Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way
(173 reviews)
Price: $35.13
In Stock
Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way
Item # HM47570
Our Price: $35.13
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (173)
- Q & A (0)
- Photos
Hopkins Trailer Wiring - HM47570
- Wiring Adapters
- Multi-Function Adapter
- 6 Round
- 5 Flat
- 4 Flat
- Plug Only
- Hopkins
- 7 Round - Blade
Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids.
Features:
- Trailer adapter changes your vehicle's 7-blade connector to a 6-pole
- 4-Pole and 5-pole flat connectors also built in
- Quick-Change plug on 6-pole terminal accommodates both 6-pole trailer wiring codes - center-pin brake or center-pin hot
- Simply remove plug at base of connector, turn it around and plug it back in - no need to rewire
- Reinforced, easy-grip covers
- Open 180 degrees for effortless connections
- Internal seals for ultimate weatherproofing
- Rugged, oversize hinge
- Terminal grease packet included
- Works with 6-way, 5-way flat and 4-way flat trailer connectors
- 3-Year warranty
This adapter not only changes your vehicle's connector from a 7-way RV blade to a 6-way, 5-way or 4-way, it also has a patented Quick-Change wiring plug to accommodate both 6-pole wiring codes. Just remove the plug at the the base of the adapter, turn it and replace it to switch to a center-pin-hot design from center-pin-brake design, or vice versa. No rewiring necessary.
The heavy-duty, weather-resistant housing and covers on this adapter provide maximum durability. Even the oversize lid hinge is built to last, allowing the lids to open a full 180 degrees for simple connecting without breaking off.
47570 Hopkins Endurance Multi-Tow Adapter - 7 RV to 6 Pole (2 Wiring Codes), 5 Wire and 4 Wire Flat
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way - HM47570
Average Customer Rating: 4.9 out of 5 stars (173 Customer Reviews)
Heavy-duty trailer adapter features a unique Quick-Change wiring plug that lets you switch between 6-way wiring codes quickly and easily. Outlet for 4-way and 5-way plugs is also built in. Terminals are covered with easy-open, weatherproof lids.by: Dan Cleveland07/18/2018
My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors.
I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all.
I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.
by: GERSON S VALLES03/25/2013
I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!
by: Noel04/06/2024
Works great. I’ve had no issues whatsoe ver!
by: Steven04/03/2024
Just what i needed.
by: Shane 04/07/2023
This is the best all in one connector for your 7 way wiring harness. It allows you to use pretty much every connector for personal vehicle trailers.
by: John 02/26/2024
Item as described. Delivered when promi sed
by: John P. (JP)10/13/2017
PERFECT ITEM... NOT ONLY DOES IT WORK FOR MY SPECIFIC APPLICATI0N... BUT GIVES ME OPTIONS TO HOOK UP MOST ANY TYPE TRAILER WIRING...
by: Roy 12/11/2021
Just what I needed to be able to connect virtually any trailer to my vehicle. Price is good, shipping $ were reasonable, and product was received quickly. etrailer is my first choice for all things towing
by: Michael09/06/2019
This trailer connection works as advertised. The best thing is the reversible switch apparatus which allows one to go from one type of connection, i.e. 12-volt, to a pole for brakes. It's nifty.
Michael N.
9/7/2020
I have used this product several times during the past year of ownership. Works great. Really handy.
by: Jesse P02/20/2017
This product really is just "plug-and-play". I have a 2012 Chevy Traverse with the strongest towing package available for that vehicle. It comes with a 7 way receiver. I tow a 1998 viking 2490 pop-up camper that came with a standard 4 pin which I rewired to a 6 pin round adapter so that I could add a battery to the trailer and charge it while I was going down the road. It works great! No problems whatsoever. This is actually the second HM47570 that I have owned because I backed the first one into a high snow bank and broke it.
by: Spence01/24/2021
This is truly an all in one hitch plug adapter. I help several neighbors from time to time, pull many varied trailers, on a highly trafficked recreational river. I haven’t found a trailer plug I can’t plug into this adapter. And it’s parts are holding up well after a year. One and done! You’ll need a 7 pin hitch receptacle and then you’re covered for 7 pin, 6, 5 ( yes, the 5 pin), and 4 pin plugs. Bought a couple more for neighbors that had 7 way plugs on their vehicles.
