Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
(107 reviews)
Price: $688.85
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y96KB
Our Price: $688.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (107)
- Q & A (0)
- Videos (54)
- Photos
Yakima Roof Rack - Y96KB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima SightClip 7:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
Yakima SightLine Towers - Qty 4:
- 4 Low-profile towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and SightClips or RidgeClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima JetStream crossbars
- Safe and easy installation with included torque tool
- Clip holder adjusts on 3 axes for perfect fit on your flush rails
- SightClips or RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8006407 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
8001635 Yakima Sight Line Roof Rack Towers - Qty 4
Replaces Yakima RidgeLine Y00145
Video of Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Installation - 2022 GMC Sierra 1500
How's it going, everyone It's Ethan here with etrailer. Today we're going to be taking a look at the Yakima Roof Rack System with our JetStream crossbars and showing you how to install them on our 2022 GMC Sierra. If you're transporting a large amount of items or just large items in general and you don't have room in your bed, or they're just items you'd rather keep out of the cabin of your vehicle, a roof rack system like this is gonna be a good way to do that. The crossbars that we have here are an aerodynamic shape so they taper in the back just to cut down on some of that wind noise and wind resistance. With any sort of roof rack system, you'll get a little bit, but this is nice that it cuts some of that down. Additionally, it does feature this rubberized strip inside this T-track slot, so you can use these roof rack with T-track accessories and there's no need to trim the actual strip to get those on.
As far as the length of our crossbars go, there are a couple of different options as far as length. These are 60", which we found gives us enough room on top and enough overhang. The overhang that we have, we're measuring at 5", which gives you a little bit more room for accessories without being overbearing or sticking over your vehicle too much. With a weight capacity of 165 pounds, these crossbars will do a fine job of storing most of the bigger items that you might need, but something to keep in mind when you are storing those items is are they going to make contact with the top of your roof So we'll just measure from the roof to the bottom of our crossbars. It's about 3 1/2", so if your accessories do have clamps or things that hang onto the crossbars, you wanna keep that measurement in mind.
Additionally, to see how much height we're adding to the top of our vehicle is about 4 1/4", so if you live with these crossfires on your vehicle, that's how much you're gonna be adding to it. Additionally, if you have taller bindings on your skis or things like that, that's a good measurement to keep in mind to see if those will make contact with your vehicle as well. To start the install process, we like to just lay everything out, making sure that we know what everything is and that we have it. So we're going to obviously have our crossbar here, two towers, the covers for the towers, two hooks that'll keep the actual feet in place, two pads for the bottom, and our end caps. Additionally, there is a provided tool and we recommend going ahead and grabbing a fabric tape measure.
They do provide one, but we have our own. We'll start by assembling our towers. First thing, we probably want to loosen this metal plate here. We do that first actually by releasing this security lever. As you can see, it covers it.
If you pull it back, you have access to get in there. So we'll loosen that. And in our case, there are three different steps for the GMC Sierra that we're going to be putting these on. They do recommend setting it to C, but make sure you check the manual and see what's recommended for your vehicle. Now the next step is to get the actual feet on the towers. So ours came with a plastic cover. We just removed that, and making sure that this arrow on the tower is facing out, it just snaps into place. (feet snapping onto tower) And now we can go ahead and slide this onto our crossbar. Because we loosened that metal plate earlier, it should just slide right onto our track like so. Make sure you consult the manual to see the specific measurements for your vehicle, but as you can see, there are little ruler notches on the actual crossbars themselves, so using those will slide the feet to the point where we need it, which is right about here, in our case, and we can get that tightened down. (screwdriver twisting) Once we have our feet on, we can put our end caps back on just like that. As you can see, we already have our first crossbar installed. We got our measurement from the end of our glass windshield here and took it up to the front of the tower. It's going to be vehicle specific, but