Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Thule WingBar Evo Crossbars 47" - Silver - Aluminum - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're taking a look at our Thule WingBar Evo Roof Rack System, with the custom Fit Kit, for your 2019 Kia Sorento. The Sorento is a great vehicle for different types of situations. You have a lot of space inside for your friends and family, but you also have the ability to go on those different adventures. Now, what if you want a roof rack to carry around those different types of accessories though Let's say you wanna carry around kayaks, or a roof box, or a roof basket, or even a roof-mounted bike rack. In that case, an aftermarket roof rack, like the one we have right here, might be the solution for you. So, this is the WingBar Evo roof rack system, with the 47 inch long Thule WingBar Evo crossbars.
We also have the Evo Feet for fixed mounting points, and then we have the custom-fit kit for your Sorento. So make sure, in order to get all of those things that matches your vehicle, to use our fit guide here at etrailer.com to find the kit for you. What impresses me with this one, is the ability to move the crossbars wherever I want them to go. That's not usually something you would find for a fixed mounting point vehicle. So, here I have it set to 34 inches, just because that's where the backs of the mounting holes are in the back of the Flush Rails.
You can move that forward though up to 36 inches if needed, which is where the end caps, or the top caps are on those rails. So, here's the roof measurements with this too, because every roof rack will have a different height that it adds to top of your roof. Ours here is at top of the glass roof to top the crossbar, 4 1/2 inches. That's where your cargo is gonna sit. If you have skis and snowboards, especially the skis with the extra tall bindings, you wanna make sure that they don't hit your roof.
So if that's the case, you know that clearance, and you can take a look at accessories that give you more clearance if needed. The second measurement is the space underneath the cross bar. So, here we have it at 3 1/2 inches. So, some accessories have clamps that go around. This is gonna be plenty of space, even for those with wing bolts and wing nuts, and U-bolts that go around.
As for overhang, you have a little bit, but not that much with the 47 inch crossbars. You can actually adjust it, or offset it, to one side or the other if needed. But you are limited to around, we have one inch of clearance here. You can maybe push it out to an inch and a half, or two inches if needed. So, not that much for some accessories that require a certain amount of overhang clearance. So for security, if you have the track-mounted accessories, the end cap pops open just like that. So, then you don't really have that much security for those. Make sure you get get locking T-track-mounted accessories, if that's what you're looking for. Another thing is the tower. So, you have these plastic locks included, with the ability to upgrade to metal lock cores. So for the plastic locks, you just need to use a flathead screwdriver, or the back of a key, and you can now pop that end cap off and get access to that Allen key tightening down those clamps. So, in terms of the turning fit, you may wanna check out those metal lock cores as an upgrade. Installing this is actually pretty simple. You just have two different clamps, you have the special foot pad, and then you have the bolt that goes onto your tower. So we're gonna start with the tower, and then I'm gonna show you how to get that onto the crossbar, and then we're gonna get it onto your flush rails. So first, this is gonna be our first bolt. So, this is the bolt on the tower, and then we're gonna get this clamp onto it. So, see how we have this hook part that goes out, and then we have the two prongs. Well, those two prongs go into your tower, fit that bolt through, and make sure this is sticking out. And then get your rubber flip pad. All of them are gonna be the same, which is great, because you don't have to worry about getting them mixed up. Then this is gonna fit over that clamp, and then into your tower. Finally, get the clamp with a little slot on top. That slot is gonna fit into the first clamp. So go up and then down, and then make sure that there's space for that bolt to peek through. So, that bolt is peeking through, so you can get this nut onto there. So, see how you have that Allen head side open there, and you have the threaded side on the other one. You're gonna get that onto your tower, and you have to move your tower a little to get it lined up, but just gently, or lightly, thread it on there. Now, make sure that the end cap is off of your crossbar. You're gonna slide this tower through, bring that all the way down, feel free to put the end cap back on. And then you're gonna bring your crossbars and your tower up onto your flush rails. Just get them in the general location you want them in. And then, you're gonna measure for the width of the crossbar, so make sure there's an equal length on each side. But, you're also gonna measure for the crossbar spread, so you can see how far apart from the other crossbar you want it to be. You're then gonna use your tool to tighten down on that bolt. So, this is gonna tighten the clamp to your flush rails. This has a torque setting, so just keep turning until your tool clicks. Once all four towers are tightened down, the next step is to get your plastic lock that pops in through the end cap of your tower. And if you're using, or maybe you upgraded to metal locks for your tower, this is the time when you install it now. Your tower end cap is just gonna fit into your tower, and you have to push in for it to lock into place. And then you're gonna just use a flat head screwdriver to turn that lock into the locked position. And that's how you know that your end cap is secure on there. So, just double check that all the towers are properly clamped down, and that all the end caps are locked and on your towers. And after that, that's it for the install. You're ready to hit the road. And that was a look at the Thule roof rack system with the 47 inch long WingBar Evo Crossbars and the custom fit kit, for your 2019 Kia Sorento..
