bing tracking image
  1. Roof Rack
  2. Yakima
  3. Fit Kits
  4. 4 Pack
Landing Pad 15 for Yakima SkyLine and Control Towers - Qty 4

Landing Pad 15 for Yakima SkyLine and Control Towers - Qty 4

Our Price: $143.95
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 2 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Replace your vehicle's factory crossbars with these Landing Pads that are designed to install directly to the crossbar mounting points on your side rails. The pads create mounting points for Yakima SkyLine and Control Towers. Great Prices for the best roof rack from Yakima. Landing Pad 15 for Yakima SkyLine and Control Towers - Qty 4 part number Y00241 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (715)
  • Q & A (0)
  • Photos

Yakima Roof Rack

  • Fit Kits
  • Yakima
  • 4 Pack

Replace your vehicle's factory crossbars with these Landing Pads that are designed to install directly to the crossbar mounting points on your side rails. The pads create mounting points for Yakima SkyLine and Control Towers.


Features:

  • Mounts in place of your vehicle's factory crossbars to provide attachment points for a Yakima roof rack
    • Pair with Yakima SkyLine and Control Towers and crossbars (sold separately) to create a complete roof rack
  • Bolts to the factory crossbar mounting points on your side rails with included hardware
    • Corner-specific pads are labeled for easy installation
  • Includes snap-on covers to protect the pads when towers are not in place


Specs:

  • Quantity: 4 pads
  • Dimensions (each): 6-3/4" long x 2" wide x 2" tall
  • Limited lifetime warranty


Yakima Landing Pad 15

These pads let you replace your vehicle's factory roof rack. Simply remove your factory crossbars and mount these pads in their place. The pads create attachment points for Yakima SkyLine and Control Towers (sold separately). These towers pair with Yakima crossbars (sold separately) to create a complete aftermarket roof rack system.



8000241 Landing Pad 15 for Yakima Control Towers - Qty 4

Item # Y00241





Customer Satisfaction Score:


Customer Reviews

Landing Pad 15 for Yakima SkyLine and Control Towers - Qty 4 - Y00241

Average Customer Rating:  4.8 out of 5 stars   (715 Customer Reviews)

Replace your vehicle's factory crossbars with these Landing Pads that are designed to install directly to the crossbar mounting points on your side rails. The pads create mounting points for Yakima SkyLine and Control Towers.

by:

Fit my 2016 Subaru Outback perfectly!



by:
2019 Subaru Outback Wagon

The Landing Pad 15 was exactly what I needed for 2019 Subaru Outback Yakima Sky Line Towers. I am 5'3" older lady and was able to install the entire system with Jet Stream crossbars without assistance, thanks to videos. (Yakimas instructions are photo only). But I really want to commend your company on the website, shipping, video tutorials, personalized communication, and follow up. Great job etrailer!



by:

Yes, The Yakima roof rack has been working flawlessly. I did have one issue where one of the landing pad covers flew off that I had to replace. I understand parts wear and plastic gets brittle and/or shrinks with time in the sun, but that shouldn't have happened so soon. Other than that, we bought a Thule Motion XT box to use for long travels.



by:

The Yakima Landing Pads are an essential component of the rack system in use on my vehicle. They are paired perfectly with the rest of the system and were easily installed and removed at the end of seasonal use-- though they could easily remain a permanent installation. The items are excellently constructed and have weathered their heavy use with no evidence of wear.



by:
2016 Subaru Outback Wagon

The rack system is nice, however, there are four plastic covers when the racks are not in use and one of them (front driver's side) will just not stay in place. Unfortunately, that means that the rain and weather will probably damage the uncovered parts.



by:
Subaru

These installed easily and look nice. I didn't get the feeling that the mounting was quite rock-solid, although in fairness there's only so much that can be done given that they're at the mercy of the built-in Subaru mount points.

