The connector that you found under your dash is actually the OBD-II port which is why it doesn't quite match up with a brake controller adapter, like part # 3034-P which fits Tekonsha and Draw-Tite brake controllers.
Typically we find on motorhomes that the brake controller plug is up under the driver's side dash, next to the steering column, or under the driver's seat. From what I could find it looks like your 2014 Coachmen Freelander was built on a 2013 Ford E-350 chassis. If you skip... view full answer...
Yes, a steering stabilizer would work great on your 2005 Coachmen Freelander that is built on a Ford E-450 Chassis. For that the Roadmaster Reflex kit part # RM47MR would be what you'd want. This is going to make steering and handling much easier. view full answer...
According to my research, the 2019 Kia Soul can be flat-towed with all four wheels down if it has a manual transmission. However, I strongly recommend you confirm this with your local dealer as the owner's manual was not very clear on whether or not it is recommended.
In order to flat-tow the vehicle with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a... view full answer...
If your Ford E-450-based Class C motorhome has a factory 7-way connector with a blue brake circuit wire then there should indeed be a brake controller connection port to allow plug-and-play installation of a controller like the Prodigy P3 # 90195 that will use the part you referenced, harness # 3034-P.
If you refer to the linked photo you'll see the spot on the dash behind which the connector is typically found. The mating gray connector you'll look for will be similar in size and shape... view full answer...
In order to determine the correct wheel stabilizer for your tandem axle trailer, you need to know the spacing you have between your wheels, as there isn't a standard spacing for trailers based on size. So all you need to do is take a quick measurement of the space between the tires at their closest point, which you'll use to determine the right stabilizers.
- Up to 5-1/4" Wheel Spacing: Ultra-Fab Chock and Lock Wheel Stabilizers # UF21-001070 (can be locked with Master Lock Padlocks #... view full answer...
No, having play in the your Roadmaster D-Ring Mount Adapters # RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it looks like it's 3/4" which would mean you need the Roadmaster D-Ring Mount Adapter # RM-035. You'll want to measure the thickness of your mounts to be sure though. view full answer...
I understand your frustration. I am including a link below in which the first two pages are of motorhome rated hitch bike racks. I did see you are returning a Yakima Ridgeback hitch bike rack. I do have a recommendation that would be a similar hitch bike rack.
I recommend the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway - 1-1/4" and 2" Hitches, part # TH934XTR. It is motorhome approved. This rack carries four bikes. It has three points of contact when it is carrying... view full answer...
To connect your Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item # RM-522 to your D-Mounts you'll just need some adapters. Depending on the size of your mounts you'll need either the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick Item # RM-035-1 or the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick Item # RM-035. view full answer...
We do have what you need to carry a motorcycle on the back of your motorhome but first I recommend finding out if the RV rated that kind of tongue weight. From my research your 2016 Coachman Freelander Micro only has a towing capacity of 2,000 pounds which means its tongue weight should be no more than 300 pounds. You said you're going to change out the hitch receiver that doesn't necessarily increase a vehicle's capacity since there are other factors, like the chassis, that come into... view full answer...
We can help you with a RV-rated 3-bike hanging style hitch bike carrier for your motorhome. All such carriers appear on the linked page.
The Swagman Original 3 carrier # S64152-2 is a basic but sturdy 3-bike rack that fits a 2-inch motorhome hitch. I have owned this rack for several years; it is not a fancy "boutique" carrier but it is very solid and mine has held up extremely well. Unlike some racks this one can be used on motorhomes, towable travel trailers and large 5th wheels too (not... view full answer...
While we don't have air bag suspension enhancement that fits your 2018 Coachmen Freelander 27 foot motorhome we do have SumoSprings kits that fit like the # SSR-206-54 which will give you the stiffness and stability you are looking for to improve the ride quality.
I attached an install video for this kit for you to check out as well. view full answer...
This is a great question and one that can cause some confusion. SumoSprings capacity is determined by how much weight it takes to compress the spring down to 50% of its original body height, so a spring like the # SSF-106-40 will compress down to half of it's unweighted height with 500-lbs of pressure. The # SSF-106-47 is going to be a stronger spring with it's 1000-lbs capacity. Keep in mind, these aren't designed to upgrade the GVWR, but they're designed to help cushion the load that... view full answer...
What you are dealing with is called hyperflashing. You will want to use the Load Resistor Kit for LED Turn Signals item # DI34ZR to fix it. LED lights don't draw as much power as incandescent lights so there are issues with fast flashing until a resistor is added. The resistor increases the amperage draw to resemble incandescent lights.
The resistors will install directly behind the turn signals. I don't know what you mean by four way flasher but you'll need one of these per turn signal... view full answer...
Yes, the WeatherTech floor mat part # WT26DV that you referenced is the correct set of custom floor mats for your 2014 Coachmen Freelander Class C motorhome Ford E-450. view full answer...
The Roadmaster rear sway bar part # RM-1139-117 is the correct rear sway bar for your 2013 Coachmen Freelander QB21 since it is based on the E-350 chassis.
There is drilling required to install this and the install time would vary but our installers would say to set aside an evening and afternoon to get it all taken care of. view full answer...
I contacted Adco and they confirmed that the Adco RV Windshield Cover Item # 290-2409 is compatible with the 2020 and 2021 Coachman Freelander Class C motorhomes. view full answer...
The Ultra-Fab Dirt Bike Carrier # UF48-979033 that you referenced is safe to use at the hitch at the back of a motorhome like your 2014 Coachman Freelander QB21. To determine if it will clear the rear bumper you'll need to measure from the hitch pin hole of it out to the furthest point out on the rear bumper. If that distance is less than 5 inches this will fit and clear without issue. view full answer...
Yes, going to a new lock/latch for your RV entry door like the part # 295-000019 will be a great solution. Your latch does sound like it's worn out or possibly damaged which is making it hard to use but this replacement will be easy to use and won't require constant lubrication. view full answer...
I recommend using the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor - 15,000 Btu - White # ACDOM150 which is a direct replacement for Dometic AC units and can be used with ducted or ductless systems. This is a 15,000 btu unit, so they're equivalent to the units you're replacing and will do a great job as a replacement. I also really like that these units have built in start capacitors to help make sure your units will always be able to start, even if the... view full answer...
Go To Results