we have it where we need it in our case. Now we can fit our crossbar onto the roof of our vehicle, trying to do it as carefully as possible. The pads on the bottom should make it a little bit nicer on top of your vehicle, but we'll get it vaguely where we need to be and adjust it. When you actually place the crossbars on top of the vehicle, these feet are nice 'cause they will actually fit in the ridges on top of your roof. Now that we have our crossbars roughly where we need them to be, we'll take a measurement to make sure that the crossbar spread is what's recommended for our vehicle. In our case, it is 32", so we're about there. Just slide this forward a little bit and that's pretty good. Now we'll get clamps installed as well, starting by opening up that security door again, sliding it through, and all we have to do is get our tool through the middle of there and tighten it, probably not all the way just yet. We're gonna have to adjust our other side and we'll probably wanna go back and forth tightening it down just to make sure that one side isn't over-torqued. We've tightened the other side to where we need it to be and this one's about where we need it as well, so we'll close that security gate up and we can fit our racks back, or the end cap back on starting with these cringes down at the bottom and click that in place. Once you've done that, that's basically it. Fairly simple installation, as long as you know where all the pieces are and what they do, but you're ready to hit the road. Overall though, I think that the Yakima Roof Rack System is a sleek and pretty effective roof rack system. I like that the arrow bars will cut down on that wind resistance and I really like that rubberized strip that I don't have to trim. Now, if aesthetics are something that's really important to you, we found that the Rhino-Rack Roof Rack System looks just a little bit sharper, but I like the install of the Yakima Roof Rack System a little bit better, just a little bit easier if you're gonna be taking it on and off a lot, in my opinion, and overall, I think that it's a really nice fit on our 2022 GMC Sierra.
Customer Reviews
Yakima SightLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 - Y96KB
Average Customer Rating: 4.8 out of 5 stars (107 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Jonathan05/24/2024
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: Adam K05/14/2023
Pretty straight forward installation. Instructions were easy to follow.
by: Rod12/05/2021
2010 Jeep Grand Cherokee
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
by: Andrew08/01/2023
Great! Easy to install!
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
by: Daryl04/29/2020
Jeep Cherokee
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
by: Diane 07/28/2023
SIMPLE & EASY1
by: Greg N.11/18/2021
Ford Expedition
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
by: Tom03/30/2021
Received order promptly thanks to help from Korren! Love Yakima products, well made, components all fit well. Instruction were easy to follow and the products have been well thought out in terms of markings, measuring distances to my specific car model and ease of assembly.
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.
by: Ryan09/07/2022
Quiet crossbars that look good and do not howl at highway speeds.
by: Mark06/30/2023
Works as expected and feels solid
25
388
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Compatibility of the Yakima # Y00426 and # Y33TR with Sunroof on a 2021 Ford Bronco SportWhile we do not know the exact height of the raised rails of your 2021 Ford Bronco Sport Badlands, there is a way to gain a strong approximation of whether the Yakima JetStream Crossbars - Black - 60" Long # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR allow you to open the sunroof on your vehicle. From the bottom of your roof to the bottom of the JetStream crossbars is about 4 inches tall. In order to determine if you have enough room, I recommend opening your...
view full answer... - Roof Rack Recommendation for a 2021 Toyota Highlander with a Naked RoofFor a great-quality roof rack for your 2021 Toyota Highlander with a bare roof, I recommend the following setup: - Yakima JetStream Crossbars - 60" Long - Qty 2 # Y00426 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06153 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06132 - Yakima Same-Key Lock Cores # Y07204 With this roof rack setup, you will receive 165 pounds of maximum...
view full answer... - Recommended Roof Rack and Kayak Carrier for 2021 Toyota TundraBecause they're a lot more quiet than square or round profile crossbars, I'd recommend a roof rack with aero-style crossbars. I really like the quality and the ease of use provided by the Yakima JetStream roof rack, which can be assembled from the following parts: • JetStream 60 Inch Aero-Style crossbars part # Y00426 • BaseLine roof rack towers, part # Y28TR • Vehicle specific fit kit # Y06121 • Vehicle specific fit kit # Y06129 A lock kit is available separately as part # Y07204 To...
