Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(108 reviews)
Price: $215.45
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75112
Retail:$377.98
Our Price: $215.45
You Save: $162.53
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (108)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75112
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 500 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75112 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87008 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2001 - 2005 Ford Explorer Sport Trac
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Too difficult to install
- Wrong item was ordered
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75112
Average Customer Rating: 4.8 out of 5 stars (107 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Steven 05/10/2024
I having nothing but great things to say about Etrailer. My purchase was delivered promptly and the installation instructions were thorough. Good pricing as well. Thanks.
by: Daniel 02/18/2024
Well I sold the truck about a month after I put it on so I never used it BUT the installation went smooth
by: Fred 2005 SportTrac05/13/2024
2005 Ford Explorer Sport Trac
The product arrived on time. The installation instructions say you need a 13/16, a 7/8 and a 15/16 wrench. It was actually a 3/4 for the nut on the carriage bolt, the 7/8 was not needed. I actually used a 1/2in drive 3/4 and 13/16 in socket along with the 15/16 wrench. The install time was about an hour. This was a 2005 SportTrac.
A few notes on the install process:
1. Perhaps removing the spare tire would give a little more room to allow for easier access.
2. On the passenger side the 3/8 spacer block has a bevel (both do), the bevel should be positioned towards the frame and towards the rear of the vehicle, this allows for the bolt to slide in the slot and align properly with the hole in the hitch.
3. Unplug the wiring harness at the rear of the vehicle on the driver side, this gets them out of the way so you can maneuver the hitch freely.
Thanks,
Fred
by: Erik 10/31/2023
2004 Ford Explorer
Easy install and great fit on my 2004 Ford Explorer Sport Trac pick-up!
by: William05/29/2019
Ford
I bought a boat too big for the bumper hitch on my ford sport trac. The hitch bolted right onto the frame my son even helped me with it. I now can tow my boat with ease and confidence. No need to buy a new truck cause I just saved a boatload of cash by getting a new hitch rather than a new truck
by: Gary07/03/2017
2001 Ford Explorer Sport Trac
Product was as described, everything lined up perfectly and it seems very well made and very strong. Delivery was fast, also. So far I'm very happy with my new hitch and the service from etrailer.
by: Harry09/07/2023
Excellent shopping experience, shipping and delivery! Would have been on time but we had Labor Day holiday! Otherwise from ordering to delivery everything was excellent!Now to the install! Great instructions so it should be ok! Thank you!
by: Richard06/19/2018
Through no fault of Etrailer arrived late. Had scratches from poor handling (UPS). Installed myself in about 30 minutes. Worked perfectly and looks great. See photo of install on my 2003 Sport Trac. Thanks for the video it helped a lot.
by: Jim 07/19/2023
Ford
I was very impressed. I ordered a hitch system for a 2001 Ford sport Trac. The unit ordered straight to my frame as per instructions and I had no issues. It was perfect.
by: David04/13/2012
1994 Ford Explorer
Ordered Saturday for my 1994 Ford Explorer Sport Trac. It was at my front door on Wednesday! I took it out of the box, and with my wife's help, had it installed in about 30 minutes using a crescent wrench, socket wrench & torque wrench. Perfect fit, couldn't be happier!
by: Jeffery 05/12/2023
Worked out great. Our only issue was with our truck, not the hitch. The hitch itself installed well, looks great, and is performing without a problem.
by: Ramon01/23/2021
The package arrived a day early. It was very simple to install and instructions are easy to follow. The video provided was very helpful as well. Highly recommended. I will be using it to tow a small pop up trailer.
by: Cliff05/08/2023
I love your service and the products you handle. I finally installed my hitch and everything went smoothly. Great hitch, great fit and am looking forward to many years of service. I have never been disappointed with your products or service. Thank You.
by: John09/14/2018
2005 Ford Explorer Sport Trac
I put it on today by myself, would have been faster with two people. Every thing lined up nice. And looks great, very heavy duty. I put it on a scale. It weighed 43 lb. It's a little close to the rubber on bumper, but no big deal.
by: Jack2of312/28/2018
2003 Ford Explorer Sport Trac
Two people named Jack and one car Jack and about 30 minutes and ready to tow.
by: 89badger10/16/2016
2002 Ford Explorer
I installed this on '02 Ford Explorer Sport Trac. While I didn't set the record for the quickest installation (or even come close), the installation was simple enough. I am pleased with the quality of the hitch; the welds are of good quality and the coating is also good. You can buy a cheaper hitch, but with this one you will feel confident that you have a quality hitch on your vehicle.
