Engine, a block heater like the Kat's Heaters Custom Engine Block Heater part # KH11483 or an engine oil pan heater like the Kat's Heaters Oil or Transmission Pan Heating Pad part # KH24500. I recommend the block heater as it's a custom fit, designed for your exact vehicle whereas the oil pan heater is a universal stick-on type.
I agree that an oil pan heater with direct submersion would be best but this is unfortunately... view full answer...
Go To Results