by: Joe 09/18/2019
This has to be the coolest adapter I have ever owned. I needed to tow a boat with surge brakes and needed power from the reverse lights to prevent the surge brake from locking up the trailer while backing. I was not sure this would work but thought I would give it a try. It is a little larger than expected and felt like it sagged down a little when plugged into the truck. However, the spring door caught the top of the adapter with no problem. I plugged my 5 flat plug on the trailer and and put it in reverse. worked like a charm. I checked with a multi meter and indeed 12v were sent to the 5th plug on my 5 flat when in reverse. I can now pull three trailers I own with this one adapter. I have a 5 flat, 4 flat and 6 round plug on each of the three trailers. If a purchase a trailer with electric brake, you can pull the plug, turn it 90 degrees and plug it back in. Watch the video etrailer produced describing this outstanding adapter. I will be ordering a second as a backup. Oh....just towed a trailer 250 miles and the adapter was still secure in the truck ever though it sagged a little.
by: Rick J05/16/2017
This little unit is a must if you ever rent or borrow a trailer. It'll get you through any trailer connector need. As always, the purchase and shipment from etrailer were awesome.
Rick J.
5/17/2018
Thank you for checking in. I am still happy with my purchases - Ive had occasion to use my Hopkins adapter several times. We own two now, and theyve never given us a moments trouble. Great item to have in the console of every potential tow vehicle.
by: Garbage Man05/31/2019
This trailer plug adapter is a "must have" item if you have a truck set up for Hot Shot or if you pull several different types of trailers. I use this adapter at least 3 times a week (plus I have 7 round pin plug for hauling agriculture trailers). I haven't had to use the "trailer break reversal" wire yet, but this is the main reason to purchase this adapter. This is a well built, Great product, well worth the money.
by: Ron (The Boat Doc ) 10/31/2011
Being a former boat dealer, now a fisherman, and a rancher, I back-up to, and, tow a lot of different stuff. This lets me make sure my hook-up is "legal" with lights!! The ball mount works great with my NEW tow vehicle!! The vehicle is a 3/4 ton, and, comes with a 21/2" to 2" adapter for the factory receiver. The locks & the rest are just niceties in this "steal whatever you need" society?!!
by: Andrew 05/09/2020
My stock plug has a pretty tight cover that bends the wires on my flat plug for my utility trailer a bit too much for my comfort and this one just flips up and snaps closed, so no tension when it is open. Works very well for my wiring and I have many options for plugs than I had to begin with. I use this all the time and it is great!
by: Mike05/12/2014
As advertised. Well made too. The spring for the cover/seal is robust and I don't expect it to weaken. The adapter works perfectly with my Pollack 7 pin outlet and captures on the retaining clip as both are desiged, so the adapter is securely in place down the road.
The ability to reverse polarity on the 6 pin trailer brake set up is really nice, but I suggest to have a pair of needle nose pliers handy to stuff the wires back in the housing so you can get the two terminal plug re-inserted. A bit to fiddle with, but once you set it up for your own trailer, you never would mess with it again. Good product. You wont be disappointed.
by: Richard L06/18/2019
This adapter sold by etrailer.com solved my wiring problem pronto ! My "new" 2012 Buick only had a 7 point RV plug. I needed a 4 pin trailer outlet. Did not want to rewire half the car to get one. Vanessa at etrailer knew immediately what the fix was. Adapter worked as advertised. Problem solved. Great customer service !
by: GERSON S VALLES03/21/2013
I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend!
by: DAN CRULL11/23/2016
NOW THIS IS PERFECT FOR HOOKING UP AN EXTRA LIGHT AND OR DISCONNECTING BRAKES REAL FAST IF THERE IS AN ISSUE GREAT ITEM AT A GREAT PRICE
Dan C.
