Expert Answers about Chrysler Pacifica

• Trailer Hitch that Fits 2022 Chrysler Pacifica Plug In Hybrid
• The etrailer brand # e98903 class III hitch fits all models of the 2022 Chrysler Pacifica, including the plug in Hybrid model that you have. Just installing a hitch would not void your vehicle warranty but I would recommend you look up the Magnusson Moss act which prevents voiding warranties of vehicles due to modifications.
  view full answer...


• What Hitch Will Fit My 2022 Chrysler Pacifica Hybrid
• For your 2022 Chrysler Pacifica Hybrid I recommend the draw tite # 76046-SK. This has been confirmed to fit hybrid models. I prefer this hitch over the others because it can hold more tongue weight (675 lbs) than any other hitch we offer. This will be more than strong enough to carry the Bikewing bike rack you mentioned, as well as all 4 bikes. I have included a link to our install video below. Installation will require trimming of the bumper fascia and the heat shield.
  view full answer...


• Left Side Trailer Lights Not Working with Tow Ready Wiring Harness for a 2007 Chrysler Pacifica
• The fact that it is on the left side only and happens on all the trailers you have tried indicates that there is an issue on the vehicle side wiring and possibly inside the converter box itself. To test it, have someone sit in the vehicle to run through the various functions (turn signals, running lights, and brake lights) while you test the wiring with a circuit tester, # PTW2993. Start by testing the wiring going into the converter from the vehicle. If you do not get the correct signal...
  view full answer...


• Trailer Wiring and Hitch Fits for All Models of 2017 Chrysler Pacifica
• For your 2017 Chrysler Pacifica we have two wiring harness configurations available. For the LX and Touring models we have the part # 118723 that you referenced. For the Limited models we have the part # 118712 as a confirmed fit. For a hitch the etrailer part # e98903 is a fit for all models. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
  view full answer...


• Bike Rack Recommendations to Carry 3 Bikes on a 2004 Chrysler Pacifica
• We do have trunk mounted bike rack options for your 2004 Chrysler Pacifica, however, Yakima, the manufacturer of Prorack racks, states that their trunk mounted racks are not compatible with your vehicle. I can also tell you that it is not recommended to carry more than 2 bikes on a trunk mounted bike rack on your vehicle because the weight of a three or more bikes could damage your rear hatch. We do offer Thule trunk mounted bike racks like the Thule OutWay 2 Bike Rack, # TH45JV, which...
  view full answer...


• Trailer Wiring Connector # 118303 for 2005 Chrysler Pacifica Shows Constant Power on Running Lights
• There should not be any major constant power draw on any of the circuits on wiring harness # C55530. Though there may be some residual power coming through. There may be a short or ground issue that is causing some power to trickle through. Check the vehicle side connector for any dirt or corrosion and clean it out. Do the same for the connector on # CR-600LED.
  view full answer...


• Troubleshooting Installation Alignment on etrailer Trailer Hitch Receiver for 2018 Chrysler Pacifica
• The issue you are having with the # e98903 hitch holes not lining up correctly on your 2018 Chrysler Pacifica is likely due to the hitch being bent. Sometimes a hitch gets slightly bent during shipping, which may result in misalignment during installation. I would inspect the hitch and make sure there are no cracks, chipped paint, or stress marks. These are signs that the hitch may have flexed enough to be considered unsafe and should be replaced. Assuming that is not the case, the trailer...
  view full answer...


• Will The etrailer Trailer Hitch Receiver # e98903 Fit 2019 Chrysler Pacifica Touring Plus?
• Yes the etrailer Trailer Hitch Receiver # e98903 is a confirmed fit for your 2019 Chrysler Pacifica Touring Plus. I recommend installing the T-One Vehicle Wiring Harness # 118712 when you install the receiver. The Mounting Bracket # 18144 will allow you to connect the 4-way to the mounting tab on the receiver.
  view full answer...


• Can The Thule Atlantis 1800 Mount To The Rhino-Rack Platform Rack?
• Yes your Thule Atlantis 1800 will fit onto the Rhino-Rack Pioneer Platform Rack # RR42115BF just fine! However, to do so, you are going to need the: -Rhino-Rack Accessory Bars for Pioneer Platform Rack # RR43137B. This will add an aero crossbar setup to your Pioneer platform rack so you can mount your Thule Atlantis 1800. From here you should have no issues with clearance, and will be able to access your bars.
  view full answer...


• Recommended Trailer Wiring Harness for 2017 Chrysler Pacifica Hybrid
• The Tekonsha T-One Vehicle Wiring Harness # 118723 referenced in your question will work perfectly on your 2017 Chrysler Pacifica Hybrid, as long as it is the LX or Touring model. This custom harness will install by connecting directly to the built-in port that is located behind the driver side and passenger side tail lights on the vehicle. This will provide you with a 4-Way connector that will connect with and power a trailer's basic signal lights. I have attached an installation video...
  view full answer...


