bing tracking image
  1. Wiring
  2. Spectro
  3. Wiring Protection
  4. Wire Loom
  5. 1/2 Inch Diameter
Wire Loom, 1/2" Diameter (per Foot)

Wire Loom, 1/2" Diameter (per Foot)

Item # 459075-1
Our Price: $2.00
Wiring
Shipping Weight: 0.02 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Great Prices for the best wiring from Spectro. Wire Loom, 1/2" Diameter (per Foot) part number 459075-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (141)
  • Q & A (0)
  • Videos (2)
  • Photos

Spectro Wiring - 459075-1

  • Wiring Protection
  • Wire Loom
  • Spectro
  • 1/2 Inch Diameter


Wire Loom 1/2" Diameter

  • Sold per foot


459075-1 Wire Conduit, 1/2" Diameter (per Foot)





Video of Wire Loom, 1/2" Diameter (per Foot)

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Spectro Wiring - Tools for Wiring - 459075-1 Review

Today, we're going to review part number 459075-1. This is the plastic wire loom, 1/2" in diameter. This part number is sold by foot. This part number is for 1 foot. Basically, how many feet you would need is you would just order this part number times how many feet you would need. I'll show you basically, there is about the 1 foot that you would get, and as you can see, it is 1/2" diameter.

It does have the opening on one side to where you can put your wires in. Basically, this would be used if you are going to do any wiring on your trailer or vehicle. Once you get your wires all run, you can put all the wires together in this loom to keep them in one spot. We also sell a related product if you need more than just the couple feet. Basically, we sell part number 459075, and basically, it's a box of 100 feet of this wire loom if needed. That should do it for the review on part number 459075-1. This is the plastic wire loom, 1/2" in diameter, per foot.

.

Customer Satisfaction Score:


Customer Reviews

Wire Loom, 1/2" Diameter (per Foot) - 459075-1

Average Customer Rating:  4.8 out of 5 stars   (141 Customer Reviews)


by:

Order came ahead of scheduled date,items are perfect. Can't wait for better weather to get trailer rewired. Gwendolyn was very helpful with the ordering process



by:

Harness is made well. Installation was vey easy.



by:

Item is as described, great instructions, fast shipping, would buy again!



by:

Product, customer service and delivery time were all exceptional in every way! The towbar and all accessories I ordered were a perfect fit without any modifications and the pictures and videos on your website were extremely helpful!



by:

This unit does not wrap around the tubing for the 3/8" pipe completely however it handles about 80% coverage and protects the tubing against the metal edges.



by:

Got surprise expedited shipping, got my packages quick and was able to work on my trailer before work. These are quality materials, not like the kind you get from your local stores.



by:

Excellent product options with decent prices. Fast and dependable delivery. Would definitely buy from E-Trailer again when the need arises.



by:

This inexpensive plastic "loom" is great for protecting hitch wiring. I used black electrical tape with a few wraps at the ends so that it won't "move".. and it installed on all the hitch wiring in just a couple of minutes. Thanks for a good product and prompt courteous service. :-)

" />


by:

Made it a very clean installation



by:

Everything I ordered has worked flawles sly.



by:

I installed the hitch, wiring, and brake controller myself on a Subaru Outback a year ago, and the only problem has been that plug cover has broken off. The hinge piece was made of plastic and got brittle in the cold. Otherwise, the set up have worked fine. The installation instructions were great, but the tight spaces made doing it myself a little tedious - routing the brake controller cable was the biggest challenge and would have been easier if the car had been on a lift.



by:

Again, another out of the park home run from etrailer. They ship fast, stock lots of items and will help you along the way. I bought a length of that crinkly plastic wiring cover and it worked magnificently on the deal. No weather is going to creep around and rot out the wiring and leave me stranded on the side of the road with no directional or brake lights, with no option left but to sleep in the parking lot of a Burger King while cursing the inferior online competitor that sells sub par crinklies. So put me in coach, I’m ready to safely drive with a well-lit trailer!



by:

I decided to completely rewire my 16' flat trailer due to broken wires and inoperative connectors. This product did the trick to replace a worn out wire cover. Easy to use. Just cut what you need and zip tie and electrical tape if needed. The videos and explanations by etrailer are really helpful.



by:

I purchased the both the hitch and proper wiring harness for my 2014 Kia Sorento from etrailer.com

They arrived quickly and in excellent condition.

The hitch install was fairly easy and the fit was excellent.

