3-1/2" Diameter round. Waterproof LED light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate housing and lens. Surface mount with built-in flange. Accepts 2-prong PL-10 plug. PC rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an Optronics Round LED Clearance Side Market Light. This sonically sealed, waterproof LED marker and clearance light is a really great design. It's a nice addition to your trailer. It is an LED system. So LED's make great replacements for incandescent lights. LEDs last longer.
They burn brighter, so they put out more light. And they're much more efficient. They don't have as significant of a power draw compared to incandescent bulbs.Also, with LEDs, you don't have to worry about replacing bulbs. And you don't have to worry about brittle filaments. Now on the back side here, it has a two prong connection for a weather tight plug.
It does require a two port plug for connecting here at the back. And that is sold separately. It's not included. This unit's an amber polycarbonate lens. It's a really strong, durable design.
It has the black mounting flange with three mount holes for installation. Mounting hardware not included. It is a recessed mount installation. So you will need a hole cut out at the installation surface for this to fit into.It looks like you're going to need a 2 3/4 inch diameter hole. It is SAE and Department of Transportation compliant.
The overall diameter is about 3 1/2 inches. The diameter of just the light is about 2 1/2 inches. That's just the lens area. The mount holes on the unit are separated on center by 2 5/8 inches. We're going to go ahead and hook it up to power that way you can see what it looks like with some power running to it. And then we'll also be able to turn off our overhead lights so you can see it in a lower light setting.Now you can see that this light sends out a nice, clear consistent signal. It's a very good looking light. It contains a total of seven LEDs. There's seven diodes. So the multi-diode design really helps optimize the overall light output. The power draw at 12.8 volts is 0.057 amps and Optronics puts a limited lifetime warranty on all of their LEDs.That's going to do it for today's look at the Optronics Round LED Clearance and Side Marker Light.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
3-1/2" Diameter round. Waterproof LED light functions as both a clearance light and a side marker light when properly mounted. Durable polycarbonate housing and lens. Surface mount with built-in flange. Accepts 2-prong PL-10 plug. PC rated.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.