The wire in the Jacketed 2 Wire, 10 Gauge, Brake Wire, item # 10-2-1, is stranded, and designed for automotive applications. The temperature rating on the coating is 221 degrees Fahrenheit. This allows for use of the wire for up to 40 amps at up to 25 feet.
This is the wire we use to wire the brake output wire and the 12 volt power wire when installing the Brake Controller 7 & 4 Way Installation Kit, item # ETBC7, and a brake controller on vehicles that do not have an existing 7-way connector... view full answer...
The Integrated OEM Tailgate Lock, # LH-007, is designed to be an exact replacement to the factory handle. The locking mechanism is made of zinc coated steel, similar to the plating on heavy duty Grade 8 nuts and bolts. The handle is the same plastic that the vehicle manufacturer uses. view full answer...
You should have no problem using the Convert-A-Ball Gooseneck Coupler Adapter, # CAB-C5G, on a 1,200 mile trip as long as the gross weight of your trailer remains under 20,000 lbs and the pin weight is under 4,000 lbs. We had one customer comment that he has been using his adapter for over 20,000 miles and it is still working great.
The only note I would add to this adapter is that there will be a noticeable difference in the ride quality if you are used to towing with a fifth wheel hitch.... view full answer...
The Curt jack part # C28304 is made in China.
We do have a similar rated and style jack, the Dutton-Lainson part # DL22683, that is made here in the US. This jack has the same 2,000 pound capacity and 15 inches of lift. It's also a weld on jack that swivels just like the Curt. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75101 you were looking at is designed in the USA but produced in Mexico.
If you are wanting a trailer hitch receiver made in the USA I have a few options.
I recommend the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25132 as it is the only USA made trailer hitch receiver for your 2000 Dodge Ram Pickup that does not require drilling and will fit both long and short bed models with the standard or step rear bumper.
If you are ok with an... view full answer...
I believe you are talking about the weather seals that come with TruXedo Tonneau cover # TX246601. Unless they are damaged or the truck is in extereme weather conditions frequently they can last as long as the cover does. Should you need to replace them for any reason there is a 4-pack available, # TX1703568.
The warranty would cover them if they were defective but it is a part that can wear out. the warranty specifically states:
"TruXedo, Inc. warrants that all new, unused products... view full answer...
The Westin Tube Steps mounting brackets are powder coated. They use the factory provided running board mounting holes in the rocker panels. I have checked the install instructions for the Dee-Zee and the Pilot Automotive Tube Steps offered for your vehicle, they all mount in the same manner. GM trucks use the body mount bolts as an attachment point, but Dodge uses the rocker panels.
Westin states that their tube steps have a 300 pound weight capacity, which should be plenty strong enough... view full answer...
Each of our 10 Inch lube plates for fifth wheel hitches are made from nylon, which is going to just as good a job as the graphite lube plates so you don't have to use any grease. The 10 inch lube plates we offer are:
- Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721
- Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter # RP83002
I have added links to video reviews of each of these lube plates for you to check out. view full answer...
The temperature rating for the 10 Gauge Jacketed 2 Wire is 105 degrees celsius. According to the information I found, 10 gauge wire with a 90 degree celsius insulation is rated to 40 amps. With 105 celsius insulation, it should be able to handle over 40 amps. view full answer...
I may have a solution for you if you're looking for a Pintle mount that is Made in the USA, but the Buyers Products 2" Pintle Hook Mount - 1 Position - 9" Shank # 337PM84 is manufactured overseas. However, B&W makes all of their products in the USA so you may want to have a look at the B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 6 Hole - 16,000 lbs # BWPMHD14001, which is similar to the # 337PM84.
I've also linked our entire selection of B&W Pintle hook mounts that you... view full answer...
When considering the country of origin of pewag chains like the # PWE2221SC, it truly depends on which chain model. I am happy to report, though, that the # PWE2221SC are made here in the U.S.A. They are confirmed to fit your 1999 Dodge Ram Pickup with size 245/75-16 tires. As with all tire chains, I recommend consulting with your vehicle's owner's manual to make sure you are abiding by all of the manufacturer's guidelines. view full answer...
Both the Longview towing mirrors, # LVT-3100C, and the CIPA towing mirrors # CM11400 use plastic mounting hardware including the threads. Plastic may not seem durable but it is corrosion resistant and will also help prevent over-torquing the hardware which could damage the factory mirror housing. I have linked video reviews of both mirror sets for you. view full answer...
A 5/8" diameter hitch pin is usually made of steel, though some have coatings applied to help resist corrosion.
For example, the Master Lock Pivot Lock Hitch Pin for 2" Hitches # ML1465DAT is made of stainless steel, but there is also a version - the Master Lock Pivot Lock Hitch Pin for 2" Hitches # ML1495DAT - which is a chrome-plated steel hitch pin with a chrome-plated aluminum barrel. view full answer...
There are a few more products you would need to complete a 16 foot awning with part # LCV000231520. The material is 500 x 500 fabric denier at 13.5 ounces per square yard of vinyl/woven acrylic material.
You will need the Solera Manual Pull Style Awning Drive Head # LC271181
Solera Manual Pull Style Awning Idler Head # LC272397
Solera Rollbar Only For 16' White Awning # LC260560357
Solera Manual Awning Pull Strap # LC292794
Solera 63" Short Awning Support Arm # LC97UD
We don't have pictures... view full answer...
All of the pins on the Power Grip RV Power Cord Adapter # CAM55185 will be active. There isn't a single pin that is used with this adapter. view full answer...
Yes, the Brophy trailer hitch ball # CB26C is made in the USA. Brophy has several options that are made in the USA. And they also have some that are not. But this one is. view full answer...
The CIPA Replacement Side Mirror, # CM46410, is chrome-plated and plastic so it is made of metal and automotive grade plastic. The housing is chrome-plated. view full answer...