This is the second product I have purchased from etrailer.com and both were excellent experiences.



by:

I received my wiring harness and other components on the day in which they were promised for delivery. I had already viewed one of your posted videos on how to re-wire a utility trailer so I promptly installed the wiring harness and connected it to the lights which I had already mounted. Everything worked great! This was the first time I had re-wired a trailer and was initially apprehensive about doing the job myself. Your video made the difference! I have marked your website URL for future reference. You will be my "go to" site for trailer accessories and information.



by:

I ordered the receiver and the harness for the trailer brake lights. Both were plug and play very easy to install.



by:

I bought this wire loom to add an extra layer of protection around my 6 wire cable that runs the length of the underside on my utility trailer. It fit the cable just fine, but left very little room for any additional wire. This should add a bit of assurance to a replacement cable that was needed due to some road rash and a few shorts.



by:

I am glad I came upon this site. The staff is friendly courteous and helpful.

Since I live in Canada it is a big problem if I had to send items back across the border to etrailer if the items were not what I thought they were. The short videos that etrailer provides with each product is extremely helpful in determining to purchase or not. Thank you for that feature. Knowing a little about video production and the costs associated with that, it must cost etrailer a pile to give us (the consumers) what appears to be a simple addition on their site

Thanks again guys/gals



by:

Worked great to hide, protect and contain loose wires I had with my trailer brake controller installation



by:

I HAVE PURCHASED SEVERAL ITEMS FROM E TRAILER . FROM TRAILER PARTS TO REBUILD A CONSTRUCTION TRAILER TO PARTS FROM MY FIFTH WHEEL CAMPER . THE QUALITY OF THEIR PARTS HAS ALWAYS BEEN THE BEST .



by:

Purchased trailer hitch and wiring for 2016 Jeep Wrangler Unlimited. Received them immediately. Great video installation instructions on the website enabled me to install both very quickly without the need for cussing. Very satisfied.



by:

Part was shipped timely and was exactly what I ordered. Installed last weekend and trailer lights are working great.

The installation videos were very helpful. Thanks for the great service.



by:

All items in the order for trailer wiring components were exactly what I ordered and all items were delivered promptly. Good communication from Etrailer with reasonable prices, and FREE SHIPPING!! Nice.



by:


Ordered a 35' wiring harness and some
wire loom. Really fast shipping. No problems. I would recommend this site.



by:

e Trailer is AWESOME! I used to spend $1/foot on this cable wrap locally. I found e Trailer through a quick search online and saved myself 2/3! And free shipping to boot! The product shipped same day and arrived on a couple days later. Absolutely perfect!