view full answer... - Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
view full answer... - Load Assist Kayak Carrier for 2012 Hyundai Sante Fe With Factory Roof RackI have a couple solutions for you but the Thule Hullavator # TH898 will not work with your factory roof rack on your 2012 Hyundai Sante Fe. The carrier requires 4"-8" of crossbar overhang from the support tower. This is to provide enough clearance for the lift assist to clear the side of your 2012 Hyundai Sante Fe. You can swap out your factory roof rack for a roof rack system that has an overhang that will work with the carrier. The Yakima Jetstream Roof Rack could get you the overhang...
view full answer... - Correct Yakima Crossbar Length for 2016 Ford Edge With Panoramic Glass RoofI checked with Yakima, and the correct length of crossbars for your 2016 Ford Edge is 60 inches; the 50 inch length will be too small. For your '16 Edge with a panoramic glass roof, the Yakima roof rack system that fits is made up of the following parts: - Yakima JetStream Crossbars # Y00426 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06102 - BaseClip Fit Kit # Y06139 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews...
view full answer... - Best Roof Rack For Hauling Two Angler Kayaks On A 2018 Jeep Grand CherokeeSometimes the manufacturers rate their roof racks for less than what your vehicle can handle. For some racks like the Yakima JetStream Roof Rack System using the Jetstream Crossbars # Y00426, the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06121 you will have a weight capacity of 165lbs which should be right at what your roof can handle. So, get the Yakima JetStream Roof Rack System and for your 68lb Kayaks, I suggest getting the etrailer J-Style Kayak Carrier - Folding - Universal...
view full answer... - Roof Rack for 2005 Toyota 4Runner to Carry Yakima SkyRise HD TentThe Yakima SkyRise HD part # Y07437 needs to attach to an aftermarket roof rack with top channels in like the Yakima JetStream roof rack part # Y00426 and # Y00147 that is a confirmed fit for the roof of your 2005 Toyota 4Runner with raised rails.
view full answer... - Does Yakima Roof Rack Fit 2021 Kia Telluride With a Naked RoofI checked with the manufacturer for you and can confirm that the Yakima roof rack is absolutely a fit for your 2021 Kia Telluride with a bare roof. It will work and fit perfectly on your Telluride to allow you to carry whatever cargo you need. The rack is made up of the following parts: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06165 - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Item...
view full answer... - Wireless Observation Camera That Does Not Require Installing Monitor on VehicleWe do have a wireless camera system that use your smartphone or iPad as the display so there is no need to mount a monitor in the passenger compartment. The Rampage Wireless Backup Camera # RA7710 features a rechargeable battery-powered camera with a magnetic mount for quick and easy non-permanent installation when you need it. This means no wiring and that you can put the camera just about anywhere you need it. The Rampage has a 300-foot transmission distance too so it will work fine...
view full answer... - Will the Thule Portage Canoe Carrier Work on Yakima Jet Stream CrossbarsYes, the Thule Portage Canoe Carrier part # TH819 will work with Yakima JetStream Crossbars like part # Y00426. There are very few crossbars that the Thule Portage Canoe Carrier won't work on, usually only factory crossbar have issues but only some.
view full answer... - Recommended Roof Rack to Use Thule Hullavator # TH898 on a 2017 Jeep Grand CherokeeI'm so sorry to hear about your situation! From the looks of your previous crossbar order, you ordered the Thule AeroBlade Edge Roof Rack TH7602-TH7602. While we definitely have roof rack options for you to work with a Thule Hullavator # TH898, the AeroBlade Edge crossbars do not provide you the required 4-8 inches of crossbar overhang past the feet required for the Hullavator to function. This is because the AeroBlades do not extend past your rails. Judging that you purchased AeroBlades,...
