I went out to our warehouse with a digital caliper and measured a thickness of right at 0.30" for the Buyers Products Mud Flaps # 337B36PSRPW. The flaps feature overall dimensions of 24" wide and 36" tall.
I have attached a short video review that you can check out as well. view full answer...
Unfortunately that 12 pin rectangular plug has nothing to do with the trailer wiring harness and people ask about it all the time. To add a 7-way connector to your 2019 Chevy Express 2500 van you're going to need to buy two separate harnesses. The reason for this is that the van's with the towing package came from the factory with the 7-way connectors like item # HM40975. The other ones have nothing and no one makes a custom fit 7-way that just plugs in.
The first connector you will need... view full answer...
I reached out to Swagman for you, who said the distance from the center of one wheel tray to the center of the opposite wheel tray is 9-1/2 inches on the Swagman E-Spec Electric Bike Rack # S94FR.
This is a heavy-duty bike rack that will carry bikes up to 70 lbs, and I have added a link to a video review for you to check out as well. view full answer...
On the Curt hitch # 14080 the rear hole to the receiver face is 14.36 inches. From the frame to the top of the receiver is 1.85 inches. view full answer...
The Curt Trailer Hitch, # C15320, is a Class V (class 5) hitch rated for 16,000 pounds gross trailer weight and 2,400 pounds tongue weight. It can also be used with weight distribution bringing the capacity totals up to 17,000/2,400 pounds.
It is designed to fit the following vehicles:
1996 - 2015 Chevrolet Express Van Full Size
1996 - 2015 GMC Savana Van Full Size
So, it is a fit for your 2004 Chevy Express Van. The recommended ball mount is # BWBMHD30010 and you can use pin and clip... view full answer...
The 2009 Chevrolet Express 2500 Van can be equipped with any of four hitch classes, III, IV or V. All are shown on the linked page. For each one we list the tongue weight and towing weight capacities, both with and without a weight distribution system employed. Trailer weight ratings vary from 5000-lbs for a Class III hitch # 75189 up to 17,000-lbs for the 2-inch Class V hitch # C15320.
The actual shipping weight of every hitch will appear on its individual page just above the quantity... view full answer...
From the forwardmost edge of the mounting bracket back to the face of the hitch receiver is going to be about 13-3/4" for the Adjustable Width Trailer Hitch Receiver # C13702 you're looking at. view full answer...
I went out to our warehouse and measured the Buyer's Products hitch, part # 3371801102, and it's 6-1/2 inches from the top of the mounting surface to the top of the reciver tube. Then it's about 9-1/2 inches to the bottom of the receiver tube and 10-1/2 inches to the lowest point which is the bottom of the wings on each side. I've attached a diagram as well.
The hitch is designed to fit the cab and chassis models of the Chevy Express and GMC Savana from 1996 to 2019. I've also linked... view full answer...
The distance between the center of the pinhole and the center of the ball mount of the Curt MV Weight Distribution System # C17057 is a minimum 11-1/2 and a maximum of 13 inches. This is because this part can move slightly due to the tilt range of the system.
If you need a ball to go along with the MV, you will need a hitch ball that has a 1-1/4 inch diameter shank. I went ahead and attached our product page that has all of the balls we carry that have a diameter of that measurement. view full answer...
The Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Skis or 2 Boards - Black # Y03095 has mounting holes that are inches apart. I reached out to my tech contact at Yakima and he said the Old FatCat 4 mounting holes are 12 inches on center and the newer FatCat 4 EVO will be longer at about 16 inches. Once you account for the width of the Aero Crossbar SmarT-Slot Kit 2 for Yakima FatCat Ski and Snowboard Carriers # Y03098 it will be another 1/2 inch on each side for the T-slot... view full answer...
For Curt trailer hitch # C15320 the weight carrying capacities are 16,000 pounds gross trailer weight and 2,400 pounds tongue weight. When used with weight distribution the gross trailer weight capacity is 17,000 pounds and the tongue weight remains the same at 2,400 pounds. It is not uncommon for a trailer hitch to have the same tongue weight capacity for weight carrying and weight distribution.
I have included links to the installation instructions and a video showing a typical installation... view full answer...
The Adco RV Windshield Cover, part # 290-2409, is designed to slip over the RV's doors' corners. This allows access to the doors for opening.
Since this cover is made for a tight fit, you may have to slip the corner pockets off of the door corners to open the door completely. I called Adco to confirm. They stated that though they cannot confirm the doors opening 100%, they most definitely will open enough to get in and out. view full answer...
I spoke to my contact at DeeZee and the Brite-Tread Running Boards # DZ1034 step platform will be 2.47 inches below the seem that mates with the underside of the door sill.
For example: if your door sill is currently 20 inches tall from the pavement and the bottom of the sill lets say is 3 inches from the top; then the top of the step platform on the DZ step will be 5.47 inches from the top of the sill making it 14.53 inches from the ground.
To determine your exact height you will just... view full answer...
I checked with Timbren and the overall height of the Timbren Suspension Enhancement System # TGMRG45 that you referenced is 5-11/16 inches. view full answer...
The Curt Front Mount Trailer Hitch Receiver # C31069 was designed around the frame of a 2014-2019 GMC Sierra 1500 and I would be very surprised if the distance between the frame rails of your 2014 Chevy Express Van Cutaway matched those of a Sierra.
The mounting holes on the # C31069 install on 31.875 inch centers. I've attached a snip form the installation instructions which shows this.
Since there isn't a custom front mount hitch available for our van, your best option is to go with... view full answer...
Unfortunately that 12 pin rectangular plug has nothing to do with the trailer wiring harness. To add a 7-way and 4-way connector to your 2023 Chevy Express Cargo van you're going to need to buy two separate harnesses. The reason for this is that the van's with the towing package came from the factory with the 7-way connectors like item # HM40975. The other ones have nothing and no one made a custom fit 7-way that just plugs in.
The first connector you will need is the Curt Wiring Harness... view full answer...
The sizing of the receiver is indeed an accurate 2 " x 2" for the Curt hitch that fits Chevy Express & GMC vans, the Curt Trailer Hitch Receiver # C15320. view full answer...
From the top of the spring bar where the chain attaches on the Blue Ox SwayPro Weight Distribution System # BXW1000 to the top of your trailer frame there will be a distance of just about 11 inches when set on the 9th link. Please also keep in mind that because of how the clamp on brackets attach to the frame this particular system will only work well on frames that are up to 6 inches tall.
For taller frames your best option will be to add the Reese Chain Hangers # RP58305 to use in place... view full answer...
The 7" when this rack is in the folded up position, you mentioned in your question, does take the cradles of this bike rack into account. This measurement is from the center of the hitch pin hole to the closest edge of the RockyMounts BackStage Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part # RKY10002. There is not a part of the BackStage closer than 7" to the rear of your vehicle.
If your spare tire is more than 7" from the center of your hitch pin hole, I recommend adding the... view full answer...