25
141
Show More Reviews

See what our Experts say about this Spectro Wiring

  • Black Molded Fender Bracket for Clearance Lights Not Long Enough for 10 Inch Wide Fender
    There isn't a longer version of bracket # A67BB but what you could do is use some wire loom, such as # 459075-1, to hide/protect the wire. Or you could likely find a small diameter plastic tube that you could cut in have (lengthwise) to get a semi-circle to extend the length of the bracket.
    view full answer...
  • Does Tekonsha 4-Pole Wiring Harness 118786 Fit 2018 Jeep JL Wrangler
    Tekonsha's Fit Guide confirms wiring harness # 118786 as a fit for your 2018 Jeep JL Wrangler. You can double-check before ordering if you like by comparing the included photo that shows one of the harness' custom connectors to the connectors at your Wrangler's tail lights. Installation should take about an hour or less and you can refer to the linked wiring installation article and video for guidance. I recommend adding protective wire loom # 459075-1 to your install; this is sold by...
    view full answer...
    Image 1 for
  • Brake Controller And 7-Way Connector Recommendation For 2003 Subaru Forester
    The Tekonsha Brake Controller, part # 90195 is a great brake controller for your electric brakes on your travel trailer. Since you said your 2003 Subaru Forester has the 4-way connector at the rear of the vehicle, the Universal Installation Kit, part # ETBC7 will work well for you. The additional 4-way connector will not be necessary. I have attached a link to an installation video for you. I can certainly understand the concern with running wires where they are subjected to the harsh...
    view full answer...
  • Installing Tekonsha Primus # TK90160 Brake Controller on 2014 Chevy Suburban
    The 2014 Suburban doesn't use a plug like the 2014 Silverado 1500 does, it will wire directly into the tow package wiring like the 2008-2013 GM trucks did. If you look at the FAQ article I've linked you to, you can see the Primus would wire up to the tow package wiring located under the dash. I've also linked you to an install video showing a controller being installed on a 2008 GMC Yukon. Although the vehicle is different, the install procedure would be just about identical. The wiring...
    view full answer...
  • Mounting Options for 4-Pole Connector on 2010 Mazda CX-9
    I have just returned from the warehouse and have looked at the actual hitch. The hitch does feature the mounting plate and is exactly as shown in the photo. The easiest method would be to keep the connector in the cargo area until needed. When you are towing, you can run the wire out the rear door and close the door on it. The weatherstripping around the rear door is thick enough that the wires will not be damaged, as long as you avoid the area around the latch. This method provides the...
    view full answer...
  • Video of Converting Trailer Wiring 4-Way to 7-Way for Ford F-150
    I think I found the video you are referring to and attached it to this page. Basically it shows how to convert the 4-way of a 2013 Ford F-150 to a 7-way and activate the 12 volt power circuit. The adapter used in the video is part # 37185. Other parts used in the video: # 10-1-1 10 gauge wire sold by the foot # 05732-2 for butt end connectors # 459075-1 for wire loom # 11755 for dialectic grease # 7012A for 30 amp breaker
    view full answer...
  • Bypassing Trailer Wiring After Squirrels Ate Through It
    It probably does run through the frame but to get a wiring diagram or other technical information you would need to contact the trailer manufacturer. The easiest thing to do is to just run a new wire or wires and bypass the old wiring. There could be further damage that is unseen. For brake wire I recommend # 10-1-1 which is sold by the foot. For the lights I recommend # DW04923-1 which is jacketed for additional protection from vicious North American Red Tailed wire munching squirrels...
    view full answer...
  • Front And Rear Quick Connects For Winch On 2010 Ford F-250 Crew Cab
    I spoke with my contact at Superwinch about installing a front and rear quick connect on your 2010 Ford F-250 Crew Cab. The Trailer and Vehicle Electric Winch Wiring Kit, part # BDW20207, is intended to be for the rear quick connection on your truck for the winch. The 24 ft of wire should be enough for your truck. On the installation you will run the positive line from the quick connect to the circuit breaker you said came with your winch. To secure the quick connect to the rear of your...
    view full answer...
  • Recommended Base Plates and Flat Tow System for 2015 Jeep Wrangler
    For your 2015 Jeep Wrangler to use the Tow Defender # RM-4750, you will need the Roadmaster EZ4 Base Plate Kit - Removable Arms # RM-521448-4. This combination will work well with the Roadmaster Nighthawk All Terrain Tow Bar w/ LED Lights # RM-676. Then you will need a wiring kit for your Jeep. I recommend the portions of the Roadmaster wiring kit # RM-15267 that aren't already integrated into your tow bar. These parts are female spade # RM-300115-00, 3 feet wire loom # 459075-1, 30...
    view full answer...
  • 4-Way Connector to Power Motorcycle Trailer Lights
    To power up the lights on your motorcycle trailer, you would want to use 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire # A20WB. This harness has all the wiring necessary to empower each of the lighting functions on your motorcycle trailer. I also recommend using wire loom # 459075-1 and ring terminals # 44-5310A to make the installation an easier process, as well as 4-way connector cover # C58200 to protect it from being damaged.
    view full answer...
  • Parts Needed to Install Westin Off Road Lights
    Thanks for your purchase of the Westin Sportsman Grille Guard # 40-3825 for your 2017 Toyota 4Runner! In order to install the MaxxTow Off-Road Lights # MT80637-2 on the grill guard you need a power source, wiring, a switch, and some connectors. For the power source I do recommend using the Firestone Fuse Circuit Tap Kit # F2526 because it will help to protect your wiring. If you don't go this route then you'll have to place a fuse or circuit breaker on a power wire that's hooked up to...
    view full answer...
  • What Is the Largest Wire Loom Available?