With that said, I've carried things like plywood multiple times without incident (where the concern is the sheet acting like a sail and lifting up rather than pushing down), so they've done their job so far.



by:
2018 Subaru Outback Wagon

Appreciate that this company had a # 15 Yakima landing pad set available for a very reasonable price. Order came through quickly and I'm back in business with a 2018 Subaru Outback using my older Yakima "towers" , bars and kayak saddles.
Thanks guys!



by:
2016 Subaru Outback Wagon

Great product. Good price. Delivered in timely manner.



by:



by:



by:



by:

with so many variables having someone that could sort through all them was very helpful Thanks etrailer



by:

It was what it was advertised and fit perfectly on my 2023 Ford Maverick



by:

Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.



by:

First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.



by:

I have these installed on a 2022 Honda Pilot. I could not get them to fit on my raised roof rails with the included rubber gaskets. I have mounted them without the gasket but this leaves a gap between the rail and the landing pad. This seems secure but does not have a finished look. I will be trying to see how to get the gaskets to fit.



by:

In the confusing world of roof racks, the etrailor site had a locator tool that made it easy to identify the correct landing pads and towers for my vehicle.



by:

I had cross bars and landing pads on my Jeep Grand Cherokee. I bought these to put on my wife’s new Grand Cherokee L. They were extremely easy to install and now I can easily move the roof rails between the two vehicles. They are a great product as is most of Yakima’s products. I highly recommend them.



by:

Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.



by:

My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.



by:

Very easy to replace. Fit perfectly. I had a slight disaster with roof rack and Yakima showdown but fortunately replacing the landing pads was all that was needed. Very happy about the ease of finding, installing and using.



by:

Fit good with the OE track on roof. I like the new covers they supplied with the mounts.



by:

Wanted to salvage my round bars and all other Yakima products I had previously on my Tacoma. These worked great. Easy to install. The directions are very clear. I only recommend taking your time with the install to make sure you've got it all aligned and waterproofed correctly.



by:

Amazing quality easy set up fast shipping buy the locks the 4 pack With this fast shipping super impressed



by:

All I can say is wow!! Outstanding customer service from shipping overnight, to follow up the next day to make sure the package arrived safely and was the appropriate part!! Customer service all stars!!! Thank you so very much!!