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Compatibility of Thule Upride Bike Rack with Yakima JetStream Roof Rack CrossbarsThe dimensions of the T-slot are consistent between Thule, Yakima, Rhino Rack, Inno, Malone and most of the other major players. Your Thule accessories that are designed to mount in the slot or channel in the top of the crossbar will indeed be compatible with the Yakima 60 inch # Y00426 crossbars. Yakima confirms that the 60 inch crossbar along with the # Y33TR TimberLine towers will indeed work on your 2012 Toyota 4Runner Trail. I've linked you to our Roof Rack help articles.
view full answer... - Will Two Bikes and a Kayak Fit on a 2019 Subaru Forester Factory Roof RackIf you were to upgrade to an aftermarket roof rack then I believe you would be able to fit two bikes and a kayak on top of your 2019 Subaru Forester but not with the factory roof rack. In order to upgrade, I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00248 which actually replaces the factory roof rack. The Yakima JayLow Kayak Carrier part # Y04073 along with two of the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 would then allow...
view full answer... - Recommended Roof Rack to Fit 2 Sets of the Thule Hullavator on a 2013 GMC TerrainSince the Thule Hullavator Pro Kayak Carrier # TH898 requires about 31" of crossbar space, the 53" WingBar Evo bars # TH711400 that you referenced are not long enough to accommodate it. The Thule aero bars also have limited mounting space on the underside so you wouldn't be able to go with larger crossbars but we do have an alternative solution for longer crossbars. Yakima has their JetStream bars which are comparable to the WingBar Evo bars and they have a strip that runs the full length...
view full answer... - Recommended Roof Rack And Ski Carrier For 2017 Acura RDX With Naked RoofThe roof rack I recommend for your 2017 RDX is the Yakima Jetstream roof rack. This roof rack uses Black aerodynamic aluminum crossbars that are designed to dramatically reduce wind noise and vibration, and also reduce drag so it helps with fuel efficiency. This roof rack has a 165-lb weight capacity so 4 sets of skis will be no problem. Installing this roof rack will not affect the warranty of your Acura. For this roof rack you will need to order: part # Y00426 part # Y28TR part # Y06148 part...
view full answer...
- Options for Carrying 4 Step-Thru E-Bikes with FendersGiven the weight and style of your e-bikes, there is not a 4-bike rack that can accommodate all 4 bikes at the same time. I have included a couple other ways to potentially carry your 4 bikes. I would start by putting the (2) Lectric 2.0 bikes on a 2-bike rack because they are the heavier bikes between the Lectric 2.0 (64lbs., 57lbs. with the batteries removed) and Aventon Pace 350 (49lbs., I could not find battery weight information to know how much they weigh with the battery removed). I...
view full answer... - Does Yakima Jetsream Roof Rack Fit 2020 Chevy Silverado 1500 Crew Cab New BodyYes the Yakima Jetstream roof rack part numbers # Y00426, # Y28TR, and # Y06110 is a confirmed fit for your 2020 Chevy Silverado 1500 crew cab new body style!
view full answer... - Roof Rack for 2011 Ford F-150 to Carry Two Thule Hullavator Kayak CarriersSince the max crossbar width the Thule Hullavator part # TH898 can take up is 28-1/2 inches for a roof rack that fits your 2011 Ford F-150 that would work great is the 60 inch bar width Yakima Jetstream roof rack part numbers # Y00426, # Y00146, and # Y06168 which the Hullavator can fit into the top channels of and would easily accommodate both racks. This will install on the roof of the truck though. If you'd prefer a solution for the cap let me know.
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer...
- Roof Rack for 2020 Toyota Highlander to Carry Thule Motion XT XL Cargo BoxYes, the Thule Motion XT Roof Cargo Box part # TH629806 that you referenced does fit the Yakima Jetstream roof rack that is a confirmed fit for your 2020 Toyota Highlander with flush mounted roof rails: JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y00146 Landing Pad 28 # Y06153 Landing Pad # Y06132
view full answer... - Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Long Crossbar Roof Rack Recommendation for 2020 Honda Pilot with Naked RoofFor your 2020 Honda Pilot with a naked roof the roof rack we have with the longest crossbars is the Yakima Jetstream rack part # Y00426, # Y28TR, and # Y06152. This gives aerodynamically shaped bars that are 60 inches length which will work really great on your 2020 Honda Pilot. I attached a picture of what this looks like installed as well as an install video as well.
view full answer...