• Will etrailer.com Hitch Allow Hands Free Liftgate to to Function on 2019 Chrysler Pacifica Hybrid
• The etrailer.com hitch part # E98903 that fits your 2019 Chrysler Pacifica Hybrid will still allow your foot operated hands-free liftgate to operate but you will have to kick to either side of the hitch opening to activate the sensor. I attached an install video for this for you to check out as well.
  view full answer...


• 2017 Chrysler Pacifica Touring L Lower Fascia Trimming to Install etrailer Trailer Hitch
• The lower rear underbody panel of your 2017 Chrysler Pacifica will need to be trimmed to install the etrailer hitch part # e98903 that you ordered for your vehicle. If you check out the instructions and installation video, you will see where it needs to be trimmed.
  view full answer...


• How to Install a 7-Way Connector and Brake Controller on a 2006 Chrysler Pacifica
• I have recommendations for you but unfortunately, you will not have a factory plug in under your dash nor will you have a factory 7 way or 4 way at the back of your 2006 Chrysler Pacifica. This is because a factory tow package is not available for your vehicle. However, if you are looking for the proper wiring and brake controller to tow a trailer with brakes, I have the wiring you will need to do so. First, for a brake controller I recommend the Tekonsha Prodigy P3 Brake Controller...
  view full answer...


• Will Tow Ready 7 Way Trailer Connector Vehicle Tester Work With RV Freightliner Chassis 7-Way
• The 7 Way Trailer Connector Vehicle Tester part # C73NR is pinned to test the vehicle side 7-way with a standard pin out. The BK function code should illuminate when you press the brakes not the LT and RT functions.
  view full answer...


• Towing Capacity and Components for 2017 Chrysler Pacifica
• According to the 2017 Chrysler Pacifica owners manual, the model without the tow package that includes the larger alternator and higher grade radiator is restricted to 1500 lbs with 150 lb tongue weight. The model that has the tow package is rated for a trailer with a 3,600 lb maximum and a 360 lb tongue weight. Adding the etrailer Trailer Hitch Receiver - Custom Fit - Class 3 - 2" # e98903 will give you a hitch receiver that is independently rated higher than your vehicle so you won't...
  view full answer...


• How to Identify Correct Brake Light Switch Wire for Brake Controller Installation in 2017 Pacifica
• The cold side of a brake light switch is used as the trigger signal to activate a trailer brake controller like the Prodigy P2 # 90885. The controller installation kit you purchased, part # ETBC7, includes a probe-style circuit tester that allows you to determine which of the wires at the brake light switch is connected the to cold side of the switch. The correct vehicle wire to connect to the RED wire on the controller is the one that goes hot ONLY when the brake pedal is pressed, and...
  view full answer...


• Recommendations for Carrying Bikes with a 2007 Chrysler Pacifica
• I checked with our suppliers and the roof rack side rails and cross bars on the 2007 Chrysler Pacifica are not strong enough for any accessories other than snow board and snow ski mounts. They do not recommend using any other roof mounted accessories like a bike rack on your vehicle. this means that you will need to select some other means for carrying bikes with your Pacifica. My first recommendation for you would be to use a hitch mounted bike rack and trailer hitch to carry bikes on...
  view full answer...


• Recommended Trailer Wiring Harness for 2019 Chrysler Pacifica
• For your 2019 Chrysler Pacifica I highly recommend the Tekonsha T-One Trailer Wiring Harness # 118712 if you have the Limited, Touring L, Touring L Plus, or Touring Plus model or the Tekonsha T-One # 118723 if you have the LX or Touring model. Both harnesses are custom-designed for your Pacifica and will plug into existing ports behind the tail lights. After running the power wire up to the battery you will have a fully-functional 4-Way to connect with and power a trailer's basic signal...
  view full answer...


• Trailer Hitch and Towing Accessories Recommendation-2017 Chrysler Pacifica
• The Curt # C13383 Class III trailer hitch includes all necessary installation hardware, which is shown in the photo you provided. If you plan on using the hitch for towing purposes, you'll need a few other items to complete your towing system: Trailer wiring harness, part # 118712 for Limited models or # 118723 for LX or Touring models Ball Mount/Trailer Ball kit, part # 989900 If you click the provided link, you can see the hitch installation instructions.
  view full answer...


• Can I Carry A Hitch Mounted Bike Rack Or Cargo Carrier With My 2018 Chrysler Pacifica Hybrid
• Great news! We do offer a a hitch for your 2018 Chrysler Pacifica Hybrid. I recommend the Curt Class III Round Tube Receiver Hitch part # C13383 because the 2" hitch will be the most versatile when it comes to accessories like bike racks. There are more options to fit the 2" hitch compared to the 1-1/4" hitch. The Curt 2" hitch is a glossy black powder no drill-installation hitch that can handle up to 400 lbs of tongue weight. If you prefer a matte black option for a more rugged look,...
  view full answer...