25
286
Show More Reviews

See what our Experts say about this Yakima Roof Rack

  • How to Determine if Two Malone SeaWing Kayak Carriers Fit 2019 Subaru Outback Factory Roof Rack
    Your kayaks will fit the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD, but two of them will not fit your 2019 Subaru Outback's factory roof rack because the crossbars simply are not long enough for both the carriers and your 30" wide kayaks. So to use a kayak carrier you'll need an aftermarket roof rack, and the verified fit to replace the roof rack on your 2019 Outback is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428...
    view full answer...
  • Removing Rusted Bolts On The Yakima Landing Pad 15 Y00241
    That is going to be a tricky one of the bolts on your Yakima Landing Pad 15 # Y00241 is rusted in place. We generally will use BP blaster on rusted bolts and it has proven to be pretty effective. If that does not do the trick you could try using a left handed drill bit of screw extractor tool like the # PT92CV. This kit includes 5 reverse drill bits and 5 screw extractors which will allow you to remove most screw sizes.
    view full answer...
  • Landing Pad Recommendation to Fit 2015 Subaru Outback Wagon
    The Landing Pads are different for the two year Outbacks. The 2011 model uses the Landing Pad 12 and the 2015 uses Landing Pad 15 # Y00241. So basically all you'd need is # Y00241 and you'd be able to install your old rack onto your new vehicle.
    view full answer...
  • Largest Roof Rack Recommendation for a 2016 Subaru Outback
    If you install the Yakima SkyLine Towers, # Y53TR, along with the Round Bar Adapter, # Y03536, and the Landing Pad, # Y00241, then you can install any length of the Yakima round crossbars that you wish. Yakima has a 78 inch crossbars, # Y00411, 66 inch crossbars, # Y00410, 58 inch crossbars, # Y00409, and 48 inch crossbars, # Y00408. It is okay to cut them down to a custom length as well if you feel like one is too long once it is installed. There are a few things to keep in mind. First,...
    view full answer...
  • Comparing Yakima Skybox With Thule Sonic Rooftop Cargo Box On 2016 Subaru Outback
    I'll give you a comparison of the Yakima SkyBox 18 Rooftop Cargo Box - 18 cu ft - Black Carbonite, # Y07336, and the Thule Sonic XL Rooftop Cargo Box - 17 cu ft. These roof mounted cargo boxes are more similar than different. The obvious size difference only adds inches to the overall length and height. Both carriers have the aerodynamic design with strong ABS plactic, integrated locks, and internal anchor points. They fit the same variety of crossbars with only 3/8 of an inch difference...
    view full answer...
  • Best Replacement Roof Rack for a 2019 Subaru Outback To Use With Thule Hullavator
    It you do not wish to attach a set of crossbars to the raised side rails which just so happen to also be the crossbars in the stowed position on your 2019 Subaru Outback Wagon then you can use the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00241 which actually replaces the factory crossbars. This option will be inline with the owner's manual and it does not limit your crossbar spread like the option that you mentioned would. The above would then allow you...
    view full answer...
  • Can Thule Hullavator Be Used on 2019 Subaru Outback Wagon with Factory Roof Rack
    I do have a way for you to be able to use the Thule Hullavator Kayak Carrier # TH898 on your 2019 Subaru Outback, however as you mentioned in your question you won't be able to attach the carrier using the factory roof rack on the vehicle. This is simply because The Hullavator requires that the roof rack crossbars extend past the feet at least 4 inches so that there is the necessary clearance between the carrier and the vehicle. Since the factory crossbars are flush with the feet/side rails,...
    view full answer...
  • What Yakima Parts from Roof Rack From 2001 Subaru Outback would Fit a 2016 Outback
    You will be able to reuse the 48 inch round Yakima crossbars part # Y00408, but you will need to go with new feet part # Y53TR, new fit kit part # Y00241 and the SL adapter part # Y03536.
    view full answer...
  • Parts Needed to Install Yakima Roof Rack on 2017 Subaru Outback Wagon
    Yes, the Landing Pad 15 # Y00241 is the correct Landing Pad for a 2017 Subaru Outback Wagon with flush mounted roof rails. For a round bar roof rack you would need these part numbers # Y00408, # Y53TR, # Y03536, and # Y00241. For an aero bar roof rack you would need the # Y00421, # Y53TR, and # Y00241. Aero bars provide better fuel mileage and less wind noise.
    view full answer...
  • How To Mount The Yakima HD Cross Bars On A 2018 Subaru Outback Wagon
    To add the Yakima HD cross bars to the existing roof rails on your 2018 Subaru Outback wagon. I don't suggest making holes in the roof rails. We cannot provide the information to install them in that manner. I recommend using the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 Item # Y03541 the Landing Pad 15 for Yakima Control Towers - Qty 4 Item # Y00241 and the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track...
    view full answer...
  • How to Transport 3 Bikes 1 E-Bike with a 2018 Subaru Outback Wagon
    I do have a recommendation for you, but with your specific bike rack needs you don't be able to use your 1-1/4" trailer hitch on your 2018 Subaru Outback Wagon to carry all 3 bikes. Either the bike rack is way too heavy and requires a 2" receiver, like the Draw-Tite # 76227, or it doesn't have the attachment option you need, plus the weight capacity for your heavier bike. For your application you'll need to use a hitch bike rack and a roof mounted bike rack. The hitch mount bike rack I...