I used it to pull a trailer from WI to AZ for a cross country move and couldn't be happier with how it performed.
by: Perry R.02/07/2020
2003 Ford Explorer
I purchased this hitch for, and installed it on, my 2003 Ford Explorer Sport Trac. This is a robust, well-made, heavy duty, hitch which was a perfect fit and which has served my towing needs very well. Installation was easy, although I wouldn't recommend installing it by yourself or without the aid of a lift, both of which I did. I would not hesitate recommending this hitch to anyone considering purchasing one for a similar vehicle.
Perry R.
2/7/2021
Still working perfectly. It has been used and perhaps abused but is a very sturdy hitch which serves its purpose very well.
by: Taylorsm06/24/2016
2001 Ford Explorer Sport Trac
Installation looked simple and we almost had it but our bumper was slightly out of alignment. Took it to our local mechanic who had the right tools and it was installed in minutes. We've been using it since then with our Hitch Rider Truckee Switch Rack to haul our recumbent trikes. We wish we had done this sooner! Thanks etrailer for an efficient website and prompt delivery.
Taylorsm
6/24/2017
Whenever I think about trading in our Sportrac, I remember that we have that great hitch on it! Its working out great for us.
by: William Bernard07/23/2020
2005 Ford Explorer Sport Trac
My hitch got here a day ahead of time and I want to thank you for the quick shipping. This is exactly what I wanted for my Sport Trax. This Curt hitch seems very well built and very sturdy. I would highly recommend etrailer.com products to everyone. Thank you for the great service.
William B.
7/23/2021
This hitch is awesome, has been used often. It was a great product the day it arrived and now a year later I still highly recommend this hitch.
by: Robert09/05/2022
2005 Ford Explorer Sport Trac
Draw-Tite #75112 2005 Ford Explorer Sport Trac: The 2 thick spacers (one used on each side) were too wide and had to be trimmed about 3/16" in order to fit properly between the frame and vertical hitch bar. Otherwise the mounting hole would not line up and the bolt would not slide through the opening. Fortunately I had a cut off wheel and was able to remedy the problem. The receiver hitch itself is of good quality.
by: Hans 07/03/2023
Oi! She’s a beaut! Does everything I ask her and was easy to install.
by: Coy H04/20/2017
Ford Explorer
I bought a hitch for my Ford Explorer SporTrac from Etrailer, as well as a super little electronic controller for the brakes a year ago The products are super, I have pulled a travel trailer at full rating with out a problem (I started to say I pulled it with out a hitch, but you can imagine those comments.) The products, and service was super from Etrailer!
To the Etrailer gang, ill be looking for hitches for a 74 Chevy pickup, and an 87 Ford Bronco before long, are you guys ready?
by: Jerry04/26/2018
2005 Ford Explorer Sport Trac
The product is the best. The installation was a bit of a pain, but that was because of the way my truck suspension setup. Took about an hour to install.
Jerry B.
4/26/2019
Its working very good.
by: Jeff 08/01/2022
2003 Ford Explorer Sport Trac
This hitch fit my 2003 Ford Explorer Sport Trac XLT perfectly. The hitch is super solid and very discreet. It went on fairly easy with a little help. Helpful tip: I had to jack one side of the truck slightly to release some pressure from the rear leaf springs which gave me a little more room to fit the hitch into place. I would recommend this hitch.