- Roof Rack and Kayak Carrier Recommendation For 2015 Mini Cooper 2 DoorI am happy to recommend a roof rack and kayak holder for the 2015 Mini Cooper 2 door. I recommend Yakima roof rack part # Y00425 for the bars, part # Y64AR for the feet and ft kit part # Y06009. This is a aerodynamic bar system that will cut down on wind noise and allow you to carry your kayaks. For the Kayaks I recommend, Yakima JayLow Kayak Carrier part # Y04073 because you can carry up to 2 kayaks with one carrier compared to most J-style carriers that only allow you to carry 1 kayak....
view full answer... - Parts Needed for Yakima JetStream Roof Rack on 2024 Mazda CX-5 With Flush RailsWe have exactly what you need to install the Yakima JetStream roof rack on your 2024 CX-5. You will need the following: -Yakima JetStream Crossbars # Y00425 -SightLine Towers for Yakima Crossbars # Y64AR -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y39AR You also have the option of adding the Yakima SKS Lock Cores # Y07204 for added security. I have attached an installation video below for your reference.
view full answer... - Recommended Roof Rack for a 2024 Kia Telluride w/ Flush Roof Rails Congrats on the new SUV! To add a roof rack to your 2024 Kia Telluride with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y34UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System...
view full answer... - Recommended Yakima Roof Rack for a 2024 Hyundai Palisade w/ Flush Roof Rails Yes, it will and congrats on the new SUV. The parts listed below will add a Yakima roof rack to your 2024 Hyundai Palisade: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y79AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak CarrierIn order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush RailsTo add a Yakima roof rack to your 2024 Honda CR-V with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
view full answer... - Recommended Roof Rack for 2024 Kia Telluride With Flush RailsFor an extremely quiet rack that will look good on your 2024 Telluride I recommend the Yakima JetStream roof rack. You will need the following parts: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y34UR The JetStream bars have an asymmetrical shape making them very aerodynamic. Combine this with the WindRidges...
view full answer... - Quiet Roof Rack for 2023 Kia Sorento With Flush RailsFor an extremely quiet roof rack that fits the flush mounted rails on your 2023 Kia Sorento I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 -SightLine Towers for Yakima Crossbars # Y64AR -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y77UR The JetStream bars use an asymmetrical shape making them very aerodynamic. This combined with the WindRidges built into the bars results in a dramatic reduction...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush Rails Yes, we do have the parts you will need and congrats on the new vehicle. To add a roof rack to the flush rails on your 2024 Honda CR-V you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity....
view full answer... - What Do I Need to Mount a Cargo Box on a 2020 Hyundai Palisade?In order to have a cargo box on your 2020 Hyundai Palisade, you will need a roof rack system with crossbars in order for you to mount the box and cargo. Compatible systems depend on whether your vehicle has a bare roof or flush factory side rails. If your vehicle has a bare roof, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia TellurideGoing with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
view full answer... - Fitment of 2 Rhino-Rack Kayak Carriers # S512-S512X to Transport 4 Kayaks on a 2022 Hyundai PalisadeYes! You can use 2 sets of the Rhino-Rack Kayak Carrier # S512-S512X to transport 4 kayaks on your crossbars. Since one of these sets takes up roughly 20" of crossbar space, you need to have al least 40" of usable crossbar length on your roof rack to accommodate 2 of the # S512-S512X. You do not need to worry about additional straps because the carriers come with all the straps you need. If you need a compatible crossbar system with the length you need, the parts you need depend on if...
view full answer... - Yakima SightClip Fit Kit For 2023 Mazda CX-5 With Flush Side RailsFor your 2023 Mazda CX-5 with flush side rails, the correct Yakima SightClip Fit Kit is the SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y39AR. You will also need the SightLine Towers for Yakima Crossbars - Flush Side Rails # Y64AR and Yakima JetStream Crossbars # Y00425.
view full answer... - Recommended Roof Rack for a 2022 Ford Escape With Factory RailsThe roof rack that I recommend for your 2022 Ford Escape with Factory rails is the 2022 Ford Escape Roof Rack by Yakima which consists of: - Yakima JetStream Crossbars # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit for Yakima SightLine Roof Rack Towers # Y36AR This would provide you with a roof rack that fits your 2022 Ford Escape and would allow you to use both clamp-on and channel mounted accessories. It has a weight capacity of 165 lbs. and an aerodynamic...