    3/4" is pretty large, the closest we have to 3/4" is the Wire Loom # 459075-1 which has a 1/2" diameter and is sold by the foot.
    view full answer...
  • Are There Any Trailer 7-Way Cables With 6 or 8 Gauge Wire Available
    The trailer 7-way cables that we currently offer are going to max out at 10awg so you would need to get just the connector, like part # A7WCB, and wire it yourself with 8awg or 6awg. To protect the wires you can use some 1/2" wire loom # 459075-1 and wrap it all with electrical tape.
    view full answer...
  • Trailer Hitch, Brake Controller, And Wiring Recommendation For 2014 GMC Savana Van With No Tow Pkg
    I will start with the trailer hitch for your 2014 Savana. From my research I found the Savana can tow a trailer up to 10,000 lbs. The trailer hitch I recommend is the Draw-Tite Ultra Frame Trailer Hitch Receiver, part # 41946. This is a Class V hitch and has a 2 inch receiver opening. You might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
    view full answer...
    Image 1 for
  • Preventing Damage to 4-Way Connectors on Trailers Used by Many People
    There are a few solutions I can think of. First I will list some parts that you may find useful then explain some of the ideas I had. We offer a weather proof junction box, part # 38656, that would allow people to make hardwire connections without cutting your 4-pole connector off. We do not carry any heavy coated wire, but we do carry wire loom that might make cutting a bit more difficult like part # 459075-1. The best solution for preventing cutting I could think of is using flexible...
    view full answer...
  • Heavy Gauge Wiring For Lighting Functions on Trailer
    The 4 pole wiring harnesses we offer for trailers are pretty consistent when it comes to the wire gauge. The right turn/brake, left turn/brake and running lamp circuit wires are typically 18 gauge and the ground wire is typically 16 gauge. This is pretty much industry standard. However, the Hopkins Easy-Pull harness, part # HM38136 has a design that will eliminate the typical failure point of a 4 pole trailer harness, which is the point where the harness meets the plug. The plug features...
    view full answer...
  • Recommended Wire Loom for Parallel Multi Conductor Wire
    For the # SWC4332-1 you can use the Wire Loom, 1/2" Diameter (per Foot) # 459075-1. This is sold by the foot so you can get exactly what you need. Since I'm guessing you don't want to drill into your galvanized frame, I would try zip ties to keep it secure.
    view full answer...
  • Electric Brake Conversion from Air Brakes on 15,000 lb Axle Trailer
    The Dexter Electric Brake Kit w/ Cast Backing - Self-Adjusting - 12-1/4" - Left/Right Hand - 15K # 23-446-447 will fit any 15K axle that have the standard 7 bolt mounting flange. These are self-adjusting brakes so there is no need for manual adjustments after the initial installation. They are labeled left-hand (driver's side) and right-hand (passenger's side) to ensure proper placement. If you need the mounting hardware, I recommend # BRKH122510 for each axle. You will also need...
    view full answer...
  • What Size Clamp to Use for 3/8" and 1/2" Size Wire Loom
    You should be able to use the same size clip as the inner diameter of the wire loom. For example, the 3/8" Diameter Wire Loom # 39035 has grooves in it that would allow you to use a 3/8" inner diameter clamp. Same thing goes for the 1/2" Wire Loom # 459075-1 or # 459075.
    view full answer...
  • Recommended Brake Controller And Components For 2015 Jeep Wrangler Unlimited
    The installation of a brake controller like the Tekonsha Prodigy P2, part # 90885 on your 2015 Jeep Wrangler Unlimited should be very similar to the installation of a brake controller on a 2013 Wrangler as in the attached video. The # 90885 is our most popular brake controller because it is easy to install and operate. You will need the Universal Installation Kit for Trailer Brake Controller, part # ETBC7. Some of the other items used for the installation are the no-drill bracket, part...
    view full answer...
  • Air-Lift Compressor Install Location on a 2010 Ram 2500
    My Air Lift rep has the same exact compressor kit on his truck (# AL25980), and he installed his compressor on the inboard side of the truck frame under the cab. If you have a 2 wheel drive 2010 Ram 2500 you would want the # AL88297 and for the 4 wheel drive model part # AL88295. Either kit will have more than enough air line for the job as this kit was designed specifically to fit your vehicle. To protect the lines you could use wire loom like part # 459075-1 sold by the foot.
    view full answer...
  • Best Protective Wire Loom for Installing Cargo Carrier Light Kit 98174LED
    To install the cargo carrier LED Light Kit # 98174LED I suggest you use the 1/2-inch wire loom # 459075-1. This is the largest size we offer and it will make installation a bit easier. It is sold by the foot. Some extra zip ties # DW05724-10 might help too.
    view full answer...
  • ETBC7 Kit Without the Hopkins 4-Pole to 7-Pole Adapter
    Though there is not a kit with everything but the Hopkins # 37185, we can get you everything you need from the # ETBC7 so you won't have to spend money on a part you don't need. Start with Wiring Kit # 5506, which has 25' of wire, 20-, 30- and 40-amp circuit breakers, butt connectors and ring terminals. You'll also want a pair of Quick Splice Wire Connectors # SWC501746-1, four self-tapping screws # 101131802 and one larger self-tapping screw # FA1131822. Next, you'll need a circuit tester,...
    view full answer...
  • 7-Way and 4-Way Adapter for 4-Way Flat Connector on 2013 Ford F-150
    To convert your 4-way flat connector to a 7-way connector, I recommend the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole # 37185. This adapter will allow you to use both 7-way and 4-way flat connectors. Installation on your 2013 Ford F-150 will be similar to the 2010 that you referenced. The 4-way flat from the adapter plugs into the existing 4-way flat on your vehicle. The white wire from the adapter needs to be grounded to the vehicle's frame. The blue wire on the adapter will need to...
    view full answer...


< Previous



Do you have a question about this Wiring?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.