11/23/2017
works great , use it all the time
by: TJFREEDOM06/24/2016
This is the adapter that I have been looking for. I was skeptical at first as I deal with vintage utility trailers. These types of trailers have heavy long metal cylinder 6 plug connectors and the fear of keeping them from falling out (along with the adapter is huge. The heavy conductors fit nicely into the adapter. I tie a couple of small ball bungees around everything just to be safe. My only complains is that I wish they were Made in America!
by: Dr. Bob01/05/2017
Perfect for trailering my boat (5 flat plug). FINALLY resolved my issue with trailer brakes locking up in reverse. Appears to be well made as I have used it for a year and still works fine.
by: Steve B.04/08/2017
This thing is a beauty, if you have a 7 pole trailer wiring kit, this is a must have. You will never need another set of adapters because you're covered from 4 pole to 6 pole with the adapter and 7 pole when you remove it. Can't go wrong, great quality and the reverse mode for hot circuit/trailer brakes is a great touch. 10/10
by: James B06/28/2015
Looks like this is what I need, personnel's expertise helped me determine my needs. Have not tried it, but everything seems to line up and looking forward to the final results.
James B.
6/27/2016
Great product, works adapter.
by: Randall 01/20/2021
I have other Hopkins Multi-tow trailer adapters. I like that this one can operate both 6 way types. Whether it was the brake used or neutral. All you have to do I remove the piece and flip it around. You do not need two adapters.
25
173
Show More Reviews
See what our Experts say about this Hopkins Trailer Wiring
- Recommended 6-Pole To 7-Way Trailer Connector For 1999 Ford F-250 Super DutyIf you have a 6-pole connector on your 1999 F-250 I recommend using the Hopkins 6-Pole to 7-Pole Trailer Wiring Adapter, part # 47435. You simply plug this into your 6-pole when you want to tow the gooseneck and you have a 7-way connector to use. The 7th pin is likely a reverse light circuit that likely is not used so you should be good to go. If you have a 7-way on your truck and need a 6-pole to tow a trailer then you can use part # HM47570.
view full answer... - Brakes on Horse Trailer with 6-Way Lock Up When Connected to the 7-Way on Ford F-250A 6-Way round pole connector can be wired one of two ways; with the center pole as the 12 volt hot lead, or as the brake. Since the trailer brakes on your horse trailer lock up when plugged into your F-250, it sounds like the 7-way to 6-way adapter that you are using is wired opposite from that of your trailer. This would mean that the center pin on your trailer is the 12V hot lead and the center pin on your adapter is for the brake or vice versa. Either way the brakes are receiving constant...
view full answer...
- 7-Way to 6-Way Adapter Recommendation for 2017 Ford F-250Sounds like you need an adapter to go from the 7-way on your to a 6-way. For that you would want a Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570.
view full answer... - Trailer Turn and Brake Lights Not Working with 2018 Nissan Pathfinder Your 2018 Nissan Pathfinder does require a couple of blue relays to be installed to fully activate the tow package so that the turn/brake signal lights work on the trailer when connected. The relay harness on your Pathfinder gets plugged into a factory port at the rear of the vehicle behind some paneling on the driver side. I have attached an installation video that you can use for reference where we use the Tekonsha T-One Wiring Harness # 118670, which includes the needed relays. The...
view full answer... - Does Hopkins Endurance Multi-Tow Trailer Connector Adapter, # HM47570 Come with a Mounting BracketThe Hopkins Endurance Multi-Tow Trailer Connector Adapter, # HM47570, is meant to plug into a 7-Way trailer connector that is already mounted on the back of a vehicle so it does not come with a bracket. The Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector, # HM48470, does come with a mounting bracket. The only difference between this connector and the first one is that it does not have a 6-Way function. I have included a link to the installation details for this connector...
view full answer... - Recommended 7-Way Trailer Connector Adapter For 6-Way, 5-Way, Or 4-Way Trailer ConnectionFor your 2016 Chevy Suburban 1500 LS with towing package, I recommend the Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way # HM47570. This single adapter will give you a 6-way round, a 5-way, or a 4-way trailer connection. This adapter also has the ability to adjust for the 2 different style wiring of 6-way trailer connections with an easy to use integrated adapter to use the center pin for 12V or electric brake use. I've attached a video to help.
view full answer...
