Do you have a Chrysler 300 or a 200?
The McNeil Weathertech # WT454031 front floor mats in Tan that you referenced are a fit for all models of the 2012 and 2013 Chrylser 200 and Dodge Avenger.
For a Chrysler 300, you would need # WT454251 for all AWD models (including the Limited model) or # WT453791 for all RWD models.
I have confirmed these fits with WeatherTech. view full answer...
Sounds like the carriage bolt hasn't slid all the way down into the carriage bolt block and that is why it is just turning. You have to pull the bolt all the way through the block so that the square shoulders of the bolt slides into the square hole of the block. view full answer...
With the Curt Trailer Hitch Receiver # C11133 on your 2013 Chrysler 200, Curt recommends using one of the following ball mounts.
First is the Curt Class II Drawbar # C45522 with either a 1-7/8" Ball # C40001 or 2" Ball # C40018. Or you can choose one of their Euro Style Ball Mounts with a 1-7/8" # C45591 or 2" # C45592 ball. Whichever you choose you will need a Curt Hitch Pin and Clip # F-4 to secure it in your receiver.
You will also need a Vehicle Wiring Harness # C56211 to control... view full answer...
The installation instructions for the Curt Class I receiver # C11133 specifically mention the procedure for installing the hitch on dual exhaust-equipped vehicles, to the hitch is indeed compatible with your vehicle.
The procedure specific to dual exhaust vehicles is mentioned in step one of the instructions, which you can see by clicking on the link provided. view full answer...
Thanks for the purchase and there is a threaded locking hitch pin that will work with your Curt Cargo Carrier for 1-1/4" and 2" Hitches # C18145. We have found that the Locking Anti-Rattle, Threaded Hitch Pin # S64029 is a fit for your cargo carrier and will work great to stabilize the carrier as well as help keep it secure from any miscreant with sticky fingers. view full answer...
When it comes to the replacement cradles for your Rhode Gear 2 Bike Rack The Replacement Cradle for Rhode Gear and Prorack Highway Bike Racks # RG8890083 is the only replacement cradle that we will have. It has a dimension of 1-5/8 inch x 2-1/8 inch x 4-1/2 inch, with an inside diameter of 1-3/32 inches.
This cradle fits The Rhode Gear Highway Bike Carriers listed below:
8015200
8015201
8015202
8015215
8015216
8015218
8015219
8015220
8015221
It also fits Prorack 2 Bike Rack for 1-1/4... view full answer...
For your 2011 Chrysler 200 you will need a 1/2 inch bolt leader # 80101-1. If you have never used one before I have linked a video demonstrating how it works. view full answer...
According to Saris, their # SA805BL Bones two bike trunk mounted bike carrier isn't compatible with the convertible model.
Hollywood Racks offers several 2 bike models that will fit. I'd recommend their Express 3 bike model, part # HRE3. However, this will not fit if your 200 is equipped with the factory spoiler.
If you do have a spoiler, I recommend the Malone Hanger Trunk Bike Rack for 3 Bikes - Adjustable Arms # MPG2139, you can use it with 1, 2, or 3 bikes. This rack is confirmed... view full answer...
Yes, all of our trailer hitch receivers, like Draw-Tite # 24919 that you reference, come in a box and with the hardware included. This trailer hitch receiver is confirmed to fit your 2015 Chrysler 200.
If you ever need replacement hardware you can order it on our site using part # RHK. You will simply go to the # RHK product page and select the hitch manufacturer and type in your hitch part number before placing your order.
I have attached a video of this receiver being installed on a... view full answer...
To add a hitch to your 2015 Chrysler 200, I recommend the Curt item # C11403. This hitch is custom fit and bolts to your Chrysler with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
If you are planning on towing you will also need a wiring harness item # C56242 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball. view full answer...
The instructions for trailer hitch # 24919 are linked here and on the product page. Look for the black and white wrench icon.
The proper ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # C56242. Its instructions are also linked here and on its page. view full answer...
For a trailer hitch for your 2012 Chrysler 200, I recommend the Draw-Tite trailer hitch # 24871 because it does not require the use of a stabilization strap for non-trailer loads like the Curt hitch does. I have included a link to the instructions and a video showing a typical installation for you.
Because this is a Class I trailer hitch there are only certain bike racks that you can use. The HitchSki, # Y02418, only fits on certain Yakima 4-bike racks, none of which will fit in a Class... view full answer...
We do offer a range of floor and trunk mats for your 2014 Chrysler 200 Convertible. All available products can be seen on the link provided.
You can use the filters on the page to narrow the results based on mat color, which part of the vehicle you're concerned with and manufacturer.
Covercraft offers carpeted mats in many color choices, and Husky Liners offers a black thermoplastic cargo liner, part # HL40091. All of these cargo mats are custom fit types made specifically for your 200... view full answer...
The hitches available for a 2011 Chrysler 200 Convertible only have a 200lb tongue weight capacity so you that would leave you with 80lbs of capacity left for a cargo carrier to haul the scooter on. The trailer hitches that we currently offer only have a 1-1/4" receiver tube opening though so you'll likely have a hard time finding a cargo carrier with a ramp to get the scooter onto the carrier.
That being said, you'll want the Curt Trailer Hitch Receiver # C11133 for the trailer hitch... view full answer...
Your 2013 Chrysler 200 has the transverse Pentastar 3.6 liter which Kat's recommends their heater part # KH11814. The cartridge location you need to use is right behind the engine block on the driver side. So the side of the engine that faces the firewall and all the way on the driver side. view full answer...
Use of any hitch adapter such as the Brophy # HTAD will cause you to lose half of your hitch's rated capacity due to the change in the geometry of the whole system. Because an adapter pushes the actual weight load further away from the hitch, it will put more leverage on it. This means a 200-lb-rated Class I hitch suddenly has only a 100-lb capacity.
I suggest you use a support strap like # 18050 to help stabilize the loaded rack.
The best option is to use a Class I bike rack that needs... view full answer...
I took a look at the installation instructions of the Draw-Tite # 24919 hitch (which are also linked for you) and found the only difference when installing it in the single or dual exhaust models of a 2016 Chrysler 200 are that the single exhaust models require trimming of the underbody panel.
Apart from that they are the same bolt-on installation and will not require any drilling in your Chrysler's frame. view full answer...
I checked with Hollywood Racks and the Hollywood Racks Gordo 2 Bike Carrier # HRG2 that you referenced has been confirmed to fit your 2011 Chrysler 200 Convertible. They tested this rack and found that the trunk is secure and strong enough for the weight of the rack plus two bikes.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Hollywood Racks Bike Frame Adapter Bar
# HRBA-PRO to provide a horizontal... view full answer...
Yes, I can email you the installation instructions for Draw-Tite trailer hitch # 24919. Installation is not difficult at all on your 2015 Chrysler 200.
If you plan on doing any towing first consult the vehicle owners manual to make sure it is permissible to do so. For a ball mount use # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # C56242.
If you want to use the hitch for a bike rack or cargo carrier then make sure that the item... view full answer...