25
109
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Class III Trailer Hitch Recommendation for 2002 Ford Explorer 4 DrAccording to my research, the OEM hitch on your is integrated into the rear cross member of the vehicle, and is therefor not meant to be removed. I spoke with my contacts at Hidden Hitch, Curt and Draw-Tite, and determined that there are no spare tire compatibility issues with the hitches available for the 4 door Explorer. Of the given choices, I'd recommend the Curt Class III, part # C13550. It's meant to fit under the existing OEM hitch, and has the same weight capacities and install...
view full answer... - Recommended Trailer Hitch for 2002 Ford Explorer Sport Trac 2WDFor the Sport Trac model you will want the Draw-Tite Trailer Hitch # 75112. To complete your towing setup, I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And for trailer wiring use # 118344. For install details and some product demonstration videos, click the provided links.
view full answer... - Trailer Hitch and Wiring Recommendation for 2002 Ford Explorer Sport TracFor your 2002 Ford Explorer Sport Trac the trailer hitch I recommend is the Curt # 13407. The reason I recommend this over the similar Draw Tite that fits your vehicle is we just have better overall experiences with the Curt hitches in terms of quality. They are also made in the USA. Then for trailer wiring the Tekonsha part # 118344 is the best option that installs the easiest.
view full answer... - Can Small Boat Trailer Be Towed By 2002 Ford Explorer Sport Trac Using Bumper Mounted Trailer BallThat's a great question. Your Explorer Sport Trac is equipped with a towing bumper, with a 3500 lb capacity. If the rear bumper height is such that it's pretty close to the height of your trailer's coupler when it's jacked up and level, then by all means get you a trailer ball with the proper diameter shank to fit the hole in the bumper (likely 1 inch) and ball size (likely 1-7/8) and tow that boat and trailer. If the hole diameter is 1 inch, you can use # 19260 for a 1-7/8 inch ball or...
view full answer... - Availability of Replacement Hitch Installation Hardware Kit for Draw-Tite Hitch # 75112We do offer complete replacement hardware kits for all of the hitches we sell. Any time a hitch is installed (or reinstalled) it is essential to use new hardware since it is intended for a single use. All you need to do is enter part # RHK into our search box and click go. Select part # RHK and then enter the hitch part number 75112 into the field provided and select the Draw-Tite brand from the drop-down menu. I have linked for you the written hitch instructions, a video and a helpful...
view full answer... - Does Draw-Tite Trailer Hitch for 2001 Ford Explorer Sport Track Include Installation HardwareThe Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75112 referenced in your question, which is confirmed to fit your 2001 Ford Explorer Sport Trac, includes the hardware, bolts, washers and everything else needed for installation. I have attached an installation video on a 2002 Explorer Sport Trac as well as the written instructions for you to look at.
view full answer... - Parts Needed to Flat Tow a 2001 Ford Sport Trac Automatic Behind a Winnebago AdventurerWe have everything you need to flat tow your 2001 Ford Explorer Sport Trac behind your Winnebago Adventurer, but before attempting to tow I strongly recommend checking your owners manual before proceeding. From what I could find, the 4WD models with the electronic shift transfer case and automatic transmission cannot be flat towed. Ford also has distance and speed restrictions when flat towing this vehicle. To flat tow your 2001 Ford Sport Trac Automatic behind your Winnebago Adventurer...
view full answer... - Correct Replacement Hardware for Draw-Tite Trailer Hitch Receiver 75112 on Ford Explorer Sport TracWe do have the correct replacement hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75112 which is a fit for a Ford Explorer Sport Trac, it's the Replacement Trailer Hitch Hardware Kit part # RHK which is exactly what the trailer hitch would have came with when new. This will be everything needed to install the hitch again reusing the old receiver.
view full answer... - Troubleshooting Hitch for 2002 Ford Explorer Sport Trac That Was Bent During ShippingI was able to check your order and you did get the Draw-Tite # 75112 but sometimes hitches can get slightly bent during shipping. As long as the hitch is only slightly bent, this can be fixed by bending the hitch back into place; if yours isn't lining up I can almost guarantee that is what happened. Some people will use open steps for leverage, vices and even car jacks to apply controlled force to bend the hitch back. You will want to look for flaking paint and physical stress marks on...
view full answer... - Parts Needed to Tow a Trailer with Brakes Using a 2004 Ford Explorer Sport TracFor the Class III trailer hitch receiver I suggest the Draw-Tite # 75112. This is a custom fit 2 inch hitch receiver that will fit your 2004 Ford Explorer Sport Trac. The B&W Tow & Stow # BWTS10037B is a great adjustable ball mount that provides either 5 inches of drop or 5-1/2 inches of rise. It will also store under the hitch when not in use. Use locking hitch pin # BX8858 or standard pin and clip # PC3. If the Tow & Stow doesn't work with your setup I've linked our selection of...
