The Reese Weight Distribution Shank, part # RP63971, will give you a 6-1/2 inch drop if you are using it with a round bar weight distribution system. It will only give a 4-3/4 inch drop when used on a trunnion bar weight distribution system.
If you need a shank with more of a drop for a trunnion bar weight distribution system, I would have the Reese Weight Distribution Shank, part # RP3344. This shank has a drop of 7-5/8 inches when used on a trunnion bar system.
I am sending a link to... view full answer...
The box you are referring to is the Roadmaster Even Brake Portable Proportional Braking System, part # RM-9400 which applies brake pressure to the vehicle being towed in proportion to the brake pressure you apply to your motor home. This will work to actuate the brakes on your Trailblazer. view full answer...
We know that the Fulton Fender part # F008583 that you referenced will easily fit on a Shoreland'r trailer that has tandem axles but it is not a direct bolt-on application. Some small modifications will need to be made. Check out the review I attached from a customer who did this. view full answer...
There is a wiring kit that will allow you to flat tow your 2021 Chevy Trailblazer RS, and what you will need is a kit from Roadmaster that is compatible with your vehicle's lights:
- Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage Incandescent Tail Lights # RM26FR
This is needed to ensure the taillights on your '21 TrailerBlazer don't look like the brakes are always on; since your taillights that use the same wire to power the brake lights and taillights, this... view full answer...
We have similar grille guards for your 2003 Chevrolet Trailblazer, but Westin doesn't make bull bars or brackets for your vehicle.
Bull bars are made vehicle specific. The # 31-595PK brackets will fit the Westin E-Series Bull Bar # 31-5950. This bull bar is designed to fit 2006-2008 Dodge Ram 1500 Series. These brackets may work with the bull bar you have, but they will likely not work to install the bar on your 2003 Chevy Trailblazer.
If you're looking for a similar grille guard, I... view full answer...
The Yakima FatCat EVO 6, part # Y03096, is indeed compatible with the factory crossbars of your 2008 Chevy TrailBlazer. I have confirmed this with Yakima. view full answer...
The Swagman Rooftop Bike Carrier, item # S64720, may work on your trailblazer, but it is a universal design and has not been tested to work with the angled cross bars on your vehicle.
You would need to measure to determine if the 3-1/8 inches wide and 1-7/8 inches tall U-Bolts will be sufficient to span the width of the cross bars, and go through the rail far enough to allow the rack to be secured to the cross bars with the cross bars at an angle. A good way to do this would be to lay... view full answer...
The Replacement Hardware Kit for Westin Sportsman Grille Guard # 40-094PK that you mentioned are the correct replacement mounting brackets for the Westin Sportsman Grille Guards 40-0945 & 40-0940 for a 2001-2005 Chevrolet Trailblazer, and is not a fit for your 2006 Chevrolet Trailblazer.
Since mounting brackets are going to also be specific to the grille guard I am going to need to know what grille guard you're needing replacement mounting brackets for. With that information, I'd be happy... view full answer...
Great question! The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles # TSR14KT01 have an articulation of 1-27/32 so you need to make sure that you have about 4-5/8" of space above your tire. I confirmed this with my contact at Timbren who also sent me a photo to help demonstrate this. view full answer...
The Curt Anti-Rattle Hitch Clamp part # C27UR is compatible with any vehicle that 1) has a 2" x 2" receiver tube opening and 2) has a collar around the outside of the receiver tube opening. If your vehicle has both of these things then it should work well but Curt does not offer vehicle specific testing unfortunately.
If you would like to send a photo of your hitch I would be glad to see if I can offer any further fit info. view full answer...
I spoke to my contact at Timbren and they were able to confirm that the Timbren Rear Suspension Enhancement System part # TDVR350R would be a direct fit for the 1994 Dodge 350 Van Chassis you have on your Class B RV. The Timbren springs have a 6,000 lb weight capacity which will reduce sag and increase stability. The Timbren's will not require any drilling for installation which will make them very easy to install. view full answer...
Yes, the RockyMounts TieRod Roof Mounted Bike Carrier # RKY1012 that you referenced is designed to fit factory crossbars like what you have on your 2003 Chevy Trailblazer so it should work well for you as long as your bars are between 16 and 40 inches apart.
I attached a review video for this rack for you to check out as well. view full answer...
Yes, the Rightline Gear SUV Tent # RL110907 is a confirmed fit for your 2002 Chevrolet TrailBlazer. Both the tailgate and the rear door can be open or closed with the tent attached. The tent stays standing and ready for camping when your vehicle is detached and it is treated to meet the fire resistance standards of CPAI-84 and the Canadian Tents Regulations.
You will attach the upper straps to the roof rack rear bar or to the wipers if no rack is present.The lower straps, labelled F and... view full answer...
The Blue Ox Base Plate Kit - Removable Arms # BLU49FR is a confirmed fit for your 2021 Chevy TrailBlazer RS. Bumper fascia must be removed and replaced during installation. Requires some trimming of bumper (fascia, plastic, and/or grille) as well as some minor drilling. view full answer...
Even if your 2007 Chevy TrailBlazer has a factory 7-way there is not a plug underneath the dash for a trailer brake controller such as the Curt Spectrum # C51170; you will need to hardwire it with Wiring Adapter # C51515 though the wires will already be run if you have the factory 7-way (you should already have a factory 4-way). If you do not have the factory 7-way you will need to add the Universal Installation Kit for Trailer Brake Controllers # ETBC7.
I've added a link on installation... view full answer...
If your 2004 Chevy TrailBlazer has a two inch receiver hitch opening, then the Round Tube Stainless Steel Trailer Hitch Receiver Step for 2 inch Trailer Hitches, part # CR-600 will work. view full answer...
The Tekonsha Primus IQ Trailer Brake Controller part # TK90160 is an excellent option for a 2009 Saab 9-7X. That said, I checked with not only Tekonsha but all other aftermarket trailer brake controller manufacturers and none offer a plug-in adapter for this vehicle. However, if the vehicle does indeed have a pre-wired brake controller port the manufacturer (Saab) will offer a pig tail harness which plugs into the port on the vehicle and then splices into the brake controller. If not, you... view full answer...
I recommend measuring your crossbars and, so long as they are no more than 3-1/2 inches wide and 1-3/4 inches tall, the Rhino-Rack SUP and Surfboard Pads w/ Tie-Downs for Crossbars - Universal - 21-1/2" Long # RRRWP03 will be a great option to carry a kayak on the factory rack of your 2005 Chevy TrailBlazer.
I have added a link to a video review for you to check out as well of the Rhino-Rack SUP and Surfboard Pads # RRRWP03. view full answer...
As long as your Chevy Trailblazer has load bars that go from side to side on the roof of the vehicle that are less than 3-1/8 inches wide and 1-7/8 inches tall then the Swagman Upright Roof Mounted Bike Rack, item # S64720, will work on your vehicle.
If you need crossbars, I have included a link to the roof rack main page for your vehicle. Just select which style roof you have from the 3 choices to see the options for your vehicle. view full answer...
The Blue Ox Base Plate Kit, # BX1709, for your 2005 Chevrolet Trailblazer is rated for more than 5,000 lbs. Blue Ox states that the weight capacity of their base plates are designed to match the weight capacity of the vehicle they are installed on.
The 5,000 lb limitation is if you are using a base plate adapter like part # RM-033 which allows you to use a tow bar from one manufacturer and base plates from another.
If you use the Blue Ox base plates and a Blue Ox tow bar rated for 6,500... view full answer...
Go To Results