According to my research, your 1993 Rockwood Frontier Class C Motorhome is on a 1993 Chevrolet G30 Chassis. If this is the case then the correct rear anti-sway bar for you is the Roadmaster Rear Anti-Sway Bar for Motorhomes part # RM-1109-121. If you can provide me with the VIN of your motorhome I would be happy to confirm the above for you. view full answer...
The best trailer hitch option we offer for a 1975 Chevrolet G20 Van is the Multi-Fit Trailer Hitch part # 5350 which fits frames between 24"-46". It will require drilling but there are no bolt-on options. It has a 5,000 lb weight capacity with 500 lb tongue weight rating.
Please note, this is a general application product and it is the responsibility of the installer to select a structurally safe location for attachment. view full answer...
The air line that comes with the # AL88105 SHOULD be long enough for your application as it is 16 feet long and the replacement is # AL20086. The air line wouldn't need to run to the engine bay as it normally runs to cab. But we do have a 30 foot hose with the part # F9153 which will work great.
Or you could go with a remote compressor like the part # AL25980EZ which wouldn't require running line up to the cab since a gauge wouldn't need to be added there. view full answer...
Since your truck has a box van on it there is a solution for installing a hitch, but a custom fit one like the # C13016 would not work.
I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box van like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. view full answer...
The bolt holes will line up. The fact that the 1988 Chevy Van was converted to a bus doesn't since it is still on a G30 chassis/frame. The issue that you have to be concerned about is how the body of the bus will affect the fit of a trailer hitch.
The issue is that the hitches available were designed for the stock vans. The bus body likely hangs a little lower and further back from the rear axle than the stock van body which will cause fit issues. This is the case the vast majority of... view full answer...
205/65R15 is not a standard trailer tire size so I wouldn't recommend that for use with a trailer. The tire size should start with the letters ST which stands for "special tire."
The closest tire size to what you are looking at that would work well is the ST205/75-15 like part # TTWTRTM2057515C which would work well. This has a higher than normal speed rating for trailer tires as well at 81 mph instead of 65 mph.
We don't have access to original equipment info for your trailer, but if... view full answer...
For that I recommend using either a 14 or 16 gauge wire. Either will able to safely handle the amp load for the lights on your box truck. We offer the # DW02412-1 for a 14 gauge or the # 16-1-1 for a 16 gauge wire. Both are sold by the foot. view full answer...
For your 1984 G30 Lazy Daze motorhome the correct rear sway bar is the Roadmaster # RM-1109-121 and then for the front # RM-1109-131. The biggest improvement will be the rear bar. A front bar will help quite a bit too but the biggest improvement is always the rear bar since that's where most of the weight is. view full answer...
Provided you have space for cooler # D15604 you could certainly use it on your 1984 Chevy G-series van. The overall depth is 2 inches, width 13 inches, and height 4-9/16 inches.
Or you could go with a remote cooler that has it own fan like # D15450. With this set up you are not limited to placing the cooler in the front of the vehicle. It could go anywhere there is space since it has its own fan. It is 4-5/16 inches deep, 12-3/4 inches wide, and 9-3/8 inches tall. view full answer...
For your 1984 Chevy Travel Craft Motor Home, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This trailer hitch receiver will bolt or weld-on to your frame and give you a hitch rated for 3500 lbs towing and 350 lbs tongue weight maximum. If you will be using a bike rack or cargo carrier, you will also need the support strap # 18050.
I recommend looking at your owners manual for any manufacturer restrictions. view full answer...
The most popular transmission cooler for the 1985 Chevy Van (G series) is # D13503 that you have referenced and it would be a good choice. Mounting it in front of the radiator is the second most efficient location, the most efficient being in front of the AC condenser core where it would get the most airflow whether the AC is working or not.
I have included some links on transmission coolers showing a typical installation and more information in general. Given the size of your vehicle... view full answer...
Yes, the RV Curtain Carriers # 37281455 could fit the snaps of the Bestotal A115 for RV Curtains Clear Glide Tape #9 or you could use them with the snap tape for RV curtains # 37281005. view full answer...
So based on the picture you submitted and the dimensions you listed it looks like you need a dump valve that will fit into the 3-1/2 inch pipe (3 inch spigot) and then need a 1-1/2 inch pipe ot fit over your other valve (1-1/2 inch hub).
The valve setup that covers that is the part # T18A as it has a 3 inch spigot and a 1-1/2 inch hub. view full answer...
The Air Lift LoadLifter 5000 part # AL88105 that you referenced does not come with a compressor. Since not everyone ends up wanting a compressor we offer them separately. For a non-Bluetooth kit the Air Lift Compressor part # AL25854 would be a really great option. This puts a gauge up in the cab of your vehicle that allows you to control the pressure from and comes with a heavy duty compressor which will inflate the bags a little quicker. view full answer...
Draw-Tite trailer hitch # 41121 fits the full size 1995 Chevy vans like yours and does not require drilling or trimming for installation. It does not fit models with a step bumper and based on your picture you do not have a step bumper so that is not a problem either. I have included a link to the instructions for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4... view full answer...
I recommend the Gen-Y Phantom X Adjustable Ball Mount w/ Stacked Receivers for 2" Hitch # GY59VR. This will give you the ability to carry up to 700lbs of tongue weight and will spread out your Thule bike rack and a 60x24 etrailer Cargo Carrier # e98874. Be sure not to exceed the vehicle or receiver weight capacity on your 1994 Chevrolet Van.
The etrailer Cargo Bag w/ Mounting Straps # 988501 will help to keep your cargo clean and dry while you travel.
The Malone 2" Dual Purpose Hitch... view full answer...
The Ultimate Trailer Jack # 322-RDJ-2K is rated for a tongue weight of 2,000 lbs. As long as your 22 foot travel trailer has a tongue weight less than that amount you will be fine to use this jack. Most trailers have a tongue weight that is 10-15% of the total trailer weight, so based on that your trailer could be up to 13,225 lbs total weight and you'd be good.
This jack does not come with a foot plate, so I recommend # JF-101BK which is rated for up to that same 2,000 lbs and can be... view full answer...
The Front Suspension Enhancement System that is designed to fit your 1985 G30 Van I recommend is part # TGMFG20.
This system provides additional support and helps maintain stability when carrying heavy loads. No drilling is required for installation because this system is designed to replace the bump stops you currently have on your van. view full answer...
According to the research I did a G30 Chevy van is basically just a full sized van, so for your 1991 Chevy G30 van you would want the Draw Tite Hitch part # 41121 that you referenced as it has been confirmed to fit.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with... view full answer...
Go To Results