view full answer... - Will Curt Class III Hitch Part 13407 Fit all 2001 Ford Explorer Sport TracCurt hitch 13407 will fit all 2001-2006 Ford Explorer SportTrac. You could also use Draw-Tite part # 75112. I've added a link to the instructions for both hitches so you can see how they install.
view full answer... - Class 3 Hitch Compatibility Between 2002 Ford Explorer and 2002 Ford Explorer Sport TracWe offer Class III hitches for both the Ford Explorer and the Ford Explorer Sport Trac, but unfortunately the Class III hitches advertised for the Ford Explorer are not compatible for the Sport Trac. However, we offer two Class III hitches that will fit a 2002 Ford Explorer Sport Trac. The Curt Class III Round Tube Hitch # 13407 and the Draw-Tite Max Frame Round Tube Hitch # 75112. I recommend the Curt Trailer Hitch Class III - 2" # 13407.This hitch is made in the USA and is a little more...
view full answer... - Replacement Hardware For Trailer Hitch On A 2004 Ford Explorer Sport TracThere are two options of trailer hitches that are confirmed for your 2004 Ford Explorer Sport Trac so first you will need to find out which one you currently have. There is the Draw-Tite Hitch # 75112 and the Curt Hitch # 13407. When you find out which one you have you will need to order the Replacement Hardware Kit # RHK. When you get to the hardware kit page you will see a box that asks for the hitch item number depending on which hitch you have you will have to type in the part number...
view full answer...
- Hitch Recommendation for my 2002 Ford Explorer SportFor your 2002 Ford Explorer Sport you will use the Curt Trailer Hitch Receiver part # 13540. This was custom designed for use with the Explorer Sport or two door model. The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75112 was designed for use with the Ford Explorer Sport Trac which was a slightly different model and will not fit your Ford Explorer Sport two door. If you'll be hauling a trailer use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part...
view full answer... - Can A 2001 Ford Explorer Sport Trac Tow A 5th Wheel TrailerI did some research and and the 2001 Explorer Sport Trac is not designed for fifth wheel trailer towing. Your Sport Trac has a very short bed which would cause clearance issues with a fifth wheel and it does not have the towing capacity that would be needed. A full-sized truck with a larger bed is recommended for fifth wheel towing. According to the owner's manual, you can tow with a rear bumper/frame mounted hitch. The towing capacity of your 2001 Ford Explorer Sport Trac is going...
view full answer... - Recommended Hitch for a 2003 E-450 Shuttle BusYes, there is! To add a hitch to your 2003 E-450 Shuttle Bus, I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver item # 41990-07. This is a universal hitch that can either be welded or bolted on to your Ford. There are no custom fit options available but we have had many customers install this hitch on E-450s. The Draw-Tite Hitch Receiver item # 41990-07 is a class V hitch with a 2" receiver. It has a massive 16,000 lbs capacity. This one comes with 7" mounting brackets...
view full answer... - Solution for Using Bike Rack and Cargo Carrier TogetherWe do have a solution for a bike rack and cargo carrier; your best option would be to use the Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier - 2" Hitches # Y34ZR because this has a 40 lb per bike capacity and the carrier has a 100 lb capacity, which suits your needs perfectly. The cargo carrier can also be removed from the rack and can be used on its own. This cargo box is enclosed. We also have this combination with an open cargo carrier Yakima EXO Swing Away 2 Bike Rack...
view full answer...
- Trailer Wiring Harness on a 2004 Ford Sport TracIf the connector you found looks like the picture I've attached, then you have a 4-way trailer connector. If you're still unsure, send me a picture of the connector you've found so I can see it. To find out if it functions properly, you'll need to use a circuit tester, part # PTW2992, and test each function; stop lights, turn signals, and running lights. I've linked a video on how to test with the # PTW2993. To the best of my knowledge Sport Tracs did not all come with trailer wiring...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Andrew K
Video by:
Alan C
Written by:
Lindsey S
Video Edited:
Joshua S
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
89badger
10/17/2017
Thank you for the follow up. I have owned that for 2 years now and I am still very satisfied with my purchase. I have recommended others to etrailer.com