view full answer... - Can Thule AeroBlade Edge Cross Bars Be Used On a 2023 Kia Niro Or What Option Is ThereI contacted the manufacturer and there is not an option that will allow you to use the Thule AeroBlade Edge Crossbars on your 2023 Kia Niro. The Fit Kit for Thule Evo Flush Roof Rack Feet # TH57JV you asked about, which works with the Evo Flush Rail Feet for Thule Crossbars # TH710601 does work with the AeroBlade crossbars but they do not work with your 2023 Kia Niro. We do not currently have an option from Thule for your 2023 Kia Niro, but we do have an option from Yakima. 2023 Kia...
view full answer... - Will Roof Rack Work with a 2020 BMW X3 with a SunroofIf Thule warns against using the Thule AeroBlade Edge Roof Rack on your 2020 BMW X3 with a sunroof, then I will second them. Instead, I recommend going with a system that has been shown to work with your sunroof. It's the Yakima Roof Rack. The crossbars are the JetStream Crossbars, part # Y00425. The towers are the SightLine Towers, part # Y64AR. The fit clip is part # Y62CR.
view full answer... - Can I Put 70" Yakima JetStream Bars On A 2024 Kia Niro PHEVYou absolutely can put your Yakima JetsStream bars on your 2024 Kia Niro PHEV with factory flush rails. To do so you will need the following parts: SightLine Towers for Yakima Crossbars # Y64AR SightClip Fit Kit for Yakima SightLin3 Towers # Y27AR Since the mounting channel on the Yakima crossbar runs the full length of the bar, you can mount virtually any size crossbar on your roof. That said, we recommend a 50" bar # Y00428 for the Kia Niro. So while your 70" bars will still fit, there...
view full answer... - Can Lock Cores Be Installed on SightLine Towers for Yakima CrossbarsYes, the SightLine Towers for Yakima Crossbars # Y64AR can be locked with the Lock Core Kit # Y07204. Yakima changed the design slightly and there are 3 pieces to this tower system (as opposed to the normal 2), with the middle piece being the part that the lock core installs on. This gives you a much cleaner aesthetic while still providing security to your roof rack.
view full answer...
- Yakima Roundbar Roof Rack System Options For A 2024 Kia Seltos LXYakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet. If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima Crossbars...
view full answer... - Recommended Roof Rack for a 2022 Kia Soul that has Flush Mounted Rails that Run Front to BackThe roof rack that I recommend for your 2022 Kia Soul with flush mounted rails that run front to back is the 2022 Kia Soul Roof Rack by Yakima. This roof rack consists of: - Yakima JetStream Crossbars # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit for Yakima SightLine Roof Rack Towers # Y94UR You can also add the Yakima Same Key System (SKS) Lock Cores # Y07204 to secure your roof rack to the roof of your Soul.
view full answer... - Can I Open Trunk of 2020 Volvo XC90 With Thule Force XT Rooftop Box?While we haven't test fit the Thule Force XT XL Rooftop Box # TH6358B on a 2020 Volvo XC90, I believe it will fit based off the measurements of your vehicle. You can measure yourself to make sure too if you like. Let's use the Yakima Roof Rack System fitted for your vehicle with parts # Y00425, # Y64AR, # Y67AR. When the bars are mounted to the fixed points on your roof, there is a distance of 58" from your front bar to your hatch. The hatch clearance required is only 51-1/8" so based...
view full answer... - Will 2 of The Yakima JayLow Kayak Carriers Fit On Roof of a 2022 Hyundai Palisade?Yes, you are going to be able to use 2 of the Yakima JayLow Kayak Roof Racks # Y04073 with either the Thule Edge or Yakima Sightline FX kits listed below. Personally with the height of your 2022 Hyundai Palisade I would go with the more standard Thule EVO or Yakima Sightline kits which have the crossbar extending out further. This will also allow for the use of a Load Assist # RR-RUSL so you are less likely to drop your heavy kayak both when loading and unloading. Thule Edge Crossbars...
view full answer... - How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side RailsSo long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.