    view full answer...
  • Recommended Roof Rack And Canoe Carrier For 2015 Subaru Outback Wagon
    If you have a roof rack system on your Outback and is not the Sport model, the roof rack I recommend is the Yakima CoreBar roof rack. You would need to remove your roof rack and use the fixed mounting points on your roof. The 50-inch aero-style crossbars design helps reduce wind noise and drag and helps keep the roof rack quieter. For this roof rack you will need part # Y00421, part # Y53TR, and part # Y00241. For longer crossbars, you can take a look at part # Y00422 for 60-inch, and...
    view full answer...
  • Longest Crossbar Roof Rack for 2018 Subaru Outback Wagon with Raised Rails
    For your 2018 Subaru Outback Wagon the longest crossbar roof rack we is the Malone part # MPG216 which has 58 inch bars and is confirmed as a fit. For a Yakima solution that is longer you could use the # Y00148, # Y00241, and # Y00426 for a 60 inch bar or part # Y00427.
    view full answer...
  • Yakima RoundBar Roof Rack to Fit 2017 Subaru Outback with Stowable Crossbars
    The parts you listed are correct to make up the Yakima RoundBar rack for the 2017 Subaru Outback models that use Subaru's stowable rack system like you have. Here's links to each part: 48 inch RoundBars # Y00408 SkyLine Towers # Y53TR RoundBar Adapter # Y03536 Landing Pad 15 # Y00241 Since it sounds like you may already have crossbars it's possible you don't need new ones. The 48 inch bars are the recommended length but if yours are longer you can use them on your new Outback. They'll...
    view full answer...
  • Replacement Covers for Yakima Landing Pads
    Which Landing Pads do you have? I ask, because the replacement cover you need will depend on which Landing Pad you have. Here's a listing of which covers we currently offer with the Landing Pad they work with: • LandingPads 1 - 4, 8 - 10, LP11, and LP16 - LP22, and LP24, part # Y8890029 • LandingPads 5, 6 or 7, part # 8890030 • LandingPads 12, 13 and 15, part # 8880210
    view full answer...
  • Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
    The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
    view full answer...
    Image 1 for
  • Yakima Landing Pads for 2017 Subaru Outback Wagon
    The Yakima Landing Pad 15, part # Y00241 is a confirmed fit for the 2017 Subaru Outback. According to Yakima, these will work with SkyLine towers and Control Towers. If it turns out your current towers don't fit the new landing pads, you'll need the following parts to use your existing round bars: - SkyLine Towers for Yakima Crossbars, part # Y53TR - Round Bar SL Adapter, part # Y03536 This will allow you to keep your current bars and install them on the landing pads if needed.
    view full answer...
  • Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
    The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
    view full answer...
  • Recommended Roof Rack for 2018 Subaru Outback Limited
    The roof rack that I highly recommend for your 2018 Subaru Outback Limited, which has the flush mounted rails that run front-to-back is from Yakima because it gives your Subaru a roof rack that is not only highly effective but also very quiet. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 15 for Yakima Control Towers # Y00241 This roof rack will look graceful atop your '18 Outback Limited due to...
    view full answer...
  • Best Roof Rack For The Thule Hullavator On A 20118 Subaru Outback Wagon
    It all depends on what your 2018 Subaru Outback Wagon has on the roof. If you have a touring Outback with flush rails you will need the Thule WingBar Evo Crossbars - Aluminum - Black - 50" Long - # TH711320; The Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - # TH710601; and the Fit Kit for Thule Evo Flush Roof Rack Feet - # TH186047. These bars will have the T-Slot on top so you will be able to use the Thule Hullavator # TH898. If you do not have the touring Outback and...
    view full answer...
  • Carrier 2 Canoes on a 2015 Subaru Outback Using Aftermarket Roof Rack Crossbars
    If your 2015 Subaru Outback also have the factory raised side rails (which it should) then yes, you can add alternate crossbars using SkyLine towers # Y53TR, Landing Pad # Y00241, round bar adapters # Y03536, and crossbars # Y00409. These are 58 inch long crossbars which will provide enough space for 2 canoes side by side. Please note the roof weight carrying capacity of the vehicle is 150 pounds. Keep that in mind prior to loading. For a canoe carrier I recommend using 2 of # TH819 which...
    view full answer...
  • Can Yakima Round Crossbars Install on Roof of 2015 Subaru Outback Wagon with Factory Rack
    Yakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set.
    view full answer...
  • Yakima Roof Rack Parts Needed for a 2017 Subaru Outback Wagon
    Yes, the recommended Yakima Landing pad for the 2017 Subaru Outback is the Landing Pad 15 part # Y00241 that you referenced. For crossbars you would want the part # Y00408, for towers part # Y53TR and adapters part # Y03536. All of these components would complete a roof rack for your vehicle.
    view full answer...
  • Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
    The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
    view full answer...


< Previous



Do you have a question about this Roof Rack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Installed by:
Andrew K
Employee Tyler C
Edited by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Matthew S
Written by:
Matthew S
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.