Average Customer Rating: 4.7 out of 5 stars (67 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.I'm using these Thule Evo Fixpoint Feet #710701 in conjunction with the FitKit #87003 to mount my DropRack XL to the rooftop of my 2021 Jeep Grand Cherokee. Eventually I'll get a Thule Rooftop Cargo Box to transport our RV camping supplies for which we don't have enough room in the Jeep or our Aliner RV camper. For now, I'm also using the setup to transport 4' x 8' plywood sheets for a DIY home project. This is the perfect solution for a multi-use application that'll enable us to accomplish more projects around the house as well as on the road.
Install was pretty straight forward. I did have to drill holes on the roof gutters for the fixed point bolts (2024 Mazda 3 5dr). Shipping was delayed by a month but it was not due to etrailers fault.
Got exactly what I needed! Perfect fit on the 2024 Q7.
I feel that the service I've received from e-trailer was superb. They made excellent suggestions and I'm looking forward to getting the new rack installed ... again, with their video help!!
Easy to install and hold crossbars very securely.
We just purchased a 2019 Hyundai Santa Fe as our retirement vehicle for traveling. We wanted to install cargo accessories but the dealer prices were WAY to high. After researching for several days we found etrailer.com. The prices were the best we found and the service was outstanding! We installed a Thule roof rack system that fits flawlessly and allows the panorama sun roof to plenty of roof to operate. The videos made in really easy to install. We also installed a trailer hitch system. The Tekonsha Trailer Wiring kit was also a piece of cake to install. If you're hesitant to work on electrical systems, there's no need to be afraid. It's actually easier than it looks in the video.
The Curt Trailer Hitch gave me major headaches. The delivery company banged the box up pretty badly. Apparently it tweaked the hitch just enough so that the holes were misaligned. No problem, after talking me through the installation one more time to be sure it was damaged, they shipped a new unit. The second hitch went in fine. It took a while, and it's not as easy as it looks in the video, but I'm 67 years old I did the installation myself...
Overall, I gave five stars because the price match guaranty makes it a wise choice price wise. he videos are a big help during installation. But the real difference is the service. A lot of folks provide good service to make a sale, but etrailer goes the extra distance to provide great service afterwards. That's unique! Thanks etrailer!
Bought the Thule Wingbar Evo 118 crossbars and Thule Evo Raised Rail footers and installed them on my 2016 RAV4. Pretty easy to install and I did watch a few videos online to make sure I was doing everything right. I like the new raised rail system from Thule as it is clamp style versus the rubber strap - both work very well, but the newer clamp system is nice because the tool you use to tighten the footings clicks when it reaches the right tightness so you don't over tighten it. I recommend these rails and the footings (Thule 710401) as the system is quiet when driving and looks good.
Product arrived quickly. Easy to install. Works as expected.
Quick, easy, and solid installation.
I would have appreciated being informed that the Thule Wingbars were not in stock!
Split rubber on the T-nut channel is a nice feature, allowing mounted equipment to be moved in or out without changing the rubber pieces. 47" bar is just long enough to get to the front (wider) portion of a 2019 Impreza's rails, and is a good length -- it gets to the edge of the car without making me worried that I'll bump my head on it.
I purchased a full direct mount Thule kit for my 2018 Infiniti Q30s. etrailer.com made it very easy, pairing what I needed at a great price. My kit arrived earlier than estimated and looks great on my car. If there was one negative, it would be the Thule instructions. Written in multiple languages to cover thier market made installation a bit challenging but it all worked out.
Nice strong but light crossbars - my only gripe is with installing the weather-stripping which I would give an 85 on a 0-10 frustration scale. Really please with the final product and like the dimensions for my 2017 Alltrack.
Great service, good website info, super speedy delivery . . I installed the roof racks on my car in two hours only two days after I ordered them. Thanks!
Lightweight, strong, good quality crossbars. They look professional and sporty at the same time. Good purchase.
Easy and quick to install, very durable too. 10/10!
Everything was Great
Perfect fit and easy installation. Highly recommend for a lower profile rack. Also allows sunroof to vent on 2016 Lexus RX350. Haven’t driven with them on yet so I don’t know how road noise is at this time.
Typical Scandinavian DIY instructions, so lots of drawings but minimal wording. Just go slow and double check. Results were quite good.
Nice company, easy to deal with VERY KNOWLEDGEABLE STAFF.
I live 10 minutes from aThule wRehouse, but I would rather deal with etrailer.
These bars were part of my total order and I am satisfied with their performance. It’s nice when a product performs as intended
The surfboard racks worked great easy installation easy removal and the locking system was nice too.
Overall extremely pleased. The crossbars are much sturdier then what the oem ones. Not to mention they look a whole lot better
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.