- Troubleshooting Trailer Brakes Locking Up When Using Hopkins 7-Way to 6-Way AdapterSince you have the Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way # HM47570 this should be an easy fix. The bottom of the adapter has the Quick-Change wiring plug to switch the 6-pole wiring codes. Remove the plug , turn it and replace it. This will switch to a center-pin-hot design from center-pin-brake design, or vice versa. If for some reason that doesn't work, I would go ahead and add a new 7-way plug to the trailer wiring. You can use a connector...
view full answer...
- How to Connect Horse Trailer with 6 Way Connector to 7 Way Vehicle PlugTo start, the colors on the trailer really isn't reliable since someone may have changed the wiring at some point; you'll need to test each circuit individually to verify which function it carries and work from there. I'm attaching a diagram of the typical wiring for a 6 way connection that you can cross reference and determine if your wiring matches up. The difference between a 6 way and 7 way connection is that a 7 way connection has a circuit for the reverse lights on the trailer. Now,...
view full answer...
- Replacement 4-Way for 2007 Ford F-150 with Functioning 7-WayIf the 7-way still works one easy solution is to use the part # 118384 which will plug inline with your 7-way and give you a functioning 4-way. Or you can plug in the adapter part # HM47570 to the 7-way which will then allow you a 4-way.
view full answer... - Why are My Brakes are Always Activated with a 6-Way Connector and a Curt Brake ControllerThere are actually two different ways they will wire 6-ways. Basically the difference is between where the 12 volt power source is relevant to the brake output circuit. The only difference between one setup and the other is that the 12-volt power and brake output circuit is swapped. So all you should have to do is swap the brake wire with the power wire and everything should work fine.
view full answer...
- How to Determine the Wire Functions on a Trailer to Install a 7-Way Blade ConnectorThe first thing you are going to want to do is determine the function of each of the wires. You cannot go by color alone because there is no standard color code. There are 2 ways that you can determine the wire functions on the trailer. First you can trace each wire back to see where it goes. The other way is to attach each wire, one at a time, to a separate car battery and see what function turns on. Once you have determined the functions you will wire in a 7-Way as follows: If looking...
view full answer... - Recommended Replacement Trailer Connector For Using 7-way And 4-way SimultaneouslyOn your 2012 Ram 3500 SRW Crew Cab with factory brake controller, you can use the Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way # HM47570. This will allow you to use both functions simultaneously. If you want to use a 7-way and 4-way simultaneously, I recommend replacing your side by side trailer hitch connector with the Hopkins Endurance Multi-Tow 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End # HM40950 which will plug into your factory...
view full answer... - Can a Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570 Be Used Both a Ford and GMCAs long as both the Ford and GMC that you are planning on used this Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way # HM47570 are both equipped with a 7-way blade style vehicle connector you can use this adapter on either vehicle. If your vehicles do not have an established 7-way blade style vehicle connector please feel free to reply to my e-mail with the year, make, and model of either or both vehicles; and I would be happy to make recommendations...
view full answer... - Recommended Wiring For Camper 6-way And TrailerFor your 2015 Ford F-150, I recommend the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 41157. This will give you a second 7-way in the bed of your truck while still allowing the bumper 7-way to function. For your truck camper 6-way, I recommend the Hopkins Endurance Multi-Tow Trailer Connector Adapter - 7-Way to 6-Way, 5-Way or 4-Way # HM47570 to adapt from the 7-way. This will allow your bumper connection to be used for your trailer.
view full answer... - Trailer Brakes Lock Up when Plugged Into 2002 Chevy Silverado Using 7-Way to 6-Way AdapterThis problem is occurring because there are 2 different ways that a 6-Way trailer connector can be wired. The center pin will either be electric brake output or the 12 volt circuit. The adapter you are using must be set up for the opposite way that the trailer is set up. So what is happening is the 12 volt circuit on the vehicle is connecting to the brake circuit on the trailer side. As soon as you plug it in the brake lock up. Happens all the time. You will need a different adapter,...
view full answer... - Adapting a 7-Way on a 2003 Chevy Silverado to a 6-Way Round Trailer Connector on Big Tex TrailerIf your 2003 Chevy Silverado has a 7-Way connector I recommend keeping the 7-Way that you have # 54006-059, and using it to replace the 6-Way on the trailer. A 6-Way is not nearly as common as a 7-Way blade style connector. You just have to determine the functions of the wires on the trailer and wire them to the new 7-Way accordingly. The functions on the 7-Way should be as follows: White Wire = Ground Red Wire = Left Turn and Brake Brown Wire = Right Turn and Brake Green Wire = Tail...
