To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (827 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Went to the dealership and they wanted $800 to activate the tow lights and another $400 for the trailer hitch receiver installed, for a grand total of $1,200! Purchased the Curt Trailer Hitch receiver for less than $120. Took half an hour to install the receiver and another half hour for the wiring harness. Saved almost $1,000 off the dealership price! A friend recommended etrailer and I am so glad he did!
Very easy to do business with. Will definitely be recommending you to people who want a hitches or trailer accessories.
Very difficult to install. Due to location of the protective plate around the fuel tank. I have a 2015 Jeep grand Cherokee limited with the eco diesel. I had to bend the protective “skid plate” with a sledge hammer to get it to fit. Also it is so tight to get the passenger side front bolt in. After using your finger toss to get the bolt lined up blind. With your finger tips you could rotate wrench 2” then flip it over and rotate another 2” all the way until it was tight. I am very mechanically inclined and this to 5 hours to install. Not necessarily the tire brackets fault as much as it is Jeeps fault for not mounting the fuel tank on center.
Ordered this for my 2019 Jeep Grand Cherokee Limited. Installation was simple. Per the instructional video I removed the 4 bolts from the rear frame area of the Jeep, laid out some cardboard to protect the coating on the hitch and my back from the concrete. Lifted into place and secured the bolts. I did this myself, though a second set of hands would have been nice for the initial bolt placement. I towed a small trailer with Kayaks twice last week and all is good! Though it's not integrated into the bumper like the factory hitch, it still looks good and is a lot less expensive. Don't forget the trailer wiring like I did.
A great hitch, easy install and super great finish
Very good price, arrived on time, and seems to be very sturdy. Installation was fairly easily. The R/T model has a plastic heat shield between the exhaust and spare tire that has to be removed to get the hitch in place. To reinstall the shield notches have to be cut out on ends where it meets the hitch mounts to get it back in place. It's held in place by six 10mm nuts and come out and back in easily enough once the notches are cut. With the hitch in place it is a very tight fit getting the spare back in place - I had to guide it and nudge it some while my son worked the winch until it cleared the hitch.
Keith B.
7/9/2018
After a year it is working great. The paint is holding up well and still looks brand new.
I needed a trailer hitch for my 2018 Jeep Grand Cherokee. The Curt trailer hitch receiver is a quality product and looks great. It’s a really good fit underneath the rear bumper. The installation literally took me less than 20 minutes.
I highly recommend this trailer hitch reveiver for easy installation and a good fit.
Ron R.
12/30/2018
The Curt trailer hitch receiver was an outstanding purchase and a great fit for my Grand Cherokee.
I did not remove the spare tire to install the hitch on my 2012 Durango although that made it difficult to get the wrench in position. The original bolts were painted and really tough to remove. I called a local mechanic and asked for advice. He suggested cutting a piece of pipe and inserting my wrench handle in that to extend the effective length of the wrench. The additional torque which that idea provided was enough to smoothly loosen the bolts. No hammering, torch, or paint thinner were needed. The hitch was easy to install after that.
Dave F.
8/31/2015
I am still using it with no issues. thanks.
I have a 2014 Jeep Grand Cherokee. This hitch just bolted in. It really helps to have a second set of hand only to help hold the hitch in place. Install is 10 minutes after you find your torque wrench. Great instructions.
Even better support from eTrailer.com
Brad
6/30/2013
How difficult was the wiring? Did ur jeep already have the wiring and you simply need to plug it in?
Bryan M.
5/9/2014
The hitch has been installed for a year and looks great and works great. The jeep had a factory wiring harness connector but not the factory plug. I purchased the plug and mounted it. The Dealer had to activate the plug and they did that at no charge. I bought the plug from the dealer.
Ethan
7/6/2014
Bryan- can you post a couple pics of what the install looks like from the back of your jeep? Trying to see how tight it fits to the bumper.
Bryan
7/9/2014
I will see what I can do to get the additional pictures of the rear mounting
Angel
8/4/2014
What sub model Jeep Cherokee do you have? I have a Summit and I am hesitant about ordering this hitch.
Rachael H.
8/6/2014
Haven’t installed the product yet, but the purchase process and prompt delivery was excellent. Their videos on installation are excellent.
I found etrailer on YouTube and watched a video showing, explaining and installing 3 different types of tow hitches for my Jeep Grand Cherokee Limited. Customer service was excellent, shipping was quick and cost of the hitch was about 100$ less than what the local business was trying to sell me. Thank you etrailer!
Wow, just WOW! I've never seen or experienced such great customer service while ordering ANYTHING! Your website made selecting,ordering, and paying for my hitch a breeze. I figured someone would get my order and fulfill it Monday as I ordered it on Sunday. Never thought you guys would get it going so fast and on a Sunday to boot. Thank you.
I've attached some pic's of the order status/tracking with timing to show how awesome my experience was.
I watched your installation video's and was able to complete the install in about 15 minutes. As I have a single exhaust Jeep, I took a picture of the clearance. Pictures also show a before and after. Looks factory. I will be using it mostly for a Thule bike rack and this Curt hitch is spot on.
And the price of the product PLUS free shipping (arrived when stated) was fantastic.
Thanks again to all of you. Please pass on our gratitude for a job WELL DONE!
