I spoke to my contact at Curt about your 2007 Chevrolet Silverado 2500 HD Classic.
They told me the Curt Class V hitch, part # C15312 is designed to fit your truck if it has the factory cutout bumper. They told me that the cutout is the recessed area on the bumper where the license plate typically goes. this hitch has a 2 inch receiver opening.
This hitch should sit right below the bumper and would be just what you are looking for.
If you need a ball mount for the hitch I recommend... view full answer...
We do have an option though nothing custom fit for your Chevy Silverado with a utility bed. What you may be able to do though is use a weld-on hitch from Curt:
- Class V Universal Weld-on Receiver Hitch and Brackets # 15901
The # 15901 can be welded onto frames that are up to 44" wide and it gives you a 3" drop from the frame, which based on how you described it should work for you. view full answer...
If you are speaking of the chrome trim piece that covers the entire rear of the mirror, the Snap-On Custom Towing Mirror you referred to # KS80800 is purposely designed for a tight fit over the OEM mirror. The added thickness of the trim piece would prevent the Snap-On mirror from being installed.
The K-Source Universal Clip-On Mirror, part # KS3891 would be your best option. The mirror features a large 5-1/8 by 7-3/4 inch mirror and ratcheting rubber straps that ensure a tight fit. view full answer...
The difference between the 2007 Chevy Silverado 2500 and the 3500 series trucks is the weight capacity. The 3500 is going to have a higher weight capacity than the 2500.
I spoke with the engineer at Timbren and he told me that the TImbren part # TGMRCK25S will fit on your 2007 Chevy Silverado Classic 3500, because the Timbren springs for the 2500 and 3500 models will install the same way on both truck models. These springs were tested up to 6,000 pounds and work well within those guidelines.... view full answer...
The designs of the Hopkins EasyLift, # 74211, and the DeeZee EZ Down Lowering System, # DZ43100 allows these two products to be installed on your 2007 Chevy Silverado Classic without interfering with each other. Our contact at DeeZee stated these two products should work together, however, they have not been tested together so it is not guaranteed.
Both products can be installed on the same side of the truck (driver side). I included a link to instructions and a video for you. view full answer...
Yes, the Demco Hijacker Premier Series Custom Mounting Brackets for 5th Wheel Above-Bed Base Rails part # DM8552012 is a confirmed fit for your 2007 Chevrolet Silverado Classic 2500HD. In order to attach a 5th wheel hitch to the above brackets, you will also need a set of base rails if you do not already have them and for this I recommend the Universal Above-Bed Base Rails for Demco Premier Series 5th Wheel Trailer Hitches part # DM6071.
The above frame brackets and base rails will work... view full answer...
The correct rear camper tie-down for your 2007 Chevy Silverado Classic 3500 long bed is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3501.
The other thing you may need, since you have a dually, is the TorkLift Camper Anchor Relocation Kit # TLA7004.
This will be needed if the distance between the front bumper of your camper and the center of the rear anchor point is less than 90 inches. view full answer...
The 1st generation Silverado/Sierra (1999-2006 and 2007 "Classic" model) 3/4 and 1 ton models use the same frame, but the suspension found on the 1 ton 3500 is stronger.
In terms of choosing a gooseneck hitch, for the 2007 Classic 2500 (same body style as the 2006), you'd want to use the B&W Turnover Ball, part # BWGNRK1067 that you mentioned. If you don't already have a trailer connector installed in the truck bed, you can install one using part # 41157.
I've linked you to install instructions... view full answer...
I have something that may work for you as using a 12" Extension # 3371804015 will reduce your receiver capacity by 1/3rd. So with a maximum trailer weight of 7,500lbs on the receiver you would only be able to tow up to 5,000 with the extension.
The Curt Multi-Ball Adjustable Ball Mount # D900 is adjustable and will not reduce your towing capacity. This hitch has a length of 15-3/4" from the center of the receiver pin hole to the center of the hitch ball. This is our longest ball mount... view full answer...
Mounting kits like the Replacement Mounting Brackets and Hardware for Westin 3" Round Nerf Bars # 23-232PK are vehicle and nerf bar specific and must be matched with the appropriate bars, for the appropriate vehicle.
