While we don't currently offer the mounting brackets separately I can tell you that you need the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57538 in order for your 2019 Chevy Silverado 2500 to have both a fifth wheel hitch and air springs. There are special instructions listed on page 9 for installing the kit when a hitch mounting bracket is already installed. You can try to reach out to Air Lift directly to see if you can get the correct mounting brackets, but both Air Lift and... view full answer...
There is a special gooseneck plate that fits in the puck system of the Reese Elite Series underbed mounting kit # RP30868. It is Elite Series above-bed gooseneck trailer hitch # RP30845. I have included links to the installation details and a video showing an installation of the under-bed kit # RP30868. view full answer...
This is correct and what your options are depend on what 5th wheel hitch you've currently got. If you've got a Curt 5th wheel hitch that fit into your 2018 Sierra pucks then you would typically be able to swap the legs for a new puck system and just re-use the head; for example you'd use the # CU53FR to adapt a Curt A or Q series hitch head to a 2021 Chevy Silverado 2500 with the OEM prep package.
The Demco # DM6333 adapter you were looking at would work if you had a hitch that fit into... view full answer...
Right now, the only available tailgate seal that Pace Edwards offers is the rubber seal like the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers # PE99CV.
This tailgate seal will fit the Pace Edwards Bedlocker, Full-Metal, JackRabbit, and the Switchblade tonneau cover. view full answer...
Yes, there is an adapter that will work with your 2024 Chevrolet Silverado 2500 with prep package.
The Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches # RP30156 will fit into the puck system in your Silverado and provide you with industry standard mounting points for your 5th wheel hitch.
The newer GM models actually use the same puck package footprint as Ford, so the # RP30156 will work for you. view full answer...
As long as the mounting tabs of your Husky 5th wheel hitch are either 20-1/2 inches or 29 inches apart, center to center measured side to side (see photo), there is an adapter available from Demco, part # DM6333. The adapter will drop into the existing pucks in your 2020 Silverado 2500 (you might need to make a few slight height adjustments) and then your hitch will attach to the adapter just as it would to regular bed rails.
I've linked you to a product demonstration video featuring the... view full answer...
Currently BOLT only makes the single Hitch Receiver Lock # BL7023582 which is rated for 16,000lbs. As an alternative check out the InfiniteRule Hitch Lock # 34061072-D. This stainless steel lock has a 42,000lb shear strength and since it has its own key you will be able to keep it in the future when you get a new truck down the road. view full answer...
The only air mattress for truck beds that may work with the side storage boxes on your 021 Silverado is the Rightline Gear Air Mattress - Full-Size Trucks with 5-1/2' to 8' Beds # RL110M10. This measures 80" long and only 51" wide and it is designed to fit between the wheel wells. This should work for you as long as you have at least 51" between the side storage boxes. The air pump is included with this mattress. I attached a demonstration video for you to check out. view full answer...
For your Curt A16 5th Wheel Hitch # C16521, I recommend the Sidewinder Wedge for Curt A Series 5th Wheel Trailer Hitches # C16992. This custom wedge replaces the universal wedge that came with your Moryde Orbitail Rotating Pin Box and works much more effectively to limit/prevent the king pin from pivoting in your A16 hitch by providing a considerably more secure fit, which is exactly what you're looking for. view full answer...
If you had a previous version of the Reese hitch part # RP30047 which was rated for 15k and wanted to upgrade it to the 16k version you'd need the kit part # RP30047A which is the head and crossmember. We've had this question before and have confirmed that this is the correct way to go about it with Reese in the past. view full answer...
We offer several choices in a front-mount 2-inch hitch receiver for your 2015 Chevrolet Silverado 2500 that can be seen by clicking on the included link. I recommend the Draw-Tite # 65078 since it is the most cost-effective choice. This hitch installs without drilling and it includes the required installation hardware. view full answer...
I have a solution for you, however, the Extang Revolution Soft Tonneau Cover Roll-Up is not available for your 2020 Chevrolet Silverado 2500 with 6-3/4" bed. If you want to go with a very similar style cover, I would look into the Access TonnoSport Soft, Roll-Up Tonneau Cover # A22020419. Like the Extang Revolution, this cover also sits above the bed adding only 1/2" to the bed height. It can be rolled up out of the way when not in use so that your bed can be used; some fold-up covers do... view full answer...
Curt makes several versions of their X5 5th wheel base rail adapter, such as # C16210 that fits their Double Lock gooseneck and # 16310 that fits the B&W Turnoverball gooseneck but there is not a version confirmed to fit the Bulldog round-shank gooseneck setup. I confirmed with my contact at Curt.
However, you do not even need base rails to use a 5th wheel hitch. Since you have the Bulldog gooseneck you can directly install the Draw-Tite Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter... view full answer...
The best option for you is the CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side # CM10950. These will cover up your turn signals on the mirror, but it will still fit properly onto your factory mirrors. No tools are required for installation. I attached a demonstration video to show you how they are installed onto your mirrors. view full answer...
There is not currently a non-OEM underbed puck system compatible with your 2021 Chevy 2500. The Reese Elite underbed pucks are what fit your Ford compatible Sliding 5th wheel hitch, but they have not yet made a compatible system for the new model Chevy/GM trucks as of 11/2020. Unfortunately that means there isn't currently a fit compatible with your hitch for your truck so another option will need to be considered.
My recommendation for a clean bed and sliding hitch for your truck is... view full answer...
The Demco fifth wheel rail kit adapter part # DM6333 that you referenced fits the OEM fifth wheel rail kit of your 2020 Chevy Silverado 2500 so it would work well for you. view full answer...
While we do not have the small safety chain loops from B&W separately we do have the Curt # C60691 which will fit your 2024 Chevrolet 2500HD. B&W only sells the Ram Kit # BWGNXA2062 and Ford, GM, Nissan Kit # BWGNXA2061 which includes the ball mount as well as gooseneck ball. view full answer...
You will want to install the isolation solenoid part # PK5231201 on the 12 volt accessory circuit of your 7-way so that it only is active when the truck is on.
I attached a picture that shows how to wire up the solenoid as well. view full answer...