This was the easiest trailer hitch install! Built strong and all around a great experience. I’m using it to pull a 17 ft travel trailer. Will definitely be ordering from etrailer for any of my future towing needs.
Jimmy
4/25/2021
After first year, and multiple trips towing our travel trailer to the eastern shore and to the mtns of NC, the hitch receiver has exceeded my expectations. This was the first curt receiver I’ve ever purchased, so in the beginning, I had my concerns being a new product to me. 1 year later, I will purchase Curt products from etrailer from now on. If my recommendation helps anyone with concerns, these receivers are extremely well built and strong. My opinion, best on the market for your hard earned money! And did I mention the install? So simple, had it installed, and torqued to correct spec in half an hour. Literally anyone can do it. Get your hands a little dirty and save some money $$$!
My fiancé installed the hitch at home. 4 bolts and the job was done. No lift necessary. I’ve already got my bike rack attached. Love it!
Sandra
5/4/2021
Great!
Seamless! Instructions say level 1 install in 30 minutes.
Super simple, fits perfectly and installed in my garage in 24 minutes.
Before and after
David
7/20/2022
Fantastic! Solid as a rock.
Very well made hitch. I was also pleased with the delivery process and customer service provided. I use it primarily for our mountain bike rack and it works great. I haven’t added the wiring harness package as yet as I have a Suburban with that ability that I use when pulling our hauling trailer.
Successfully installed on 2016 Jeep Grand Cherokee Limited. Installed by myself in about 20 min total, the included instructions are sufficient. An extra set of hands would be helpful, but the M14 bolts are long enough that I could hold up the hitch myself and get them started...a little awkward but doable. Installation summary: remove all four M14 bolts with 21mm socket, hold up the hitch to the holes to see if any caulk is in the way (I had to trim caulk near rear bolts on both sides to get hitch to line up properly), raise the hitch to align holes and insert/hand tighten the bolts, tighten with ratchet evenly all around to make sure everything lined up properly, tighten to proper torque.... and you’re done. There is a little more space between hitch and bumper than I anticipated (half inch or so), but now that I look more closely at all the other pictures on the website, mine looks same as all the others. Otherwise, price seemed good for the hitch, fast shipping, feels like solid quality, a couple of dings/scratches on the hitch out of the box, but overall it looked good and nothing I’m really worried about. Haven’t used the hitch yet. I don’t anticipate any issues, but will report back if anything else to add in future.
This hitch was a life saver. I ride and travel with my bicycles a lot - locally and nationally. Putting a bike and ride inside the MINI is doable but not ideal. This hitch is stealth, doesn't protrude bast my exhaust tips and works perfectly. Installation was a bit expensive but well worth it.
Very disappointed in your products with your company. The first hitch i ordered was damaged so bad out of the box so bad i had to return it and am STILL waiting for my refund! The second one came and seemed acceptable. I installed it and two days later its chipped and rusting in a visible area of the hitch. I was told on the phone "The hitch arrive to us from the factory stacked on top of on another so there going to be scratched and paint chipped". That response in not an excuse to me. That to me is a gap in QC (quality control). If majority of product are being damaged in transit from the factory. Demand that the producer get a better protected, quality product delivered to your company and in turn to the customer.
Outstanding!!!
First, Jeep wanted close to $700.00 to install their factory hitch. etrailer hitch cost me way less, no charge for shipping. It took me 5 minutes to unscrew the 4 bolts on the 2015 Jeep GC. I employed a friend to help me installed the hitch. It took us 5 minutes. It helps to have someone hold up one side of the hitch while attaching to frame. I highly recommend this product. It looks factory installed. Fits perfect under the bumper. Thank you
This was perfect for my 2020 Jeep Grand Cherokee Limited X! The install took me about 10 minutes (or less). The whole thing was painless and easy. Just take out 4 bolts, hold the trailer hitch in place and put the bolts back in. The hitch sits nice and tight to my bumper and is barely noticeable. Very happy with everything. As others have said the only thing you will need (for a jeep grand cherokee) is a 21mm socket wrench and an extra pair of hands to help hold it in place while you put the bolts back in.
Please listen; 2014 Jeep Grand Cherokee diesel owners, products fit you vehicle correct! when received it ; UPS had damaged the item and was a little bent was able to install it though , the limited models with spare tire under is a little tight although you can wrench with 13/16" shorties will also work. this is on the passenger side the wiring harness is very tight to hook up. In the end very satisfied with this product
Great hitch, I wish the video said to loosen up the the screws to the plastic around the spare tire. Broke one side I the plastic. Besides that, it's a great fast fit!!!
Ryan A.
8/20/2015
Luis, is your Jeep an Altitude?
Great product. Arrived more quickly than expected and installed in about 20 minutes (by myself).
This was my 4th Curt and will continue to buy them.
Steven K.
12/13/2018
This was a Christmas present for my son. It installed easily and is performing well.
The cost of the hitch was less than half of the dealer price. It shipped within an hour of placing the order. Installation took me 15 minutes working by myself. The painted finish is better than I had planned. I even got an installation video with my confirmation email. I can now tow my utility trailer without borrowing my brothers truck. I am completely satisfied with every aspect of the purchase and the product, I will order from you again. Thank you
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dale
7/11/2021
Great - no issues - looks good and tows well.