view full answer... - Wiring Adapter to Convert 7-Way Blade RV Style Trailer Connector to 7-Way Round Pin StyleWe do have a wiring adapter for you to match up your truck's 7-way blade style connector to your trailer's 7-way round-pin type. The linked page will show you all such items which are offered in 1-foot overall lengths like Hopkins # 47595.
view full answer... - Running Light Circuit Blows on 2001 GMC 3500 Using 7-Way to 6-Way AdapterAlso you will want to make sure that the trailer connectors on the vehicle and trailer are clean and free of corrosion. Also make sure that there are no frayed wires from the trailer connector to the tail lights because there could be a short causing the whole issue. Also make sure the main trailer connector ground and the grounds for all of the lights are attached to clean and corrosion free bare metal surfaces. There are 2 different ways that a 6-Way connector can be wired. The center...
view full answer... - 7-Way and 4-Way Trailer Wiring Kit for 2020 Mercedes Sprinter with Factory WiringWhat you have found is a USCAR style connector that was designed for the standard trailer 7-way so all you need to add a 7-way and 4-way is the part # 30955 which plugs right into this.
view full answer... - Troubleshooting No Signal on 2015 Silverado 2500 Blue Brake Wire on 7-Way Using AdpaterFirst, you can remove your adapter and test your 7-way directly to see if there is a signal on the appropriate pin. Often a blue wire is used for the brake controller's output signal and in a 7-way RV-style connector this corresponds to the pin at the 5-o-clock position as you look at the vehicle socket. Please refer to the linked photo. Your truck may require some wiring connections under the hood in order to activate the 12V power feed to the brake controller and the 12V auxiliary feed...
view full answer...
- Hopkins Agility Brake Controller Shows No Trailer Connected and Trailer Brakes Lock UpIt is possible that you have the controller mounted outside the approved range per the instructions, see link. If the controller is tilted to the left or the right, or the controller is more than -20 degrees nose down or more than 70 degrees nose up, the internal inertia sensor inside may be incorrectly reading your braking activity and sending too much power to the trailer brakes. You may also have an open circuit on the brake circuit. This could mean that there is corrosion in the trailer...
view full answer... - Recommended 7-way Blade to 6-pole Round Adapter with Hot Lead in Center PinIf you have the Hopkins # 47549 that you referred to in your question you should be able to open up the adapter and repin the two wires to swap the function. Since there are two standards of wiring a 6-way in the market they made this feature available to do. If you would prefer to just purchase a 7-way blade to 6 pole adapter that is already prewired for your type of horse trailer you will need the Hopkins # 47525. Another really neat option is the Hopkins # HM47570, this adapter lets...
view full answer... - Trailer Brakes Lock Up when Connected to 2014 GMC Sierra 2500HD with OEM Brake ControllerYour 2014 GMC Sierra 2500HD has an industry standard 7-Way trailer connector. It is possible that the one on your trailer is not pinned out to match. In other words it may have the 12 volt circuit switched with the brake output circuit and that would be why the brakes lock up when you plug in the trailer. I have included a picture that shows the way a trailer side 7-Way should be pinned out. Ignore the wire colors though and focus just on the functions. There is no industry standard for...
view full answer...
- Adapter for 4-Way Flat Vehicle Connector to 6-Way Round Pin Trailer ConnectorIf you only need the basic lighting functions provided by the 4-Way (left/right turn, brake, and running lights) all you will need to do is plug the 4-Way end of the Adapter 4 pole top 6 pole, # A10-6034VP, into your vehicle 4-Way. The trailer 6-Way will then plug into the 6-Way receptacle on the adapter. You will also need to ground the white wire on the adapter to the vehicle frame at a clean and corrosion free metal surface. The remaining wires (blue for electric brakes and black for...
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Kathleen M
Video by:
Alan C
Installed by:
Shane T
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roy
12/12/2022
After a year, the wiring kit is still 100. Have used it several times on both personal and rental trailers