That being said, the Replacement Mounting Brackets # 23-232PK mentioned will fit the Westin E-Series Round Nerf Bars # 23-2325 and # 23-2320 for a 2002-2009 Dodge Ram Pickup, and a 2008-2009 Sterling Bullet, and will not work for your Trail FX Nerf Bars.
Unfortunately,... view full answer...
You can certainly use a cushioned ball mount like the Convert-A-Ball # AMSC2HD along with a trailer that is equipped with a surge or hydraulic brake coupler.
The dampening action of the cushioned ball mount will not affect how efficiently the surge coupler compresses and actuates the trailer brakes, but it will lessen the jarring felt when the ballmount moves against the hitch pin.
I have linked you to our Ball Mount FAQ which will walk you through the process of choosing a ball mount... view full answer...
The leaf spring stack on the 2007 Chevy Silverado Classic 2500HD does not seem to bow very much as it is but with the Timbren springs installed, # TGMRCK25S, it would keep them from flattening out as much as they do now on your truck.
The Timbren spring will engage the axle before the spring stack is compressed for a more stable ride. I have linked a video showing installation of this kit for you and a link to our help article on Timbren springs. view full answer...
If you have a Thule branded TracONE Truck Bed Ladder Rack part # TH27000XT then the yes, the the Rhino-Rack Nautic 581 Rear Loading Kayak Carrier part # RR581 will fit. However, if you have a TracRac branded TracONE Truck Bed Ladder Rack TA27000-01 then no, the Rhino-Rack Nautic 581 Rear Loading Kayak Carrier part # RR581 will not fit.
If you do have the old TracRac TracONE Truck Bed Ladder Rack then you would need to upgrade to the new Thule branded TracONE Truck Bed Ladder Rack in order... view full answer...
The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part # TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the longer ones of the Derringer set. view full answer...
Since your 2007 Chevrolet Silverado has a standard 8 foot bed, you do not need to use a sliding fifth wheel hitch. Sliding 5th wheel hitches are intended for use with short bed trucks that may need additional clearance for sharp turns.
There are several options for towing a 5th wheel trailer with the gooseneck ball currently installed in your truck. The safest, and best option is to replace the pin box on the trailer. It sounds like you have not bought the trailer just yet so you might... view full answer...
You certainly can add Derale transmission cooler # D13502 to your 2007 Chevy Silverado with 5.3 liter motor without any problems. The only accessory that I recommend with this is special fitting # D13035. If you use this fitting you won't have to cut then flare any transmission lines. view full answer...
Yes, the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57575 will fit your 2007 Chevy Silverado 2500HD with a fifth wheel hitch installed and be the perfect way to help keep you level and improve the ride of your truck while you are towing.
I also strongly recommend installing the Air Lift WirelessAIR Compressor System # AL74000 with the helper springs because it has a wireless remote control which allows you to adjust the air pressure in each bag from the comfort of your truck's... view full answer...
There is a replacement tarp for a Truxedo Lo Pro QT on a 2007 Chevy Silverado 1500 wit a 5'8" bed, but part # TX545101-COVER is not a fit.
Instead you are going to need the Replacement Cover for TruXedo Lo Pro QT Soft, Roll-up Tonneau Cover # TX5806-COVER, which is the correct replacement for the TruXedo Lo Pro QT Tonneau Cover # TX580601 that you have on your 2007 Silverado 1500 Classic. view full answer...
Since you have a short bed I highly recommend using the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5GX1216. This will allow you to still utilize your gooseneck hitch and provides you with 7-1/2" of offset that should make it so that you have cab clearance while turning.
To make sure that the 7-1/2" of extra room will give you adequate clearance you can use the clearance formula which is: (A + B) - C = Clearance
A = Distance from center of fifth wheel hitch jaw (or... view full answer...
Yes, the rail and bracket kit # RP50064-58 is a great fit for your 2007 Chevrolet Silverado with a classic body, as long as you have a 6 foot or 8 foot long bed.
All the hardware and instructions will be included, but I have included a link to the instructions in case you would like a better idea of how the install will go. view full answer...
Go To Results